Shenzhen Smart Eye Digital Electronics Y1 Outdoor Security Camera Installation Guide
- June 3, 2024
- Shenzhen Smart Eye Digital Electronics
Table of Contents
Y1 Quick
Installation Guide
Outdoor Security Camera
2K
Product Diagram
What’s in the Box
Indicator Lights Status
| Light Status | Camera Status |
|---|---|
| Red light on | Camera i s powered an |
| Red and blue light alternately flashing | Waiting to connect now |
| Blue light flashing | Connecting to Wi-Fi |
| Blue light solid | WiFi connection succeeds |
| Red light quickly flashing | 1. Reset camera to factory setting |
2. Camera is upgrading firmware
Warm note : Please make sure your router is connected te Internet .
User’s Guide
- Download and Install
Go to the App Store or Google Play to search and download the “Wansview Cloud” APP on your smartphone. Or scan below QR code to get the APP.
https://appstore.ajcloud.net/app/wansviewcloud
-
Register Account
Open the “Wansview Cloud” AP? and register an account with your email and a ctivate it.
Tips: Your password must be 8-16 characters, and contains at least the following three categories: numbers, uppercase letters , lowercase letters , or special characters. -
Add Y1 by “Wi-Fi connection by QR code”
Tips:
1. This outdoor security camera only works with 2.4GHz Wi-Fi, 5GHz Wi-Fi is
not supported!
2. Please put the camera near to the router during setting up the camera,
after connection succeeds, you can place the camera in another place.
Note: Put the camera close to the router (3 feet) during setting up the
camera.
- Add V1 by “Wi-Fi connection by Soft-AP”
FAQ
The camera can not connect to Wi-Fi?
– Please press the reset button on the camera for 5 seconds until the red
light flashes quickly and the camera says “reset is successful”, Please wait
for about one minute, then the camera will flash blue and red light
alternately and you can reconnect it now.
How to share the camera to another account?
– The invited member should download the Wansview Cloud app, and register a
new account first.
– The main account should open the Wansview cloud app, tap “Settings-invite
family members”—press —choose Country and then enter the invited member’s
account.
3. The invited member needs to open the Wansview cloud app and then click “Receive”. If he/she doesn’t receive the invitation, please close the app and then open it again.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:(1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance between 20cm the radiator your body.
Shenzhen Smart-eye Digital Electronics Co., Ltd
2F, Block 1, Shangrong Industrial Zone, No.2 Baolong Road
5, Longgang, Shenzhen, China
Product Name: IPCAM
Model: Y1(763)
https://www.galayou-store.com/y1
NB Warning: Manufacturer’s Name: Shenzhen Smart-eye Digital Electronics Co.,
Ltd Sample Description: Battery IP Camera Trade Mark: / Model number:
Y1(763),Y2(795), Q7(639), G3, R11, R12, 640, 641, 642, 764 Operating
Temperature: – 10° C to 50° C Wireless specification: 2.4G Wi-Fi: Max power
16.78dbm in frequency band 2412 – 2472MHz, Limit 20dBm. This product is a
fixed location. To comply with RF exposure requirements, a minimum separation
distance of 20cm must be maintained between the user’s body and the device,
including the antenna. Use only the supplied or an approved antenna. This
device in compliance with the essential requirements and other relevant
provisi ons of Directive 2014/53/EU. All essential radio test suites have been
carried out. The device complies with RF specifications when the device used
at 20cm from your body. This product can be used across EU member states. This
device was tested for typical fixed location operations. To comply with RF
exposure requirements, a minimum separation distance of 20cm must be
maintained between the user’s body and the IP camera, including the antenna.
This device in compliance with the essential requirements and other relevant
provisions of UK Radio Equipment Regulations (SI 2017/1206); UK Electrical
Equipment (Safety) Regulations (SI 2016/1101); and UK Electromagnetic
Compatibility Regulations (SI 2016/1091). All essential radio test suites have
been carried out.
Product Name: IPCAM
Model: Y1(763)
https://www.wansview.com/cn/proinfo.aspx?proid=48&categoryid=1&aids=2
Note: Both trademarks belong to the same manufacturer
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>