BISSELL 86T3 Big Green Deep Cleaning Machine User Guide

86T3 Big Green Deep Cleaning Machine
User Guide

Product Overview

7. Dirty Water Tank

Go online for a comprehensive walkthrough of your new purchase!
This guide has everything you need to get ready for first use, including setting up, using and maintaining your machine, but online you’ll find additional resources like tips and troubleshooting, videos, product registration, parts, and more.
Go to support.BISSELL.com.

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING YOUR APPLIANCE.
When using an electrical appliance, basic precautions should be observed, including the following:

WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:

• Connect to a properly grounded outlet only. See grounding instructions. Do not modify the 3-prong grounded plug.

• Do not leave appliance when it is plugged in. Unplug from outlet when not in use and before servicing.

• Use indoors only.

• Do not allow to be used as a toy. Close attention is necessary when used by or near children.

• Do not use for any purpose other than described in this user guide. Use only manufacturer’s recommended attachments.

• Do not use with damaged cord or plug. If appliance is not working as it should, or has been dropped, damaged, left outdoors, or dropped into water, have it repaired at  an authorized service center.

• Always install float before any wet pick-up operation.

• Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord.
  Keep cord away from heated surfaces.

• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

• Do not handle plug or appliance with wet hands.

• Turn OFF all controls before plugging or unplugging appliance.

• Do not put any object into openings. Do not use with any opening blocked; keep openings free of dust, lint, hair, and anything that may reduce air flow.

• Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts of the appliance and its accessories.

• Use extra care when cleaning on stairs.

• Do not use to pick up flammable or combustible materials (lighter fluid, gasoline, kerosene, etc.) or use in areas where they may be present.

• Do not use appliance in an enclosed space filled with vapors given off by oil-based paint, paint thinner, some moth-proofing substances, flammable dust, or other  explosive or toxic vapors.

• Do not use to pick up toxic material (chlorine bleach, ammonia, drain cleaner, etc.).

• Do not pick up anything that is burning or smoking, such as cigarettes, matches or hot ashes.

• Use only BISSELL® cleaning products intended for use with this appliance to prevent internal component damage. See the Cleaning Formula section of this guide.

• Unplug before connecting TurboBrush® Tool.

• Do not immerse. Use only on surfaces moistened by the cleaning process.

• Keep appliance on a level surface.

• Do not use without intake screen filter in place.

• Plastic film can be dangerous. To avoid danger of suffocation, keep away from children.

• Do not pick up hard or sharp objects such as glass, nails, screws, coins, etc.

• If your appliance has a motorized Brush Roll, do not leave machine running in the same spot without the handle fully upright.

• Do not use without filters in place.

• Liquid must not be directed towards equipment containing electrical components.

• Use only the type and amount of liquids specified under the operations section of this guide.

SAVE THESE INSTRUCTIONS
THIS MODEL IS FOR HOUSEHOLD USE ONLY. COMMERCIAL USE OF THIS MACHINE VOIDS THE MANUFACTURER’S WARRANTY.

WARNING
Improper connection of the equipment-grounding conductor can result in a risk of electrical shock. Check with a qualified electrician or service person if you aren’t sure if the  outlet is properly grounded. DO NOT MODIFY THE PLUG. If it will not fit the outlet, have a proper outlet installed by a qualified electrician.
This appliance is designed for use on a nominal 120-volt circuit, and has a grounding attachment plug that looks like the plug in the illustration. Make certain that the  appliance is connected to an outlet having the same configuration as the plug. No plug adapter should be used with this appliance.

GROUNDING INSTRUCTIONS
This appliance must be connected to a grounded wiring system. If it should malfunction or break down, grounding provides a safe path of least resistance for electrical current, reducing the risk of electrical shock. The cord for this appliance has an equipment-grounding conductor and a grounding plug. It must only be plugged into an outlet that is properly installed and grounded in accordance with all local codes and ordinances.

Warranty
5-Year limited warranty, may vary by state. Visit support.BISSELL.com or call 1-800-237-7691 for complete warranty information.

What’s in the Box?

Standard accessories may vary by model. To identify what should be included with your purchase, please refer to the “Carton Contents” list located on the carton top flap.

Cleaning Formulas
View our family of carpet cleaning formulas for your family of mess-makers at BISSELL.com.
Keep plenty of BISSELL formulas on hand so you can clean whenever it fits your schedule. Always use genuine BISSELL formulas in your machine. Other formulas may  harm the machine and void the warranty. Do not use Hard Floor Formula on area rugs or carpet.

Certain trademarks used under license from The Procter & Gamble Company or its affiliates.

Pretreat
Pretreat spots and stains to improve carpet cleaning performance.

WARNING To reduce the risk of fi re and electric shock due to internal component damage, use only BISSELL cleaning formula intended for use with this machine.

Filling the Clean Water Tank
For additional tips and tricks on filling your Clean Water Tank visit support.BISSELL.com.

Cleaning Your Carpet
We have additional tips for cleaning your carpet at support.BISSELL.com.

