The ONE GC861601 Light Keyboard Piano User Guide
- June 6, 2024
- The ONE
Table of Contents
www.smartpiano.com
NO.2105010
User Guide
www.smartpiano.com
System Components & Parts List
Carefully remove components from the packaging and check that all listed parts are included:
Product Introduction
The ONE Piano
The ONE Piano is a smart instrument that can teach you to play. Combining
piano education with fun exercises and your favorite songs, The ONE is
suitable for both beginners and more experienced players. Its sound quality
resembles a grand piano and its functions are endless when connected with an
App for your mobile devices.or Bluetooth
Search “The ONE Smart Piano”
on App Store or Google Play
For more information, visit:
http://www.smartpiano.com/pages/sheet-music
Toolkit
Before assembling the piano, find the cross screwdriver from the toolkit. Check to make sure that all of the following parts are in the package. ( Note : The product can be quite heavy, so we recommend having two people when moving it.)
Assembly Instructions
- Place the left and right legs on both sides, then fix the pedals onto the legs as illustrated. Use A. 8 to tighten the pedals.
- Put on (double-check the direction of the cap before assembling). Plastic Screw Cap
Assembly Instructions
A.
- Place the left and right legs on both sides, then fix the pedals onto the legs as illustrated. Use 0 Self-tapping Head Screw to tighten the pedals.
- Put on Plastic Screw Cap . (double-check the Erection of the cap before assembling).
B. Use 0 Philip’s Head Screw to attach the backplate onto the left and right legs completed in step A. Use G Self-tapping Screw to attach the backplate onto the pedals completed in step A.
Assembly Instructions
1. Mount the main body onto what has been completed in step B. Align two 6
self tapping C.screws and two hand screws to 7 the screw holes, then
tighten the screws.
( Note : The product can be heavy at this step, so it’s best to have two
people when carrying it)
After assembling the overall piano frame, insert the holes at the bottom of
the main body and attach 1 Pedal line into by using the binding wire.
E. Place the piano in a static location in your room, then unscrew the screw nut for fixation until it presses against the floor. Do not unscrew the screw nut earlier, or it will scratch your floor.c
How to Use
Start-up
-
Make sure the power is off. Before you switch the instrument on, dial down the volume on the keyword as well as the volume of any connected audio equipment to a minimum level.
-
Connect the AC/DC power adapter to the power socket on the backside of the main body and plug the other side into the power outlet.
-
Switch on the piano. Lit LED lights indicate that the piano is turned on.
-
To turn off the product, press the “Power” button. To prevent accidental power-offs, the product can be turned off only when the button is pressed for a longer time.
Note : For safety reasons, unplug the instrument when not in use for extended periods of time, or during thunderstorms.
Connect
To Use the Stand The music stand sits on the top of the piano. You can flip up
the stand fold to place scores or tablet devices.
Connect with Smart devices Connect with Android devices by cable Note:
Bluetooth is also supported for Android device connection, but for using
friendly, we recommend you to use cable.
Connect with IOS devices via Bluetooth.
Note : Cables connections don’t support IOS devices.
1.Turn on smart| 2. Open the app| 3. Open Bluetooth Setting in-app| 4. Select “The ONE Plano PLAY”
Download the “The ONE Smart Piano app to access extended and additional
features
You can also play music from your iPad through The ONE piano You can use the
pinao as a form of high-quality speakers for your ‘Pad music
MIDI Function
When connected to a computer, this Instrument can be used as a MIDI keyboard.
When connected With tablets. USB MIDI bidirectional data transmission is
available. For example, you can record the music you play on this instrument
into your tablet. You can also use the instrument as speakers to play music
directly from your tablet devices
Functions
Master Volume Knob
After start-up, turn the volume knob to the right to increase the volume and
turn the volume knob to the left to decrease the volume. You can adjust in
both directions to change the volume.
Keyboard 88-key graded hammer action piano keyboard that supports a max of 128
key sounds at one time. As you play the piano, you’ll experience touch and
feel similar to that of a grand piano.
Using the Metronome
When you are practicing or recording your music, the metronome helps you to
learn rhythms. Use the metronome function to help you keep a steady tempo as
you play.
1. Press the “Metronome’s button to activate it. 2. Press the “Metronome”
again to turn it off. You can adjust the beat for different needs.The speed
ranges from 30 —280.
The beat goes higher when you turn the speed knob to the right, and it goes
lower when you turn the speed knob to the left.
Using the Pedals
This piano is equipped with soft, sostenuto, and sustain pedals.
Connecting Earphones
When practicing late at night. you can play the piano with your earphones as
illustrated.
Socket: If you plug into this socket. the sound will only come cut from the
earphones.
Note :
- Avoid using the machines for long periods of time at a high volume, since extended use can cause ear fatigue or even hearing damage.
- The size of the earphone sockets are 3.5mm and 6.5mm.
Extended Functions
Setting Up the Timbre There are 426 timbres for you to choose from your smart device.
Note :
- For specific tablet set-up instructions, refer to the App description in the App Store.
