Godox TL60 Tube Light Instruction Manual

Godox TL60 Tube Light

Names of Parts

What’s in the Box

Optional Accessories

Two-light Bracket Ki1TL-B2, Four-light Bracket Kit TL-B4, Eight-light Bracket Kit

What’s in the Box
Power Supply
The built-in lithium battery can offer portable operation once got fully charged. The light can also be put into use by connecting the adapter to a power source.

Charge
The charge grids indicator will be blinking in charging while displaying full grids once got fully charged.TL-BB

Operation

Power Switch
Use the power switch to control the on or off of the RGB tube light. Then, the current information will be displayed on the LCD panel.

Mode Selection: Bi-color Mode/RGB Mode/Special Effects Mode
Press the MOD button to switch different modes:

Bi-color Mode
Color temperature adjustment: press the “+” or”-“button to adjust the color temperature from 2700K to 6500K.

Brightness adjustment: Short press the DIM button, then, press the”+” or”-” button to adjust the brightness from to 1 00.

RGB Mode
Adjust hue H: Short press the FN Button and H is selected. Then, press the “+” or button to adjust the hue from o to 360°.

Adjust saturation S: Short press the FN Button dial and Sis is selected. Then, press the “+” or “-“button to adjust the saturation from O to 100.

Special Effects Modes (39)
Press the”+” or “-“button to choose different special effects categories from l to 14. And the modes will display circularly by turning the selector dial.

After choosing the current mode, Short press the FN Button to choose from I, II, and III

Light Effects Table (39)

Control Modes Selection: Bluetooth/2.4G Wireless /DMX Control
Press the wireless button first, then, press the “+” or”-“button to choose the control mode. After choosing the mode, press the FN or wireless button to enter the relevant setting interface.

Bluetooth Setting
Bluetooth switch: Short press the FN button to select Bluetooth. Then, press the “+” or “-” button to switch it on or off. lf”ON” is displayed, the Bluetooth is on and “OFF” means off. When Bluetooth is on, the indicator will turn blue.

Initialize the Bluetooth password
Short press the FN button to select RESET. Then, press the “+” or “-” button to reset the Bluetooth.

Bluetooth Number
MAC: XXXX is the Bluetooth number of this light.

Wireless Setting
With a 2.4G wireless system, the RGB tube light has remote grouping and control functions. It is recommended to purchase RC-R9 remote control(optional) to achieve wireless control. Up to 6 groups of LED lights can be controlled. 32 channels and 99IDs are available with strong anti- interference capability.

Wireless switch
press the FN button to select ON/OFF. Then, press the “+” or “-“button to switch on or off 2.4G wireless. “ON” means 2.4G wireless is turned on(wireless indicator is lightened green), and “OFF” means turned off(wireless indicator is put off).

Chanel setting: press the FN button to select CH. Then, press the “+” or”-” button to select 32 channels from 7 to 32. Group setting: press the FN button to select GR. Then, press the “+” or”-” button to select 6 groups from A to F. ID setting: press the FN button to select ID. Then, press the “+” or “-“button to select 99 IDs from 7 to 99.

Note: When opening the Bluetooth and 2.4G simultaneously, the indicator will turn to cyan. Please make the light’s channel, group, and ID to the same as the remote control. The RGB tube light can only receive wireless signals in powered-on status.

DMX Control Modes

• Press the FN button to choose UF. then press”+” or”-” button to choose F(FDLLOW mode).
• Press the FN button to choose MOD. Then press the “+” or “-” button to choose ULTIMATE 8bit or CCT-HSI 8bit.
• After choosing MOD mode, press the FN button to choose ADD from 007 to 512, and the indicator will display blue.
• After set ADD, connect one end of the DMX cable to the DMX output port of the controller and the other end to the DMX input port of the light.

