CEJN Safety Reel User Guide
- June 3, 2024
- CEJN
Table of Contents
CEJN Safety Reel
Safety
WARNING!
The products are intended for use by knowledgeable persons having the
technical skill necessary to evaluate their suitability for specific
applications. Read
all safety instructions carefully before attempting to install, operate, or
maintain this product.
- The cable reel may only be installed or repaired by a qualified technician (e.g. an electrician). The cable reel has a thermal overload protector and needs to be correctly installed, otherwise, there will be a high risk of electrical shock. This cable reel has undergone function and quality tests in accordance with SS-EN 61242_1997/A2_2016/C1 and SS-EN_61316.
- Follow the specific national installation regulations. The reel is suitable for operating indoors and outdoors, IP44. When replacing the plug, only use a plug complying with IEC 60309-1 or IEC 60309-2, a minimum of 10A, IP44 may be used.
- The cable reel and the cable must be checked for damage and wear regularly before each use. Any damage or defects must be repaired immediately. A broken cable must be replaced!
- Equipment connected to the cable reel must not exceed the maximum permitted power consumption for the cable reel. Arbitrary modifications to the cable reel are forbidden for safety reasons.
- DANGER!
Contact with live parts may cause electrical shock, injury, or death! Never open the cable reel when it is connected to the mains. The power supply must
always be disconnected before service or repairs.
Installation
For more detailed information regarding installing and operating the reel, see our instruction videos at www.cejn.com/safetyreel.
Assembly
Stop ball position
The stop ball is allowed to be moved inwards. The spring force requires no adjustment. See video instructions for further information at www.cejn.com/safetyreel.
Operation
Pulling out the cable
- Pull out the cable to the required length.
- To lock the cable, listen for the latch to engage with a “click” while slowly pulling out the cable a short distance.
Retracting the cable
To unlock the cable when you have finished using it
- Simply pull it out a short distance and listen for the latch to stop “clicking”.
- Then let the cable slowly retract into the housing.
Slow retraction
The new Safety Reel is equipped with a sturdy centrifugal breaking of the
drum, combined with a strong spring force, giving a slow and firm retraction
that keeps the working environment safe.
The cable cannot be fully retracted
If the cable gets jammed when retracted, simply pull out the cable to its full length and let it retract freely without assistance. If you experience further problems or other malfunctions, contact your local distributor for guidance. See videos at www.cejn.com/safetyreel for more guidance.
Malfunction/action
The connected equipment does not start or suddenly switches off and cannot
be restarted
Make sure that the cable reel is connected to the mains. Check that all fuses
are intact. If the fuse is intact, it is probably the heat-sensitive overload
protection that has turned off the power supply to the cable reel. Make sure
that the connected equipment is not overloading the cable reel. Before you
turn the power supply back on, any connected equipment must be disconnected
from the cable reel. Once the cable reel has cooled down, after about five
minutes, you can press the reset button.
Maintenance
- Carry out regular checks that there are no problems with the cable, cable guiding and external parts.
- Any damage or defects must be repaired immediately.
- Repairs and maintenance must be carried out by a qualified technician only.
- Only original spare parts must be used!
Disposal/Recycling
IMPORTANT!
Help us to take care of the environment. When disposing of the cable reel,
please do so in accordance with local environmental regulations.
Warranty
CEJN AB provides a two (2) year warranty from the date of manufacture. Contact your retailer concerning warranty inquiries.
Spare parts
For safety reasons, only original spare parts must be used. For a complete overview of spare parts, see www.cejn.com/safetyreel.
CEJN AB
Hasslumsvägen 33
S-541 25 Skövde
Sweden
www.cejn.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>