enbrighte 58088 LED Wi-Fi Flex Light Instruction Manual

enbrighte 58088 LED Wi-Fi Flex Light

Your Enbrighten LED Wi-Fi Flex Light transforms your space with vibrant colors and dynamic customization — all using the free Enbrighten Wi-Fi app.
Note: Read all instructions before installing. Please read all the warning statements included in these instructions.

MANUAL OPERATION

Press the button on the power supply to cycle through each of the following color settings:

1. White, 100% brightness
2. White, 50% brightness
3. White, 25% brightness
4. Color fade
5. Red
6. Green
7. Blue
8. Yellow
9. Purple
10. Pink
11. Orange
12. Teal
13. Holiday
14. July 4th
15. Rainbow
16. Twinkle
17. OFF

Suppliers’ Declaration of Conformity

Model #: 58085, 58087, 58088
Jasco Products Co., 10 E. Memorial Rd., Oklahoma City, OK 73114, www.byjasco.com This device complies with Part 15 of the FCC and Industry Canada license-exempt RSS standards. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications
to this equipment. Such modifications could void the user’s authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with an 8in minimum distance between the radiator & your body.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and
can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• Remotely operate your smart flex lights with the easy-to-use Enbrighten app. Follow the available instructions and resources to set up your smart device.
• NOTE: For best results, pair your lights near your router prior to installation. Requires 2.4GHz Wi-Fi connection

IMPORTANT

SAFETY INSTRUCTIONS

This portable luminaire has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an extension cord unless plug can be fully inserted. Do not alter the plug.
WARNING!
WARNING: When using outdoor use portable luminaires, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury, including the following:

• a) Use only three-wire outdoor extension cords that have three-prong grounding plugs and grounding receptacles that accept the appliance’s plug.
  b) Ground Fault Circuit Interrupter (GFCI) protection is to be provided on the circuit(s) or outlet(s) to be used for the wet location portable luminaire. Receptacles are available having built-in GFCI protection and are able to be used for this measure of safety.
  c) Use only with an extension cord for outdoor use, such as an extension cord of cord type SEW, SEOW, SEOOW, SOW, SOOW, STW, STOW, STOOW, SJEW, SJEOW, SJEOOW, SJW, SJOW, SJOOW, SJTW, SJTOW, or SJTOOW.

READ ALL INSTRUCTIONS

Refer to the manual or visit www.byjasco.com for limitations and restrictions on warranties and the product registration information.
WARNING: When using outdoors use portable luminaires, basic safety precautions should always be followed to reduce the risk of fire, electrical shock, and personal injury, including the following:
Ground fault circuit interrupter (GFCI) protection is to be provided on the circuit(s) or outlet(s) to be used for the wet location portable luminaire. Receptacles are available having built-in GFCI protection and are able to be used for this measure of safety. The maximum distance to the receptacle is determined by the length of cord provided.
WARNING: Keep these bags away from babies and children. Do not use in cribs, beds, carriages, or playpens. The thin film may cling to nose and mouth and prevent breathing.
WARRANTY INFORMATION: This Jasco product is warrantied for three years with a limited-lifetime replacement warranty on Enbrighten LED light source only.
WARNING!
To prevent failure, do not bend more than 4.72in.

WARNING: RISK OF ELECTRIC SHOCK

• OUTLETS USED FOR POWERING FLEX LIGHTS SHALL COMPLY WITH ALL NATIONAL AND LOCAL ELECTRICAL CODES. CONSULT LOCAL ELECTRICIAN IF UNSURE OF COMPLIANCE REQUIREMENTS.
• FOR USE ONLY ON GFCI PROTECTED CIRCUITS.
• DO NOT SUBMERGE.
• DO NOT USE AROUND AQUARIUMS.
• FLEX LIGHTS ARE A WET LOCATION PRODUCT AND HAVE NO SERVICEABLE PARTS.
• DO NOT USE WITH EXTENSION CORD NEAR WATER OR WHERE WATER MAY ACCUMULATE.
• KEEP LAMPS AT LEAST 16FT. FROM POOLS AND SPAS.
• KEEP PLUGS AND RECEPTACLES DRY.
• AVOID DAMAGE TO THE CORDS AND LAMP ASSEMBLIES DURING INSTALLATION. PERIODICALLY INSPECT THE FLEX LIGHTS FOR PHYSICAL DAMAGE OR OTHER DAMAGE CAUSED BY OUTDOOR EXPOSURE TO THE ELEMENTS.
• REPLACE ANY DAMAGED FLEX LIGHTS.
• DO NOT INSTALL IN LOCATIONS WHERE FLEX LIGHTS CAN BE STEPPED ON.
• ENSURE FLEX LIGHTS ARE UNPLUGGED FROM POWER DURING INSTALLATION.
• CHILDREN SHOULD NOT BE ALLOWED TO PLAY WITH FLEX LIGHTS.
• NOT SUITABLE FOR FIELD CUTTING OR SPLICING.
• UL RECOMMENDS TESTING GFCI CIRCUITS AND RECEPTACLES EVERY MONTH TO ENSURE PROPER OPERATION.
• DO NOT MOUNT OR SUPPORT FLEXIBLE LIGHT IN A MANNER THAT CAN DAMAGE THE OUTER JACKET OR CORD INSULATION.
•  MATERIAL MAY BECOME BRITTLE WHEN COLD. DO NOT INSTALL IT WHERE IT MAY BE STEPPED ON OR SUBJECT TO PHYSICAL DAMAGE.
• DO NOT USE WITH AN EXTENSION CORD NEAR WATER OR WHERE WATER MAY ACCUMULATE. FOR USE ONLY ON GFCI-PROTECTED CIRCUITS.

