Jabra Elite 3 Earbuds User Manual

: June 3, 2024
: Jabra

Jabra
Elite 3

User manual
GN Making Life Sound Better

Elite 3 Earbuds

© 2021 GN Audio A/S. All rights reserved. Jabra® is a trademark of GN Audio A/S. The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by GN Audio A/S is under license.

Made in China
MODEL: OTE150R/OTE150L/ CPB155

Declaration of Conformity can be found on www.jabra.com/doc

Welcome

Thank you for using the Jabra Elite 3. We hope you will enjoy it!

Jabra Elite 3 features

Powerful bass and customizable sound for life on the go.
4-mic technology for clearly better calls.
Sleek Danish design, with a premium finish.
Hear Through lets you hear what’s going on around you.
Up to 7 hours battery in the buds, and a total of 28 hours with the case.
Mono mode lets you use either earbud while the other charges.
Engineered for noise-isolation.
IP55-rated rainproof protection, plus 2-year warranty*.
Alexa** on tap. Tap to ask Alexa, plus one-touch Spotify playback***.
Against failure from dust and water with Jabra Sound+ app registration
** Alexa voice assistant and features only available for Android devices version 6.0 or higher
*** Instant Alexa activation and one-touch Spotify playback compatible with Android only

Jabra Elite 3 overview

Jabra Elite 3 earbuds

Charging case

Included accessories

Ear Gels

USB-C charging cable

How to wear

Carefully insert each earbud into your ear.
Position the microphones on the earbuds towards your mouth.

Changing Ear Gels

For the optimal audio experience, it is recommended to try each of the different Ear Gel sizes. The fit should feel light and comfortable in your ear. The medium Ear Gels are pre-mounted on the earbuds.

How to charge

The Jabra Elite 3 offers up to 7 hours of battery and up to 28 hours with the charging case and fast charge.

Charging the earbuds

Place the earbuds in the charging case and close the lid. It takes up to 2 hours to fully recharge the earbuds.
When the earbuds are removed from the charging case, the LEDs on the earbuds will light up red, yellow or green to indicate the battery status of the earbuds. The LED on the front of the charging case indicates the battery status of the charging case.

Fast charge the earbuds

Placing the earbuds in the charging case for 10 minutes when they are at low battery will fast charge the earbuds, offering up to 60 minutes of battery. Fast charging the earbuds requires that the charging case has a minimum of 30% battery.
You can see the current battery status of the earbuds using the Jabra Sound+ app.

Charging the charging case using USB

Plug the supplied USB-C charging cable into the charging case and a USB-A power supply or certified wall charger. It takes up to 3.5 hours to fully charge the earbuds and the charging case (depending on the charger used)

It is recommended to use a power supply with 5V +-0.25V and maximum charging current below 2A. It is not recommended to charge the earbuds or charging case using a power supply with a higher voltage.

What the LEDs mean

EARBUD STATUS

| High battery/Power on| | Power off
---|---|---|---
| Medium battery| | Pairing
| Low battery| | Resetting/ Firmware updating

BATTERY STATUS WHEN DOCKING/UNDOCKING EARBUDS

| High battery
---|---
| Medium battery
| Low battery
| Critically low battery (earbuds not charging)

CHARGING CASE STATUS WHEN CONNECTED WITH USB CABLE

| High battery
---|---
| Medium battery
| Low battery
| Fully charged

How to pair

Pairing with a mobile device

Power on the earbuds by removing them from the charging case. Alternatively, press the Left and Right buttons to power the earbuds on.
Press and hold (3 sec) the Left and Right buttons simultaneously until the earbud LED flashes blue. The earbuds will now be ready to pair to your phone.
Go to the Bluetooth settings on your smartphone and select the Jabra Elite 3 from the list of available devices to complete the pairing.

How to use

Power the earbuds off/on

Place the earbuds in the charging case to power off. Remove the earbuds from the charging case to power on.

To manually power off the earbuds, press both the Left and Right buttons simultaneously, or press and hold (5 sec) the Left or Right button when in Mono mode.
To manually power on the left or right earbud, press the Left or Right button.

