hama 00 201661 Power Pack Instruction Manual
- June 3, 2024
- Hama
Table of Contents
00 201661
“LED10S”
Power Pack 10000 mAh
Operating Instructions
00 201661 Power Pack
Operating instruction
Controls and displays
- On/Off switch
- 2x USB-Aconnection
- Micro-USB connection
- LED capacity indicator
- USB-C connection
- Micro-USB charging cable
Thank you for choosing aHama product.
Take your time and read the following instructions and information
completely.Please keep these instructions in asafe place for futurereference.
If you sell the device, please pass these operating instructions on to the new
owner.
Explanation of warning symbols and notes
Warning
This symbol is used to indicate safety instructions or to draw your attention
to specifichazards and risks.
Note
This symbol is used to indicate additional information or important notes.
Package contents
- Power pack with LED capacity indicator,10000 mAh
- Micro-USB charging cable
- These operating instructions
Safety instructions
- Use the product only for the intended purpose.
- Protect the product from dirt, moistureand overheating and use it in dry environments only.
- Donot use the product in the immediate vicinity of heaters, other heat sources or in direct sunlight.
- Aswith all electrical products, this device should be kept out of the reach of children.
- Donot drop the product and do not expose it to any major shocks.
- Donot operate the product outside the power limits specified in the technical data.
- Donot open the device or continue to operate it if it becomes damaged.
- Dispose of packaging material immediately in accordance with the locally applicable regulations.
- The battery is permanently installed and cannot be removed; dispose of the product as awhole in accordance with the statutory regulations.
- Donot modify the product in any way.Doing so voids the warranty.
- Donot use the product in areas in which electronic products arenot permitted.
- Donot attempt to service or repair the product yourself.Leave any and all service work to qualified experts.
- Donot incinerate the battery or the product.
- Donot tamper with or damage/heat/disassemble the batteries/rechargeable batteries.
Operation
4.1. Charging the power pack
- Start the power pack charging process by connecting the enclosed Micro-USB charging cable to the Micro-USB input on the power pack (IN 5V/2A) and to asuitable USB charger.Alternatively, you can also charge the power pack via the USB-C input (IN 5V/2A). To do this, consult the operating instructions for the USB charger you areusing.
- The charging process begins and ends automatically.
- Fully charge the power pack once beforeusing it for the first time.
Note –capacity
- During the power pack charging process, the capacity is displayed constantly.
- The LED capacity indicator shows the current charge level in percent. The capacity indicator flashes during the charging process.
- When the capacity indicator shows aconstant 100%, the power pack is fully charged.
- Press the button on the power pack to switch this on and to determine the power pack’s current capacity.
- Toswitch the power pack off,press and hold the button until the LED indicator goes out.
Warning –rechargeable battery
- Only use suitable charging devices or USB ports to charge the product.
- Donot use defective chargers or USB ports and do not attempt to repair them.
- Donot overcharge the product or allow the battery to completely discharge.
- Donot store, charge or use the device in extreme temperatures.
- Charge regularly (at least quarterly) during periods of prolonged storage.
4.2. Charging devices
- Connect the enclosed Micro-USB charging cable to the USB port on the power pack (see 8. Technical Data) and to the Micro-USB port on your device (mobile phone, Smartphone, etc.).
- Incertain circumstances, the enclosed charging /connecting cable may not match the USB port on your device. In this case, use the USB cable that came with your device.
- The charging process begins automatically.During the charging process, the LED capacity indicator indicates the power pack’s remaining available capacity.
- The current battery charge status of your device is indicated on this.
- Terminate the charging process and switch the power pack off by pressing the button on the power pack twice in quick succession. The LED indicator goes out.
- Inthe event that no device is connected, the power pack switches itself off automatically.
Warning –Connection of devices
- Beforeconnecting adevice, check whether it can be adequately supplied with the power pack’s current delivery.
- Ensurethat the total current consumption of the connected device is not exceeded (see 8. Technical Data).
- Note the instructions in your device’s operating manual.
- You must obey the instructions and safety notes contained therein regarding the supply of power to your devices.
- The power pack must not be charged and discharged at the same time!
Note –optimised charging
- Optimised charging means that the power pack recognises the connected device, supplies it with the ideal current strength and thereforereduces the charging time to aminimum.
Warning
- Never connect the power pack’s charging cable to its input and output simultaneously.This can damage the battery.
- Donot connect any devices during the power pack charging process. Doing so can damage the power pack and connected devices.
Care and maintenance
Only clean this product with aslightly damp, lint-free cloth and do not use aggressive cleaning agents.
Warranty disclaimer
Hama GmbH &CoKGassumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failuretoobserve the operating instructions and/or safety notes.
Technical data
Micro-USB input | 5V ****2A |
---|---|
USB-C input | 5V ****2A |
USB-Aoutput 1 | 15V ****2.1 A |
USB-Aoutput 25 | 15V ****2.1 A |
Total output | 2.1 A(max.) |
Battery type | 3.7 V/Li-Po |
Min. capacity | 10000 mAh /37Wh |
Typ. capacity | 10250 mAh /37.92 Wh |
Usable capacity* | 5900 mAh @5V ****2.1 A |
*The usable capacity is the capacity that can be drawn from the output sockets, measured at 5V output voltage and adrawcurrent of 2.1 A.
Hama GmbH &CoKG
86652 Monheim /Germany
Service &Support
www.hama.com
+49 9091 502-0 Alllistedbrands are trademarksofthe correspondingcompanies.
Errors andomissions excepted,and subjecttotechnicalchanges.
Our general termsofdeliveryand paymentare applied.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>