The ONE TOD1 One Polaris Drum User Guide

The ONE TOD1 One Polaris Drum

Packing list

Dear user, after you receive this product, please check whether the following items are included:

Components

Product Introduction

TheONE Polaris Drum

TheONE Polaris Drum is an intelligent instrument that teaches people to play drums with a brand-new concept, breaking the traditional electronic drum learning style and interactive way. It is suitable for music lovers and beginners who want to learn drums. It can connect with mobile phones or tablet computer above Android 7.0 and IOS10.0 or above via Bluetooth or dedicated connection cable, together with THE ONE drum learning APP for more functions.

Have more fun in learning drums with THE ONE’s drum learning APP lnstaDrum
Please scan the QR code on the right to download and use the APP.

Parts Guide

Open the accessory box and remove the drum key when you are ready to assemble the smart drum.
Please confirm that the following described parts are in the box.

(Note: There are many spare parts. Each drum and cymbal has its own nameplate on the back, please confirm carefully according to the nameplate)

Packing list

Install the drum rack

1. Open the pre-installed drum rack, pull holders a and b at different angles to the left, and c to the right as shown in the illustration below.
2. Insert pill 2 into the sleeve pipe of holder a , and pillar 3 into that of holder c . Lock the screw with the drum key 32 .
   

Install the holders

1. Insert the cymbal holders 4 5, and 6 into the sleeve pipes and tighten the butterfly nut.
2. Insert L-shaped holders 20 21 22 and 23 into the sleeve pipe of the drum rack as shown and tighten the butterfly nuts.
   

Install the cymbals

1. Disassemble the nut and felt gasket at the upper end of cymbal holders 4, 5 and 6 as shown in the illustration below).
2. Put the “Hit-Hat” cymbal 7 into the cymbal holder 4 , successively cover the felt gasket, tighten the nut on the top, adjust the position of the cymbal, and tighten to position the butterfly nut.
3. Put the “Crash” cymbal 8 into the holder 5, successively cover the felt gasket, tighten the nut on the top, adjust the position of the cymbals, and tighten the butterfly nut.
4. Put the “Ride” cymbal 9 into the holder 6 successively cover the felt gasket, tighten the nut on the top, adjust the position of the cymbal, and tighten the butterfly nut.
   

Install the drum pads

1. Insert snare drum 10 into L-shaped holder 20 of holder b, adjust to proper position and lock the upper nut of the snare drum10.
2. Insert “Tom Drum 1” 11 into L-shaped holder 21 on the horizontal holder of the drum rack, adjust to the proper position and lock the upper nut of the snare drum 10.
3. Insert “Tom Drum 2” 12 into L-shaped holder 22 on the horizontal holder of the drum rack, adjust to the proper position and lock the upper nut of the snare drum 10.
4. Insert “Tom Drum 3” 13 into L-shaped holder 23 on the horizontal holder of the drum rack, adjust to proper position and lock the upper nut of the snare drum 10.
   

Note: The snare drum’s surface is in the mesh structure with great tension, which changes with the drum usage time. If the drum’s surface is loose and the tension of it is insufficient, the tension can be changed by adjusting the tuning screw.

Operate as follows:
Find the 32 drum key and slowly adjust each tuning screw in the sequence shown in the illustration below.
During adjustment, the tightness of each tuning screw shall be approximately the same
and tightened gradually to make the drum surface’s tension uniform.
Note: When adjusting the tuning nut, it shall not be tightened in place at one time, otherwise uneven tension of the drum surface will occur.

Install the drum module

1. Find the connection cable 19 and drum module 18 , and insert the plug of the connection cable into the connector of the drum module harness.
2. Take hand bolts 30 and 31, and tighten the 2 screws as indicated in the illustration below.
3. After tightening, insert drum module 18 into the sleeve pipe at the front end of the supporter a of drum frame, tighten it and to a fixed position.
   

Install the kick pad and pedal

1. Insert the beater 16 into the interface 15 of the kick pedal, see the illustration below, and then lock the screw with the drum key.
2. Pull the kick pedal 15 on the convex surface of kick pad 14 to make them just get stuck with each other.
3. Hook & loop fastener is provided at the bottom of the kick pedal. In order to prevent the kick pad from moving while using it, the kick pedal can be stuck to the carpet and the set screw of the kick pad can be locked. (see the illustration below)
4. Take out the hit-hat cymbal pedal 17 , and there is hook & loop fastener at the bottom of the hit-hat cymbal pedal, which you can stick the hit-hat cymbal pedal 17 to the carpet and fix the pedal position.
   

Connect the drum module

In order to conveniently connect the drum cable, each connection sleeve pipe of the connection cable plug is marked with the name of the corresponding drum module to be connected, and users can insert them into the drum pad and snare drum one by one according to the corresponding name of the connection cable.
Note: Except for snare drum, other drum pads and cymbalss have 1 plug each.
The snare drum has 2 plugs, 1 LED plug and 1 MIDI plug. Please carefully check the name of the jack on the back of the snare drum when inserting plugs (as shown in the illustration below).

User Guide

Drum module Function Panel

Powering On

1. Take out the power adapter and plug into the POWER INTERFACE of the jack panel on the left side of the drum module.
   Insert the other end into the socket.