Carpet Cleaning Tips

• Before your first use, remove the cardboard cut out from the foot.
• Move furniture to another area if cleaning the entire room. (Optional)
• Vacuum area with a dry vacuum cleaner thoroughly before deep cleaning.
• Plan your cleaning route to leave an exit path. It is best to begin in the corner farthest from your exit.
• Pretreating is recommended to improve cleaning for heavily soiled carpet in high-traffic areas.
• Your machine has a circuit breaker that automatically shuts off the brush if a large or loose object gets caught in it. If that happens, unplug your machine, remove the  object and plug machine in to reset the circuit breaker.
• You may notice hair and debris deposits on the carpet or in the tank that were loosened while cleaning (especially with newer carpets that have never been deep cleaned  before). This debris should be picked up and thrown away.

WARNING To reduce the risk of injury, use extra care when cleaning on stairs. Keep machine on a level surface.
NOTICE Do not overwet. Take care not to run over loose objects or edges of area rugs. Stalling brush may result in premature belt failure. Some Berber carpets have a  tendency to fuzz with wear. Repeated strokes in the same area with an ordinary vacuum or deep cleaner may aggravate this condition.

Cleaning with Attachments

Upholstery Cleaning Tips
If using to clean upholstery, check upholstery tags.

• Check manufacturer’s tag before cleaning. “W” or “WS” on the tag means you can use your deep cleaning machine. If the tag is coded with an “X” or an “S” (with a  diagonal stripe through it) or says “Dry Clean Only”, do not proceed with any deep cleaning machine. Do not use on velvet or silk. If manufacturer’s tag is missing or not coded, check with your furniture dealer.
• Check for colorfastness in an inconspicuous place.
• If possible, check upholstery stuffing. Colored stuffing may bleed through fabric when wet.
• Vacuum thoroughly to pick up loose debris and pet hair. Use a vacuum with a brush attachment and a crevice tool to clean in fabric folds.

WARNING To reduce the risk of injury, use extra care when cleaning on stairs. Keep machine on a level surface.

Emptying the Dirty Water Tank
We have additional tips for maintaining your machine at support.BISSELL.com.

Cleaning the Hose and Tools

WARNING To reduce the risk of electric shock, turn Power Switch OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting  checks.

Maintaining the Brush Roll and Belt

WARNING To reduce the risk of electric shock, turn Power Switch OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting checks.

Removing & Replacing the Brush Roll

WARNING To reduce the risk of electric shock, turn Power Switch OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting checks.

Storing Your Machine
For more helpful maintenance tips, check out support.BISSELL.com.
Once your cleaning is complete, make sure both the Dirty and Clean Water Tanks are emptied, rinsed out and dried before the next use. Store cleaner in a protected, dry area.
Troubleshooting
Below are some of the issues you may run into. If you don’t see the issue you’re experiencing below, visit support.BISSELL.com.

with hot tap water.
Tank may not be seated completely.| Turn power OFF. Remove and reseat tank.
Pump may have lost prime.| Turn power OFF and then back ON. Wait one minute, then press trigger.
Debris filter on base is clogged.| Turn power OFF. Use hand to remove debris.
DirtLifter PowerBrush does not turn| The belt is off or broken.| Turn power OFF and unplug machine from outlet. Follow instructions on page 8.
The machine is in the upright position.| Brushes only rotate when machine is reclined using the recline handle.
Circuit breaker on machine may have tripped.| Turn the machine OFF and unplug from outlet. Check to see if foreign object is caught in Brush Roll. Remove object. Plug machine in to reset circuit breaker.
Cleaner not picking up solution| Tanks may not be seated properly.| Turn the machine OFF. Pick up both the Clean and Dirty Water Tanks and reseat them so they fit snuggly on the machine.
Clean Water Tank is empty.| Check fluid levels in Clean Water Tank and refill if necessary.
Dirty Water Tank has picked up the maximum amount.| Empty Dirty Water Tank.
Red float “door” in the tank may have closed as a result of bumping an object or moving machine back and forth too quickly.| Turn the machine OFF, allowing red float door to release into the open position. Turn the machine back ON to continue cleaning. Be sure your forward and backward strokes are completed at a slower pace.
Front nozzle of machine is clogged.| Turn the machine OFF. Use fingers to remove any debris from this area.
Upper body filter is clogged.| Turn the machine OFF. Use fingers to remove any debris from this area.

NOTICE To reduce the risk of a leaking condition, do not store unit where freezing may occur. Damage to internal components may result.
WARNING To reduce the risk of electric shock, turn power OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting checks.

We’re Waggin’ Our Tails!
BISSELL® proudly supports BISSELL Pet Foundation® and its mission to
help save homeless pets. When you buy a BISSELL product, you help
save pets, too. We’re proud to design products that help make pet
messes, odors and pet homelessness disappear.
Visit BISSELLsavespets.com to learn more.
But wait, there’s more!
Join us online for a complete guide to your new product, including
troubleshooting, product registration, parts, and more.
Go to support.BISSELL.com.©2020 BISSELL Inc. All rights reserved.
Part Number 1624684 04/20 RevF

References

• BISSELL® | Vacuum Cleaner, Carpet Cleaner, Steam Cleaner and Parts
• BISSELL® Pet Promise
• Support Home Page

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>