noctua NA-IS1-14 Sx2 Installation Guide
- October 28, 2023
- Noctua
Table of Contents
NOCTUA NA-IS1-14 Sx2
INSTALLATION MANUAL
NA-IS1-14 Sx2
For case fan applications, either the supplied self-tapping screws or the
included NA-AV3 anti-vibration mounts can be used to sandwich the spacer
between the fan and the case panel. For radiator mounting, both M3 and UNC
6-32 screws are supplied.
Included mounting parts:
2x NA-IS1-12 inlet
spacers
8x NA-AV3 anti-vibrations mounts
|
8x NM-SFS4-BK long fan screws
8x NM-SFS5-BK radiator screws (M3)
|
8x NM-SFS6-BK radiator screws (UNC)
Case fan installation with NA-AV3
| 
| 
---|---|---
Case fan installation with screws
| 
| 
---|---|---
Radiator installation
| 
| 
---|---|---
Caution
We supply both M3 thread (small head) and UNC 6-32 thread (bigger head)
screws. Please make sure to select the correct screw type for your radiator
(refer to manufacturer specifications or contact manufacturer)!
|
---|---
Warranty, support and FAQs
Even with high-grade products and strict quality control, the possibility
of defects cannot be eliminated entirely. Therefore, we aim at providing the
highest possible level of reliability and convenience by offering a warranty
period of 6 years and direct, fast and straightforward RMA service.
Should you encounter any problems with your NA-IS1-14 Sx2, please don’t
hesitate to contact our support team at
[email protected].
Please also consult the FAQ section on our website:
www.noctua.at/faqs
http://mobile.noctua.at/manuals/accessories/NA-IS1-14_Sx2/index.php
Scan this code to display multilingual manuals on your phone.