2. Press the power switch of the drum module, and the drum set lights up and flashes.
   Note: This product has full-drum lighting and flashing effect during switching on and off;
   This product has no loudspeaker. After hitting, there is no sound when beating on the drum surface, which is normal. If you want to experience the sound of the product, please plug in the headphone.
   

Device Connection

• Connect headphones
  This product has no loudspeaker, headphones should be inserted when being used to hear the drum sound.
  Note: Using headphones at high volume for a long time will cause ear fatigue and hearing damage.
  The headphone jack of this product is the typical 3.5mm stereo headphone jack.
  

• Connect smart devices
  We are dedicated to creating a new type of intelligent instrument integrating networking, learning and entertainment, to make users play drums with great fun. When connecting to your mobile device via Bluetooth or a dedicated data cable, you’ll find more unexpected surprises.

• Data cable connection
  This products comes with a dedicated data cable.
  

• Bluetooth connection
  This product’s dual-mode Bluetooth can simultaneously connect to audio and MIDI signals.
  Operating procedures are as follows:

Bluetooth audio connection:

1. Turn on the phone Bluetooth

2. Search Bluetooth “The ONE DRUM Audio”

3. Connect Bluetooth

Bluetooth MIDI Connection:

1. Open lnstaDrum APP

2. Click Settings – Connect E-drums – Bluetooth MIDI
   

3. Select “The ONE DRUM MIDI” and connect

Bluetooth dual-mode signal transmission

This instrument can be connected to your smart device, and you can learn and play drums with music in the “lnstaDrum” APP wirelessly.
Note: When connecting your drum set to lnstaDrum through Bluetooth for the first time, you can go through the Bluetooth delay calibrating according to the APP prompt. This will improve your playing experience with lnstaDrum.

Dual transmission of USB MIDI and Audio data

Connect this instrument to the smart device, the music of the smart device and the sound of your beating on the drum are all transmitted from the headphones or the connected loudspeaker.

Connect audio equipment

The audio system or amplifier can be connected via the 6.35mm OUT PUT interface at the bottom of the drum module.
Note: Before connecting other devices, make sure that all devices are powered off. Also, when turning on the device, make sure that the volume of each device has been adjusted to a minimum.

Extended Functions

In addition to the built-in functions of the drum module, you can connect the product to the “lnstaDrum” APP for more extended functions.

• Choose rich playing sounds
  Connect to the “lnstaDrum” APP through Bluetooth Midi or data cable. In the APP, you can select 308 playing sounds (main sounds, auxiliary sounds, and effect sounds) and 8 sets of hit-hat sounds, which can well satisfy your performance needs.

• Drum Group Settings
  This product has the function of drum kit selection. Connect lnstaDrum APP and select drum set in the APP; It includes 25 preset drum kits and 9 GM drum kits.

• Drum kit sound control
  The volume of the drum pad can be adjusted in the APP and you can adjust a certain
  drum pad.

• Store user-defined drum kit sound
  The APP can store 5 sets of user-defined drum kit sounds.

• Initialization function
  This product is equipped with initialization function, and users can operate the drum
  module to restore factory settings in the APP.

• Automatic switch-on/off
  This product automatically powers off after 30 minutes of no operations by default;
  This function can be turned on/off and adjusted in the APP.

• Triggering Function Settings
  This product is equipped with trigger performance setting. The users can adjust the
  drum sensitivity parameter and velocity curve, and adjust the crosstalk value and
  anti-jamming value to prevent double sound and crosstalk .

• Lighting function
  This product’s lighting mode can be set in the APP, such as full-light hitting and lighting
  after hitting.
  Download “lnstaDrum” APP for to discover and experience more cool features.
  Details such as the connection version of APP and Smart Device can be consulted with Customer Service.

Product Specifications

iOS System 10.0 and above, and Android 7.0 and above, support USB Host/OTG

Support Bluetooth EDR/BLE5.1 device connection

LED| LED of 8 colors
Interface| DC Power Interface, 12V
1 Headphone interface, 3.5mm
1 AUX IN interface, 3.5mm
2 OUT PUT interfaces, 2*6.3mm
USB MIDI Interface
Drum Harness Interface
Bluetooth| Dual Bluetooth
Lighting Effect during Switching On/Off| The whole module is lightened with flash during switching on
The whole module’s light goes dim gradually during switching off
Data Cable| USB MIDI to TYPE-C Interface

• Warm Tips: In case of any change in specifications, the actual commodities shall prevail, and The ONE has the final interpretation right to the product.

Troubleshooting

no loudspeaker. You can plug in the headphone or external audio.
After powering on, the snare drum doesn’t light up.| Check whether the connection cable of the MIDI inter­ face and the LED interface of the snare drum is wrong.
After hitting the kick pad, other cymbals or drum pads sound simultaneously.| Check whether the kick pad is flattened against the drum rack, and whether the force of foot on the kick pod is strong. If the kick pod is flattened against the drum rack, the kick pad after being beaten will cause resonance and the shake of drum rack, which is easy to cause consequent noise.

FCC Caution

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC RF Radiation Exposure Statement:

1. This Transmitter must not be co-located or operating in coniunction with any other antenna or transmitter.
2. This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment.
3. This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However. there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

CONTACT US

Tel:833-970-26 70(US)
E-mail: Support@theonemusic.com
Web: www.theonemusic.com
Note: This product will be constantly updated and optimized. The manual may not be
synchronized with the product update in time. Please understand.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>