PULIDO DS01 Smart Lock Instruction Manual
- June 3, 2024
- PULIDO
Table of Contents
Smart Lock
Instruction Manual
DS01 Smart Lock
(Note that the switch must be initialized without registering an administ,and the switch will be invalid afte「ente「ing the administrator)
Part 1: Local operation instructions of the smart lock
The first three password users or card and fingerprint users registered first
after the product is initialized are the administrators by default. For
example, an administrator has been registered in the smart lock. Adding and
removing users again requires the administrator to be authenticated first;
When no user is entered, any fingerprint and initial password 123456 can be
unlocked. After registering the fingerprint or password card, the illegal
fingerprint and password card will not be unlocked:1. Add fingerprint.
password and card locally on the lock end:
1. Add fingerprint, password and card locally on the lock end:
- Press any button to wake up the system, press the ‘I” + “fr button, the blue light of the fingerprint lamp flashes, and the voice prompts tlease’Verify administrator” (if no fingerprint or password has been entered, use any fingerprint or the default password “123456” to verify). If the verification is successful, the voice prompts ‘Please start to enter, and enter the fingerprint, password or card you want to set. Enter. If successful. the green light will flash once, and the voice prompt ‘Please enter again’. If the entry fails, the red light will flash once, and the green light will be solid on and the voice prompt successfully’, indicating that it has been added successfully.
The lock end locally deletes all fingerprints, passwords, door cards and Bluetooth data:
- Press any key to wake up the system, press the ‘888″ +11’ key, the red light of the fingerprint light flashes. and the voice prompts “Please verify the administrator” (if no fingerprint or password has been entered. use any fingerprint or default password ‘123456’ verification). If the verification is successful, start to restore the factory settings, the restore is successful. the green light is on for 1 second, and the voice prompts “factory reset Is successful’, and all fingerprints, passwords, keycards and Bluetooth binding data are deleted. 2
- Forcibly restore the factory settings. remove the rear panel screws (K I), press and hold the reset button on the rear panel for 5 seconds, the red light of the fingerprint light flashes, release, the light turns green, and the voice prompts ‘restore to factory settings successful’, all Fingerprints, passwords, key cards and Bluetooth binding data are deleted.
Lock-end local volume adjustment
- Press any key towake up the system, press the ’21*• “It key, the blue and blue light of the fingerprint light lashes. and the voice prompts ‘Please verify the administrator” (if the fingerprint or password has not been entered, use any arbitrary fingerprint or default Password ‘123456″verify). After the verification is successful, the fingerprint light turns green and makes a beep to adjust the volume:0 mute 1 low volume 2 medium volume 3 high volume;
4. Product parameters and detailed description
No. | Function | Content | Detailed description |
---|---|---|---|
1 | Howtounlock | Fingermint+passrord+ icardrikey+ mobaephonegraffitAPP | |
2 | Numberofadministrators | 3digits | The 3 groups entered in the front are |
defaulted to administrators
3| Numberofusers| 197bits| Total capacity of 200 groups (including
administrators)
4| Fingerprints| 100pieces| Fingerprints need to be re-entered 5 times (please
enter from multiple angles)
5| Password| 100groups| The password needs to be entered twice with the w key
to confirm (the 6-8 digit password must be the same twice)
6| Magneticcards| 100sheets| The card can be entered once;
7| Dummypasswordlength| .1.16bits| This product has a virtual an-peeping
password: you can
enter garbled characters before and after the registered password
8| Lotwoltagealarm| 4.7Vt0.2V| When the voltage Is lower than 47V, the red
Indicator light will continue to flash 5 times rapidly. And prompt “low
battery, please replace the battery’, can continue to unlock. when the voltage
is lower than 45V, the red indicator light will continue to flash 5 times. can
not unlock.
9| Quiescentcurrent| 560uA|
10| Dynamlccurrent| >250mA|
11| Supplyvoltage| 6V| The voltage when the new battery is fully charged
(please choose a high-quality alkaline 1.5V batten’)
12| Emergencypowersupply| 5VDC| U$B type-C interface
14| Operatingtemperature| -25″C-70t|
15| Operatinghumidity| 20%-90%RH|
16| VolceNavigation| EnglishiChinesevoice| Wake up the keyboard and enter:
“8899W” to quickly
switch between Chinese and English after the administrator is successfully
authenticated
17| Erroralarm| support| 10 consecutive trial and error, lock for 1 minute
16| Electronicanti•lock| Admincanunlock| Push the lock button to
electronically leek or unlock the
lock. (After unlocking, the first three groups of administrators can unlock
normally. but ordinary users cannot unlock and prompt: “The door Is locked’)
19| Quickie&| Ouiddockoutsidethedoor| Click the ‘lock icon” on the panel to
lock immediately
20| Wlreddoorsensor| (Onlysupporlsopti onalproducts)| After Installing the
door sensor, plug in the will cord
and reinstall the battery, the door sensor will take effect. and the door
sensor will automatically lock Immediately when the door is dosed: or select
the door sensor to activate or close on the APP)
21| fastsleep| numberkeyfastsleep| Long key to quickly exit the system
Reminder:Pleasesloreyourmechanicalkeyoutdoo sforbackup!
Part II: Tuya APP Operation Instructions
https://smartapp.tuya.com/tuyasmart
-
APP installation (scan QR code)
Or search and download and install the “Tuya Smart” APP from the application market.After installation, follow the prompts to register and log in.
-
Distribution network connection lock Start the distribution network process: If no fingerprint or password is entered, press any button or fingerprint to enter the distribution network mode, and the fingerprint or password has been entered, the machine automatically enters the distribution network mode;
Open the APP, you can add devices through the manual or automatic discovery window. After the device enters the network configuration mode, the APP will automatically pop up the device discovery window. No display if multiple operations. Please press the fingerprint or password key once to wake up the smart lock device and let the device turn on the Bluetooth broadcast. -
Add a device: (please turn on your phone’s Bluetooth)
Fingerprint password lock when fingerprint or password is not registered. The device will not turn on the Bluetooth network configuration mode. Before connecting the Tuya APP, you need to press the fingerprint or password first, then the device wakes up and turns on the network configuration mode; -
Add unlock method
The first method: You can directly add fingerprints, passwords and cards in the specific user interface under ‘Member Management”; The second method: add in the settings interface; The difference between these two methods: The first is to add unlocking methods for a user (such as fingerprints, passwords, cards); The second is to correspond to a certain user under the specific unlocking method (such as fingerprint, password, card). The method is as follows: I -
Fingerprint management: Add fingerprints, select users, and follow the prompts to enter
-
Card management:
-
Password management:
Add password: The password can be randomly generated, or it can be edited and entered by the user (6.8 digits). -
Temporary password Choose an online password or an offline password according to the actual situation;
-
Dynamic password
This feature only supports smart locks with touch codes. The dynamic password operation process Is as follows: Swipe left on interface 1: enter interface 2: click “Get dynamic password’ on interface 2; generate a dynamic password: enter the password to unlock the smart lock. -
Member management Click ‘Member Management”
-
The family member added for the first time Is the administrator, click “+” in the upper right
-
Other members: Click the “+” in the upper right
-
Factory reset and unbind Unbinding on the APP side On the fourth interface, click ‘Unbind and Clear Data’ to unbind, and all data in the device will be cleared. If the APP is not connected to the smart lock, it can also be remotely operated to unbind. After the device is searched by Tuya APP next time, the device will be restored to factory settings.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>