The data sent by the controller in ULTIMATE 8bit mode are as follows

Operating

Address Mode

| ULTIMATE 8bit
---|---
n| 0- 51(CCT)| 52-103(HSI| )104-156

(RGBW)

| 157- 208(FX)| 209-255(Filters)
n+1| 0- 255

0-100% DIM

adjustment

| 0-255

0-100%DIM

adjustment

| 0-255

0- 100%DIM

adjustment

| 0-255

0-100% DIM

adjustment

| 0-255

0-100% DIM

adjustment

n+2| 0- 255 CCT

selection

| 0- 255 HUE

selection

| 0-255 Red

ligh

| 0-18:RGB cycle 19-36:Flash

37-56:Disco

57-75:Lightning 76-95:Broken bulb 96-113:TV

114-133:Candle 134-151:Torch 152-170:Firework 171-189:Police car 190-208:Fire truck

209-228 Ambulance

229-247 Music 248-255SOS

| 0-127:R- GEL

128-255:L-GEL

n+3|  | 0-255

Saturation

setting

| 0-255

Green light

| 0-85 Light effectl 86-171:Light effectll 172-255

Light effectI11

| 0-255

(Lor R) Colored paper switch (Every 13 values re f er t o one

colored paper)

n+4|  |  | 0-255

Blue light

|  |
n+5|  |  | 0-255

White light

|  |

The data sent by the controller in CCT-HSI 8bit mode are as follows:

OMX value 255: only HSI)

n+3| 0″-360″ HUE adjustment
n+4| 0-100 Saturation adjustment
n+5|

DMX LEAD and FOLLOW mode

• Press the FN button to choose UF. then press”+” or”-” button to choose L(LEAD mode).
• Set other lights to FOLLOW modes.
• Connect the lights with an RJ45 cable.
• The lights in FOLLOW modes will automatically synchronize with the light in LEAD mode

Note: When using LEAD and FOLLOW modes through the DMX port, the number of lights in FOLLOW modes cannot be over 18.

Color Gel Setting

Press the color gel button to enter the interface. Then, press the “+” or”-” button to choose R-Gel or L-Gel group. Then, press the FN to enter the color gel group to select the corresponding color gel. There are 20 color gels in R-Gel and L-Gel groups for your choice, 40 kinds in total.

Connect with Smartphone APP

1. Set the Bluetooth to ON.
2. As there is a QR code on the light body of, please scan the QR code directly to download the “Godoxlight” smartphone APP(which can be used by Android and Apple systems). For more smartphone APP operations, please open the “help” in APP to gain detailed guidance.

Note: The first mobile device (mobile phone or tablet) can directly use the APP to control the light body. When replacing other mobile devices (mobile phones or tablets), the lamp body can be connected normally after Bluetooth reset. RGBW mode is available in the APP control of TL series tube lights.

Technical Data

Built-in Lithium

Battery

| l 4.4V/2600mAh

37.44Wh

| l 4.4V/5200mAh

74.88Wh

| l 4.4V/9000mAh/

l 29.6Wh

Adapter| 20V/2.4A| 20V/4.8A| 20V/5.5A
Power| Max.l 8W| Max.30W| Max.SSW
Duration(continuous output in 100% full

power)”

| 120 minutes| 150 minutes| 160 minutes
Channel| 32
Group| 6 (ABC DEF)
Color Temperature

Range

| 2700K ~ 6500K
Light Brightness

Range

| 0%~100%
RGB Color Gamut| 0 ~ 360°
CRI ( a)| 96
TLCI(“)| 98
Control Method| Smartphone APP/2.4G wireless/OMX control
Bluetooth Wireless

Control Distance

| 0 30m
2.4G Wireless Control Distance| 0 50m(with optional RC-R9

remote control)

Operation

Temperature

| -10~40 °C
Dimension| 48•750mm| 48•1170mm| 5H800mm
Net Weight| 0.73kg| 1.27kg| 1.27kg
BT Frequency

Range

| 2402.0-

2480.0MHz

| 2402.0-2480.0MHz| 2402.0-

2480.0MHz

Max. Transmitting

Power

| 5dbm| 5dbm| 5dbm
TL6 0

CCT| Illumination Unit| lm| 2m| 3m
2700K| lux| 285| 102| 46.7
fc| 35.7| 945| 4.34
3200K| lux| 384| 102| 46.8
fc| 35.6| 944| 4.35
4300K| lux| 408| 108| 49.8
fc| 379| 10.1| 4.63
5600K| lux| 421| 111| 50.8
fc| 39.1| 10.3| 4.72
6500K| lux| 447| 119| 54.6
fc| 41.5| 110| 5.07
TL120

CCCCTT| IIlllluummiinnaa ttiioonn UUnniitt| 1lmm| 22mm| 33mm
2800K| lux| 659| 202| 101
fc| 61.2| 18.8| 94
3200K| lux| 610| 187| 93.3
fc| 56.7| 174| 8.7
4300K| lux| 666| 205| 102
fc| 61 9| 19| 95
5600K| lux| 685| 210| 104
fc| 63.7| 19.5| 97
6500K| lux| 769| 234| 117
fc| 71.3| 21.7| 109
TL18 0

