hama 200133 USB Multiport Adapter Instruction Manual

June 3, 2024
Hama

hama 200133 USB Multiport Adapter

Overview

Operating instruction



The maximum supported Resolution

  VGA HDMI 1 HDMI 2
Single Port Connected 1080P/60Hz  
  2160P/30Hz
    2160P/30Hz
Dual Ports Connected 1080P/60Hz 1080P/60Hz
1080P/60Hz   1080P/60Hz
  1080P/60Hz 1080P/60Hz
Triple Ports Connected 1080P/60Hz 1080P/60Hz 1080P/60Hz

Package Contents

  • USB-C Multiport
  • These operating instructions

Safety Notes

  • Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.
  • Do not open the device or continue to operate it if it becomes damaged.
  • Do not operate the product outside the power limits given in the specifications.
  • Do not modify the product in any way. Doing so voids the warranty.
  • Keep this product, as all electrical products, out of the reach of children! Use the product for its intended purpose only.
  • Protect the product from dirt, moisture and overheating, and only use it in a dry environment.
  • The product is intended for indoor use only.
  • Do not use the product in the immediate vicinity of heaters or other heat sources or in direct sunlight.
  • Do not use the product in moist environments and avoid splashes.
  • Do not use the product in areas where the use of electronic devices is not permitted.
  • Do not drop the product and do not expose it to any major shocks.
  • Dispose of packaging material immediately according to locally applicable regulations.

Warning

  • Find out the maximum output current capacity of the USB port on your device. To do this, consult the operating instructions or ask the manufacturer.
  • Common values are 500 mA for USB-A 2.0, 900 mA for USB-A 3.0, and up to 3000 mA for USB-C.
  • Ensure that the cumulative current draw of all USB devices connected to the hub/multiport adaptor does not exceed this value.

Note

  • To be able to use the charging function, the device must support Power Delivery (PD) or Thunderbolt-3/4.
  • To be able to use the VGA or HDMI™ function, the device must support DisplayPort Alternate Mode or Thunderbolt-3/4.
  • VGA & HDMI™2, or HDMI™1 and HDMI™2: MST (Multi-Stream Transport) support for simultaneous use of two monitors displaying different contents.
  • Passive VGA/HDMI™ cables (without chipset / signal converter) must be used for MST.
  • The MST function is dependent on the graphics card, operating system and monitor used. For more information, consult the operating instructions or contact the manufacturer.
  • The MacBook must have an Intel, M1 Pro, M1 Max processor (CPU). The Apple M1 chip does not support MST!

Startup and Operation

  • Switch on your computer and boot the system.
  • Connect the product to two free USB ports on your computer.
  • You do not have to install drivers; the computer will automatically recognize the product.
  • If necessary, follow the instructions for your operating system.
  • In order to use your devices, plug them into the product one after the other.

Warranty Disclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/ or safety notes.

Technical Data

Operating voltage / current consumption 5– 20V ⎓ max. 5A
Compatibility USB-C port
System requirements Mac OS 10.8 ≥
USB specification USB 3.2 Gen1

Note

  • If there is interference or the product no longer responds, unplug the product, wait a few seconds and then plug it in again.

Customer Support

Service & Support

www.hama.com

+49 9091 502-0

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals