ASHLEY W549-48 TV Stand Instruction Manual
- June 3, 2024
- Ashley
Table of Contents
ASHLEY W549-48 TV Stand
IMPORTANT SAFEIY NOTICE
READ CAREFULLY BEFORE BEGINNING THE ASSEMBLY
- Always use proper tools.
- Follow the assembly steps in order.
- Be sure to check all packing materials carefully for small parts that may have come loose inside the carton during shipment. If parts are missing, contact the retailer from which you purchased the product to obtain any missing parts.
- Periodically check to ensure that all connectors (bolts, screws, etc.) are tight.
- Keep the instructions for future reference.
- Some assembly may involve attaching glass or mirrors. glass or mirrors, as severe injury may result if the glass or mirror breaks. Never handle large pieces of glass or mirrors by yourself.
- When assembling products that have electric cords (lamps, lights, etc.), always (1) make sure the electrical cord is unplugged before assembly and (2) be careful not to twist the electrical cord during assembly.
- When assembling shelves or entertainment centers, do not stand on lower shelves in order to assemble upPer shelves-use a step ladder.
- Do not stand on tables, including but not limited to, end tables, coffee tables, and dinner tables, as tables are not to support the weight of a person.
- Where assembly instructions state that the assembly requires two or more people, do not attempt by yourself as there is a risk ot injury.
NOTE:
ASHLEY FURNITURE INDUSTRIES, LLC DISCLAIMS ANY LIABILITY FOR DAMAGES OR
INJURIES WHICH MAY OCCUR DUE TO FAILURE TO PROPERLY FOLLOW ASSEMBLY
INSTRUCTIONS, PROPERLY ASSEMBLE THE PRODUCT, OR PROPERLY USE THE PRODUCT.
NOTE:
YOUR UNIT MAY LOOK DIFFERENT IN APPEARANCE FROM THE ONE SHOWN IN THE
ILLUSTRATIONS ON THIS INSTRUCTION SHEET.
Parts List
NOTE:
THE UNIT SHOULD BE ASSEMBLED BY TWO OR MORE PEOPLE. DO NOT TIGHTEN ANY BOLTS
UNTL ALL BOLTS HAVE BEEN STARTED!
HARDWARE
NOTE:
HARDWARE IS STORED BACKSIDE OF THE FRONT FRAME.
NOTE:
ASSEMBLY INSTRUCTION FOR MULTIPLE UNITS, THE PARTS/LABEL INDEX ARE SEPARATED
FOR DIFFERENT UNITS
THE PARTS ARE LOCATED INSIDE THE BOX AS BELOW
Installation
NOTE:
IF THE UNIT IS PLACED ON AN UNLEVEL SURFACE, PLACE A LEVELER UNDERNEATH ONE
FOOT UNTIL THE UNIT IS LEVEL. BREAK OFF ANY PROTRUDING
SEGMENTS.
WARNING
The use of the included tipping restraint may reduce, but not eliminate, the
risk of furniture tipping Over.
Follow the instructions on the plastic bag for proper installation.
SIGNATURE DESIGN BY ASHLEY® All Rights Reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>