CCT| Illumination Unit| lm| 2m| 3m
2700K| lux| 776| 253| 114455
fc| 72.1| 23.5| 1133..55
3200K| lux| 672| 234| 112255
fc| 92.7| 21.8| 1111..66
4300K| lux| 687| 240| 112288
fc| 63.8| 22.3| 1111..99
5600K| lux| 729| 254| 113366
fc| 67.8| 23.6| 1122..66
6500K| lux| 895| 312| 116677
fc| 83.2| 29| 1155..55

Maintenance

This product, except for consumables e.g. adapter and adapter cable, is supported with a one-year warranty. Avoid sudden impacts and the product should be deducted regularly. Maintenance of the flash must be performed by our authorized maintenance department which can provide original accessories.
Unauthorized service will void the warranty. If the product had failures or was wetted, do not use it until it is repaired by professionals. Changes made to the specifications or designs may not be reflected in this manual.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• The device has been evaluated to meet general RF exposure requirements.
• The device can be used in portable exposure conditions without restriction.

Declaration of Conformity
GOOOX Photo Equipment Co.Ltd. hereby declares that This equipment is in compliance with the essential requirements and other relevant provisions of EU Directive 2014/53/EU. They are allowed to be used in all EU member states. For more information on DoC, Please click this web link:http://www.godox.com/DOC/Godox_ TL60_DOC.pdf.

Warranty

Dear customers, as this warranty card is an important certificate to apply for our maintenance service, please fill in the following form in coordination with the seller and safe keep it. Thank you

Seller Information

| Name
Contact Number
Address
Date of Sale
Note

Applicable Products

The document applies to the products listed on the Product Maintenance Information(see below for further information). Other products or accessories (e.g. promotional items, giveaways, and additional accessories attached, etc.) are not included in this warranty scope. ( Warranty Period ) The warranty period of products and accessories is implemented according to the relevant Product Maintenance Information. The warranty period is calculated from the day(purchase date) when the product is bought for the first time, And the purchase date is considered as the date registered on the warranty card when buying the product.

How to Get the Maintenance Service
If maintenance service is needed, you can directly contact the product distributor or authorized service institutions. You can also contact the Godox after-sale service call and we will offer you service. When applying for maintenance service, you should provide valid warranty card. If you cannot provide a valid warranty card, we may offer you maintenance service once confirmed that the product or accessory is involved in the maintenance scope, but that shall not be considered as our obligation.

Inapplicable Cases
The guarantee and service offered by this document are not applicable in the following cases: (j). The product or accessory has expired its warranty period;® . Breakage or damage caused by inappropriate usage, maintenance or preservation, such as improper packing, improper usage, improper plugging in/out external equipment, falling off or squeezing by an external force, contacting or exposing to the improper temperature, solvent, acid, base, flooding, and damp environments, etc;  Breakage or damage caused by the non- authorized institution or staff in the process of installation, maintenance, alteration, addition, and detachment; ® .

The original identifying information of the product or accessory is modified, alternated, or removed;  No valid warranty card;  Breakage or damage caused by using illegally authorized, nonstandard or non-public released software; (J) . Breakage or damage caused by force majeure or accident; . Breakage or damage that could not be attributed to the product itself. Once met these situations above, you should seek solutions from the related responsible parties and Godox assumes no responsibility. The damage caused by parts, accessories, and software that are beyond the warranty period or scope is not included in
our maintenance scope. The normal discoloration, abrasion and consumption are not breakages within the maintenance scope.

Maintenance and Service Support Information
The warranty period and service types of products are implemented according to the following Product Maintenance Information

Product Type| Name| Maintenance

Period(month)

| Warranty Service Type
---|---|---|---
Parts| Circuit Board| 12| Customer sends the

product to designated site

Battery| 3| Customer sends the product to designated site
Electrical parts e.g.battery charger| 12| Customer sends the product to designated site
Other Items| Flash tube, modeling lamp, lamp body, lamp cover, lockingdevice, package,power cord, sync cable, etc.| No| Without warranty

GODOX Photo Equipment Co . Ltd.
Add.:Building 2, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Baoan District, Shenzhen
51 Bl 03,China Tel:+86-755-29609320(8062) Fax:+86-755-25723423 E-mail:godox@godox.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>