hama 200134 USB-C Multiport Qi Charging 12 Port Instruction Manual

: June 3, 2024
: Hama

Table of Contents

200134 USB-C Multiport Qi Charging 12 Port
Package contents
Safety instructions
Commissioning and operation – Multi-port
Commissioning and operation – Inductive charging
Warranty disclaimer
Technical data
Declaration of Conformity
Documents / Resources

200134 USB-C Multiport
Qi Charging 12 Port
Instruction Manual

200134 USB-C Multiport Qi Charging 12 Port

Multiport Function

hama 200134 USB-C Multiport Qi Charging 12 Port Wireless Charging Function

hama 200134 USB-C Multiport Qi Charging 12 Port - FIG5

Connect a suitable USB-C power supply unit to the USB-C PD input on the USB-C multi-port.
When doing so, consult the operating instructions for the USB charger. hama
200134 USB-C Multiport Qi Charging 12 Port - FIG6

Package contents

USB-C multi-port
These operating instructions

Safety instructions

Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.
Do not open the device or continue to operate it if it becomes damaged.
Do not operate the product outside the power limits specified in the technical data.
Do not modify the device in any way. Doing so voids the warranty.
As with all electrical products, this device should be kept out of the reach of children.
Use the product only for the intended purpose.
Protect the product from dirt, moisture and overheating and use it in dry rooms only.
The product is intended only for use inside buildings.
Do not use the product in the immediate vicinity of heaters, other heat sources or in direct sunlight.
Do not use the product in a damp environment and avoid splashing water.
Do not use the product in areas in which electronic products are not permitted.
Do not drop the product and do not expose it to any major shocks.
Dispose of packaging material immediately in accordance with the locally applicable regulations.
Only use the article under moderate climatic conditions.
Do not place any liquid-filled vessels such as flower vases on or in the immediate vicinity of the product. The vessel may topple over and the liquid can then impair the electrical safety.
Do not bend or crush the cable.
Ensure that the product is not covered up by textiles, metal or other objects in order to avoid damage caused by overheating.

Warning – magnets
People with pacemakers should keep away from the magnets. The magnets can negatively affect the function of the pacemaker.
Do not place any bank or similar cards with magnetic strips or magnetically sensitive objects on the product. The data on the cards could be damaged or completely deleted.

Warning
Ensure that there are no metal parts (e.g. metal plate for magnetic holders) on the back of your device. Metal heats up significantly in the field of an induction charger and can damage your device and/or the charger.

Note – Inductive charging

To be able to charge your device via the wireless charger, it must be compatible with induction charging technology. For more information, please refer to the operating instructions of your device.
Note that mobile phone cases, covers, etc., and other materials between the wireless charger and the back of your device may interfere with or even prevent the charging process.
To use the wireless charging function, an external USB-C power supply unit must be connected to the USB-C multi-port since otherwise the power supply will not be sufficient.
Place your smartphone centrally on the product. If it lies on a slight incline because of the camera, this will not impair the charging function.
Check the charging progress a short while after placing the smartphone on the product and reposition it if necessary.

Warning

Only use suitable charging devices or USB connections to charge the product.
Do not use defective chargers or USB ports and do not attempt to repair them.
Determine the maximum output current of the USB socket on your device. To do this, consult the operating instructions or contact the manufacturer.
Often, the values are 500 mA (USB-A 2.0), 900 mA (USB-A 3.0) or up to 3000 mA (USB-C).
Ensure that the total power consumption of all USB devices connected to the hub / multi-port adapter does not exceed the determined value.
The USB-A sockets on the multi-port adapter are intended for the transfer of data and are not suitable for charging smartphones or tablets.

Note

Run USB receivers (radio / 2.4 GHz wireless) if possible directly on the computer / notebook.
To use the charging function, the device must support Power Delivery (PD) or Thunderbolt 3/4.
To use the VGA or HDMI™ function, the device must support DisplayPort Alternate Mode or Thunderbolt 3/4.
VGA & HDMI™: for the simultaneous use of two monitors with identical contents (Full HD / 1080 p).
For optimized video function, we recommend passive monitor adapters/cables (without chipset / signal converter).

Commissioning and operation – Multi-port

Start up your computer and allow it to boot up all the way.
Connect the product to a spare USB port on your computer.
The product is recognized automatically. No driver installation is required.
Follow the instructions from your operating system if necessary.
Connect the devices to the product in sequence in order to use them.

Commissioning and operation – Inductive charging

Connect a suitable USB-C power supply unit to the USB-C PD input on the USB-C multi-port. When doing so, consult the operating instructions for the USB charger.
Lay your smartphone with its back on the inductive charger.
The charging process begins as soon as an effective induction field has been established. The current charge status is displayed on your smartphone.
If no induction connection can be established, change the position of your device if necessary.
The charging process ends automatically once your device’s battery is fully charged.

Warranty disclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.

Technical data

Multi-port

Operating voltage / Power
consumption| 5 – 20 V max. 5 A
---|---
Compatibility| USB-C connection
System requirement| Windows 11 / 10 / 8 / 7
Mac OS 10.8 ≥
USB specification| USB 3.2 Gen1

Wireless charging function

Input	5 V 2 A / 9 V 1.67 A
Output (under optimized conditions)	5 W / 10 W max.

Note

Disconnect the product, wait a few seconds and then reconnect the product if an error occurs or the product stops responding.

Declaration of Conformity

Hama GmbH & Co KG hereby declares that the radio equipment type [00200134] is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following Internet address: www.hama.com -> 00200134 -> Downloads.

Frequency band(s)	110.5 kHz – 205 kHz

Maximum radio-frequency power
transmitted| E-field 2.60 A/m – 15cm
H-field 0.187 A/m – 15cm

86652Monheim/Germany
Service & Support
www.hama.com
+49 9091 502-0

Lea MP Ricotta Carta
All listed brands are trademarks of the corresponding companies.
Errors and omissions excepted, and subject to technical changes.
Our general terms of delivery and payment are applied.
00200134/1122

Documents / Resources

| hama 200134 USB-C Multiport Qi Charging 12 Port [pdf] Instruction Manual
200134 USB-C Multiport Qi Charging 12 Port, 200134, USB-C Multiport Qi Charging 12 Port, USB-C Multiport, Qi Charging 12 Port, 12 Port, Qi Charger
---|---