RISK OF FIRE

• NOT INTENDED FOR INSTALLATION IN CEILINGS, SOFFITS, CABINETS, ATTICS, OR OTHER ENCLOSED SPACES.
• DO NOT INSTALL NEAR-FLAMMABLE LIQUIDS.
• DO NOT COVER FLEXIBLE LIGHT AS THE COVERING MAY CAUSE THE FLEXIBLE LIGHT TO OVERHEAT AND MELT OR IGNITE.
• TO PREVENT OVERHEATING, DO NOT ALLOW CONTACT BETWEEN FLEXIBLE LIGHT CABLES OR PARTS OF THE FLEXIBLE LIGHT CABLE. MAINTAIN AT LEAST 12MM (0.47IN.) SPACING BETWEEN LIGHT CABLE OR LIGHT CABLE PARTS.
• UNCOIL FLEXIBLE LIGHT PRIOR TO PLUGGING IT IN.

SAVE THESE INSTRUCTIONS

• Electrical Ratings
• Input: 120V, 60Hz

INSTALLATION

This flexible LED strand can be planted in the ground with stakes, installed to surfaces with clips, or simply laid out in a line or around corners. Select a clean, sturdy location that is within reach of an outlet. The maximum distance to the receptacle is determined by the length of the cord provided.
Power supply
The power supply features a push button that serves both as a means of pairing with the app and manual operation. Mount it using the keyholes on the back or the tabs on the side.
IMPORTANT: Do not lay the power supply on the ground or where water may accumulate.

Ground mounting

1. Place the strand directly onto the ground or garden bedding.

Stake mounting

1. Insert the top of a stake into a clip’s keyhole slot, sliding it forward until it clicks into place.
2. Carefully thread the flex light through each clip.
3. Firmly plant the stakes into soil or garden bedding.

Note: If it requires more than a firm push, loosen the soil or remove debris.

Clip mounting

1. Mark the locations for each clip with a pencil, leaving about 1.5ft. of space between each.
2. Drill pilot holes on each marking using a 1/16in. drill bit.
3. Insert the included screws into the pilot holes with a Phillips-head screwdriver, leaving about 1/8in. of remaining space.
4. Place the clips over the screws —tighten the screws as needed.
5. Carefully thread the flex light through the installed clips.

Connect to power

After installing, plug the power cord into a 120VAC, 60Hz outlet.

Thank you for your purchase!

Instructions made easy

• Read instructions or watch easy-to-follow videos.

• Scan the code or visitbyjasco.com/58085i.

• Register your product

• Receive exclusive deals and register your product.

• Scan the code or visitbyjasco.com/deals.

• Home automation is in your palm with Wi-Fi smart devices and accessories at www.enbrightenwifi.com.

• Like our product?

• Leave a review on your favorite retailer’s website oramazon.com.

• Having problems?

• Let us know how we can help. Call 1-800-654-8483 between 7 AM-8 PM, M-F, Central Time.

• Todos los nombres de marcas son marcas comerciales de sus respectivos propietarios. App Store es una marca de servicio de Apple Inc. Google, Google Play y Google

• Home son marcas de Google LLC. Amazon, Alexa y todos los logotipos relacionados son marcas registradas de Amazon.com, Inc. o sus filiales.

• HECHO EN VIETNAM

• Distribuido por Jasco Products Company LLC, 10 E Memorial Rd., Oklahoma City, Oklahoma 73114. Este producto de Jasco tiene una garantía limitada de 3 años. Visite www.byjasco.com para conocer los detalles de la garantía. ¿Preguntas? Comuníquese al 1-800-654-8483 entre las 7AM y las 8PM hora estándar del centro

References

• amazon.com
• Enbrighten Wi-Fi Flex Lights manual (58085)
• Product Registration
• Jasco

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>