4moms 4M-005 Mamaroo Bouncer Instruction Manual
- June 4, 2024
- 4moms
Table of Contents
Instructions for Strap Fastener Attachment to MamaRoo®
For Model Numbers: 4M-005, 1026, 1037
HAZARD:
Crawling infants can become entangled in the straps under the seat when the
unit is not occupied, Rosina a strangulation hazard,| To prevent risk of
strangulation, Strap Fastener must be installed at at times.
---|---
STRAP FASTENER PARTS
Strap Fastener and Hook-and-Loop Strap colors may vary
MAMAROO PARTS
STEP 1
Pull BOTH Harness Straps (F) backward through Seat Slots to remove the Harness
from the Seat.
STEP 2
Note the position of the NY” on the Harness Straps (F). Place the Strap
Fastener onto the Harness Straps (F) so that the Center Slot (D) Is located at
the “r on the straps.
Make sure Warning Tag (A) is on top.
STEP 3
Take one Harness Strap (F) from Strap Fastener Center Slot (0) and weave
through additional 3 Strap Fastener Slots (C1, C2, C3), moving towards the
Hook and Loop Straps (B). Repeat with the second harness strap on another
side. Step 3 must be done on BOTH SIDES of the Strap Fastener. The Harness
Straps (F) must be correctly threaded through the Strap Fastener AT ALL TIMES.
STEP 4
Thread the two Hook-and-Loop Straps (B) of the Strap Fastener through the
slots on the MamaRoo Seat. Then pull them through to the front of the Seat.
STEP 5
Attach the two Hook-and-Loop Straps (B) to each other. The Hook-and-Loop
Straps should be tight enough that the Strap Fastener rests against the back
of the Seat. The strap Fastener must be securely attached to the Seat AT ALL
TIMES by the Hook-and-Loop Straps.
STEP 6
Re-thread the MamaRoo Harness Straps (F) through the slots in the MamaRoo Seat
and pull them through to the front of the Seat
STEP 7
Installation Complete. There should be no slack left in the MamaRoo Harness
Strap (F) between the back of the MamaRoo Seat and Central Rail (E).
TEST INSTALLATION by Ightly pulling on the MamaRoo Harness Straps (F) from
behind the seat Onbetween the Seat and Central Rail (E)). If Strap Fastener is
instated correctly, the MamaRoo Harness Straps should not pull through to the
back of the Seat.
STEP 8
Adhere included Warning Sticker to Central Rail (E) of MamaRoo.
WARNING
Baby can STRANGLE in STRAPS
- Secure straps tightly to seat pad through Safety Clip to prevent hanging strap loops.
- Make sure Safety Clip is installed at strap ‘Y’ with straps threaded through both sides.
- TEST INSTALLATION by lightly pulling on straps behind the seat pad. Make sure straps do not pull through.
CLEANING
MAMAROO SEAT FABRIC:
Detach Hook-and-Loop Straps from the front of MamaRoo’s seat. Pull MamaRoo
harness straps back through MamaRoo seat slots. Do not remove the Strap
Fastener from MamaRoo harness straps to clean the seat fabric. Remove seat
fabric by unzipping (x2). Follow care instructions.
HARNESS STRAPS AND STRAP FASTENER:
Detach Hook-and-Loop Straps from the front of MamaRoo’s seat. Pull MamaRoo
harness straps back through MamaRoo seat slots. Do not remove the Strap
Fastener from MamaRoo harness straps. Once disassembled, use a sink or other
basin and allow the straps to dangle from the central rail into soapy water.
Do NOT immerse the central rail into the water. Once clean, rinse and let dry
before reassembling the unit
QUESTIONS?
Contact [email protected]
https://qrco.de/bdBdaU
Follow included instructions or scan here for Assembly Video