Lightology 2783-695 Chelsea Chandelier Instruction Manual

: June 3, 2024
: Lightology

Table of Contents

2783-695 Chelsea Chandelier
MOUNTING THE FIXTURE (Fig.1)
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

INSTALLATION INSTRUCTIONS
Item#2783-695 (New. 2022/01/20)
READ AND SAVE THESE INSTRUCTIONS

2783-695 Chelsea Chandelier

WARNING ! SUPERPOWER OF FATF USE ORCIR CUITBREAKER .
ASSERTIVENESS! COOPER LE RANCOUR AU NIVEAU DES FUNGIBLES OU DU DISJONCTEUR.

MOUNTING THE FIXTURE (Fig.1)

Shut off power at the fuse box or circuit breaker box andremove the old fixture including the mounting hardware.
Carefully unpack your new fixture and lay out all the partsin a clean area. Take care not to misplace any small parts-necessary for installation.
Secure rod (H) onto all thread (I) on fixture body.
Place rod assembly (G) over all thread (E) on rod (H).Carefully pass the wires through rod (H) during assembly.
Determine the desired hanging height and thread rods (F1,F2 and F3) to the all thread (E) of rod (H). Attach canopy(C) by threading onto rod (F1). Carefully feed wires througheach rod as you assemble.
Note: Remove all thread, ifinstalling with one 6” rod only.
Attach mounting plate (A) to junction box (Not included)with mounting screws (B) (Size: #8-32N*L0.5”). The side ofthe mounting plate (A) marked “GND” and two convexpoints must face out.
CONNECTING THE WIRES (Fig. 2)
Connect the electrical wires as shown in fig 2, making surethat all wire connectors are secured. If your junction boxhas a ground wire (green or bare copper), connect thefixture’s ground wire to it. Otherwise, connect the fixture’sground wire directly to the mounting plate (A) using thegreen screw provided.
Tuck wire connectors neatly into the junction box.
FINISHING THE INSTALLATION (Fig.1)
Place canopy (C) over mounting plate (A) and secure withscrews (D).
Place candle covers (K) over sockets (J).
Place cloth shade (L) onto candle cover (K). Adjust clothshade（L）if necessary.
Install (3) three candelabra base bulbs (M) up to 60 wattseach or CFL or LED equivalent (not included) inaccordance with the fixture specification—DO NOTEXCEED THE MAXIMUM WATTAGE RATING! (NE PASDEPASSER LA PUISSANCE NOMINALE MAXIMALE!)

Lightology 2783 695 Chelsea Chandelier - fig Your installation is now complete. Return power to the junction box and test the fixture.
Note: Illustration (Fig.1) on this manual is for installation purposes only. It may or may not be identical to the fixture purchased.