- This product’s default instrumental sound is that of a grand piano.
Recording Function
Simply tap the feature to start recording what you play and to share it on your social networks.
Auto Power-off
You can set auto power-off from your smart devices. Options: Power-off, 30
mins, 60 mins. Default value: 30 mins
Note :
When the product works independently, the default power-off setting is 30
mins. This module lists the main functions of the piano. For more details on
additional features, refer to the “Settings – piano settings” in The One App.
Specifications
Size| Length: 54 Inches Width: 18 Inches Height: 33 Inches Keyboard: 88-key
graded hammer action piano keyboard
---|---
Weight| 121 pounds
Supported devices| Bluetooth 4.0+ IOS 10.0+ Phone6/7/8/SE/X/11above iPad 5th
generation above,iPad mini 2 above,iPad Air above,iPad Pro above. Android
5.0+.support USB Host / OTG
Basic Parameters| Keyboard: 88-key graded hammer action piano keyboard Maximum
Polyphony: 64-note polyphony Tones: 426 timbres (only the timbre of a grand
piano is available for demo play) Audio Sampling rate: 32KHz Sampling Tones:
16-bit stereo Amplifier Power:30w Speaker Size: Tweeter 1.25-2 + woofer 6-2
Piano Lights: 88 sets of red and blue LED lights
Basic Functions| OnfOff: Power will be automatically turned oft if inactive
for 30 minutes. Volume: Adjust the volume of the sound. Metronome: Optional to
use. Turn the knob to adjust the tempo. Pedals: Three pedals. Soft. Sostenuto.
and Sustain respectively from left to right. Recording Function: Record music
while playing and share with your social network. Tone Selection: A variety
of timbres to choose from. (Functions with availability vanes with the mobile
device you’re using The ONE smart piano application on)
Interface| Power Source: 15V power cord connected to the back of the piano.
Cable Interface: The port is visible by pressing on and opening the small box
on top of the piano. The interface supports four specialized cables for The
ONE Smart Piano (USB Type —C) Headphone Jack: One 3.5mm. one 6.5mm headphone
jacks (front and rear) Connecting a headphone with the front headphone jack
(via a headphone jack adaptor) makes the sound audible only Through the
headphone. while connecting a headphone with the rear headphone jack makes the
sound audible through both the headphone and piano speakers. Aux In/Out: 6.5mm
auxiliary interface.
---|---
Accessories| Mounting screws Screwdriver USB Type —C Cable User Manual
Care Instructions| 1. Avoid direct sunlight. It will cause damage to the
piano.
2. Do not disassemble the piano. Disassembling may cause damages that are not
covered under the warranty.
Trouble-shooting
Problem
A noise is heard when turning on or off the piano.
Speakers do not work when playing
SPECIAL NOTICE
Warning
Functions of the product may be subject to strong electromagnetic
interference. If it happens. simply follow the user manual to restore the
initial settings. When the product stops working. store it in an unused
location.
Interference with other devices
Do not use the instrument in the vicinity of a TV. radio. stereo equipment.
mobile phone. or another electronic device Otherwise. the instrument may
generate noise.
Maintenance
When cleaning the instrument. use a soft and dry cloth. Do not use paint
thinners, solvents, cleaning fluids, or any chemical cleaning cloths.
Possible cause and solution
Its normal to hear some noise when turning the piano on or off. The noise may
be due to interference caused by the use of a mobile phone in proximity to the
instrument. Turn off the mobile phone. or place it far away from the
instrument
Check if the volume is too low or completely turned off. Then check if
anything is
the piano plugged into the earphone socket.
Caution
Do not press too hard on switches or controls. Avoid getting paper. metal or
other materials into the internal device. If this happens, unplug the device
immediately. Then ask for help from qualified service personnel to inspect the
equipment. Before moving the instrument. remove all connected cables. Before
using the product. please read the following instructions carefully. Please
keep This manual for inspection at any time in the future.
Power
Please make sure that the power adapter is connected to a power outlet with
the correct voltage. Do not use a power source with the wrong voltage. When
the device isn’t in use. or during a thunderstorm. disconnect the power
supply.
Connection
Before connecting the product to another device, first turn off the power on
both devices. This will effectively prevent equipment breakdowns or possible
damage to the other device.
Location
Do not place the product in the following environments in order to avoid
deformation, discoloration, or other serious damages. Do not expose the
instilment to excessive dust or vibrations, or extreme temperatures (such as
in direct sunlight or near a heater), or in a car to prevent panel
disfiguration or possible damage to the internal components. Do not place
vinyl, plastic or rubber objects on the instrument, since the panel or the
keyboard may get discolored.
CONTACT US
Email: support@smartpiano.com Facebook:
facebook.com/onesmartpiano
Changes or modifications not expressly approved by the party responsible for
compliance could void the user s authority to operate the equipment. This
device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cmbetween the radiator & your body. This transmitter
must not be co-located or operating in conjunction with any other antenna or
transmitter.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy, and if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>