KROM Kayros RGB Advanced Wireless Gamepad User Manual
- June 3, 2024
- KROM
Table of Contents
- KROM Kayros RGB Advanced Wireless Gamepad
- DEFAULT FUNCTIONS & ELEMENTS
- PAIRING AND CONNECTING THE GAMEPAD
- [PC mode X-lnput)
- EXTRA BUTTONS & MAPPING FUNCTION
- Reconnect
- Vibration levels
- RGB settings
- Macros settings
- Restore factory settings
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
KROM Kayros RGB Advanced Wireless Gamepad
DEFAULT FUNCTIONS & ELEMENTS
PAIRING AND CONNECTING THE GAMEPAD
Nintendo Switch™ and PC Wireless mode:
- With the controller in OFF. press and hold the SYNC button for 3 seconds till the lJ LEDS flash, now the gamepad is in pairing mode.
- Search for devices on your console settings or PC bluetooth settings.
- The gamepad should connect automatically.
Android [v.10 and above) and iOS (vl3.LI and above) mode:
- With the controller in OFF, hold SYNC+ X buttons togheter for 2 seconds till the LEDs flash quickly, now the gamepad is in pairing mode.
- Search for “Xbox One Controller” devices on your Smartphone Bluetooth settings.
- Connect to gamepad, LE□l, 2 & 3 will remain light up after successful! connection.
Note: Only games that supports PSLJ/Xbox One controllers are compatible.
PC mode [X-lnput)
Wireless connection:
- With the controller in OFF, hold SYNC+ Y buttons togheter for 2 seconds till the LEDs flash quickly,
- Search in your PC Bluetooth settings for the gamepad and pair both devices.
Note: In Wireless mode the triggers dont work as analogic.
Wired connection:
- With the controller in OFF, hold R3 button and connect the controller to PC via USB cable.
- Connect the gamepad, LED will show the player assigned and remain ON after connected.
EXTRA BUTTONS & MAPPING FUNCTION
Turbo and Auto-Fire mode:
Buttons A, B, X, Y, Land R are compatible with Turbo and Auto-Fire functions.
Enable Turbo and Auto-Fire:
Hold the TURBO button and press any of the buttons above to set the Turbo
function, if you also want to set the Auto-Fire press the button selected once
more while still holding the TURBO button. LED should keep blinking if Turbo
/Auto-Fire set succesful.
Disable Turbo and Auto-Fire:
Turn OFF the TURBO button. Press and hold the TURBO then press the previously
selected button twice.
To reset all Turbo and Auto-fire buttons, press and hold TURBO and – buttons.
Setting the speed for Turbo and Auto-fire Button:
Press and hold the previously selected button.
- To increase speed, tilt the right analog stick up.
- To decrease speed, tilt the right analog stick down.
There are 3 levels of speed: 5 times per second, 12 times per second and 20 times per second. The default level is 12 times per second.
Reconnect
Press HOME button 1 second for wake up the gamepad, it will search and pair to the last device connected.
Vibration levels
The gamepad has q levels of vibration: none, weak, medium and strong To adjust the vibration level:
- Connect the gamepad successfully to your device.
- Press and hold TURBO button and press+ button to increase or – to decrease vibration.
RGB settings
- Turn ON/OFF LEDs:
- Hold Ll + Rl buttons for 5 seconds.
- Brightness level:
- Hold SET button+ □PAD LEFT or RIGHT to adjust it.
There are two groups of LEDs:
- Group 1: ABXY+Home+Left Thumbstick
- LED mode:
- Hold SET button and press □PAD UP or DOWN to switch between modes.
- Group 2: LED Stripe
- LED mode:
- Hold SET button and press + or – button o switch between modes.
Macros settings
The buttons ML and MR on the back of the gamepad can be remapped with macros.
- When the gamepad is ON, press and hold ML or MR for 5 seconds, LED2 and LED3 will be flashing, macro mode is ON
- Press any sequence of the following buttons A/B/X/Y/L/ZL/R/ZR/UP/DOWN/LEFT/RIGHT, then press again ML or MR, and the LEDl will be always on.
- To clear any macro previously recorded, press and hold the ML or MR button for 8 seconds, LEDl and LEDq will be flashing, then release the ML or MR button.
Restore factory settings
- Press HOME for 10 seconds.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>