CELESTRON 120x Pocket Microscope User Manual

CELESTRON 120x Pocket Microscope

OVERVIEW

INSTALL THE BATTERY

1. Loosen the screw on the battery door with a screwdriver.
2. Slide the door open.
3. Install one AAA battery with correct polarity.
4. Re-attached battery door and tighten with the screwdriver.

USING YOUR MICROSCOPE

1. Place the specimen directly below the objective lens.
2. Press the LED on/off switch.
3. Adjust the Zoom knob to the desired level of magnification.
4. Rotate the Focus ring, while looking through the eyepiece, until the specimen is in focus.

SPECIFICATIONS

• Magnification: 60x to 120x
• Exit Pupil DIA: 10 mm to 14 mm
• Optical Zoom: to 2X
• Power: 1 AAA battery (not included)
• Illumination: LED (top)
• Size: 1.45” x 1.0” x 3.5” (37mm x 26mm x 88mm)
• Weight: 1.0 oz./30 grams

WARNINGS

1. To avoid possible permanent eye damage, never look at the sun or very bright objects through your Pocket Zoom Microscope
2. Remove the battery before storing the Pocket Zoom Microscope for an extended period of time
3. Use under adult supervision

© 2022 Celestron All rights reserved. celestron.com 2835 Columbia Street Torrance,
CA 90503 U.S.A. Telephone: 1(800) 421-9649 For ages 8 and up Ver: 1.0

References

• Celestron - Telescopes, Telescope Accessories, Outdoor and Scientific Products
• Technical Support | Celestron

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>