Music controls

Left earbud	Function	Right earbud
Play/pause music	Press the Right button when not on a call
Volume up	Press and hold the Right button
Press and hold the Left button	Volume down
Next track	Double-press the Right button when listening to music
Restart track or previous track	Triple-press the Right button when

listening to music Repeat to skip to the previous track

Call controls

Left earbud	Function	Right earbud

Voice assistant controls

Left button| Voice Assistant|
---|---|---
| Activate Voice assistant (Siri, Google Assistant, Amazon Alexa*)| Double- press the Left button when not on a call

Alexa voice assistant and features only available for Android devices version 6.0 or higher

Hear Through

Hear Through lets you pay attention to your surroundings and engage in conversation, when not on a call, without needing to remove the earbuds. The microphones pick up surrounding sounds and transmit them to the speakers.

Left button| Hear Through|
---|---|---
| Hear through on/off| Press the Left button when not
on a call

One-touch Spotify playback

When configured using the Jabra Sound+ app, it is possible to control one- touch Spotify playback using the right earbud.
One-touch Spotify playback is off by default.

Right button| Spotify|
---|---|---
| Resume last played Spotify song| Double-press the
Right button when not listening to
music or on a call
Play Spotify recommended song| Double-press the Right button when Spotify is open

Sidetone

Sidetone enables you to hear your own voice when you are on a call. The benefit of Sidetone is that it enables you to determine how loud you are speaking.
Sidetone is on by default during calls and can be turned on/off using the Jabra Sound+ app.

Mono earbud use

The right or left earbud can be used individually for music playback or for calls. To activate mono earbud mode, place the unused earbud into the charging case.

Left button| Left earbud only|
---|---|---
| Play/pause music| Press the Left button when listening to music
Answer call| Press the Left button
End/Reject call| Double-press the Left button
Mute/unmute microphone| Press the Left button when on a call
Activate Voice assistant or one-touch Spotify playback| Double-press the Left button when not on a call
Adjust volume| Use the volume controls on the paired mobile device
Right button| Right earbud only|
---|---|---
| Play/pause music| Press the Right button when listening to
music
Answer call| Press the Right button
End/Reject call| Double-press the Right button
Mute/unmute microphone| Press the Right button when on a call
Next track| Double-press the Right button when
listening to music
Restart track or previous track| Triple-press the Right button when listening to music
Repeat to skip to the previous track
Adjust volume| Use the volume controls on the paired
mobile device

The left and right earbuds will automatically relink when both are placed in your ears.

Sleep mode

To conserve battery, the earbuds will automatically power off when they are out of range of your mobile device for 15 minutes and are not in the charging case, or when they have been inactive for 30 minutes.
To power the earbuds on, press the Left and Right buttons. Alternatively, place the earbuds in the charging case and then take them back out.
Sleep mode can be configured in the Jabra Sound+ app.

Multiple call handling

The earbuds can accept and handle multiple calls at the same time.

Multiple call handling

| End current call and answer incoming call| Press the Left or Right button
Reject incoming call, when on a call| Double-press the Left or Right
button

Update firmware

The Jabra Elite 3 can be updated to the latest firmware version using the Jabra Sound+ app.
If notifications are enabled in Jabra Sound+, you will receive an automatic notification when a firmware update is available. Follow the instuctions in the app to firmware update the earbuds.

Reset the earbuds

Resetting the earbuds clears the list of paired devices and resets all settings.

Place both earbuds in the charging case.
Press and hold (10 sec) the Left and Right buttons on the earbuds simultaneously until the LEDs on the earbuds flash purple.
When the LEDs stop flashing purple the earbuds have been reset.

The earbuds will need to be re-paired to your mobile device. Remember to delete/forget the pairing in the Bluetooth menu on your mobile device.

Jabra Sound+ app

Support

FAQ

View the FAQs on Jabra.com/help/elite3

How to care for your earbuds

Always store the earbuds in the charging case and safely protected.
To prevent the depletion of the battery lifetime or capacity, avoid storing the earbuds in hot or cold environments, such as a closed car in summer, or in winter conditions.
It is recommended to store the earbuds between -20°C and 45°C (-4°F and 113°F).
Do not store the earbuds for extended periods of time without recharging them (max. three months).
If the earbuds or the charging case become dirty, it is recommended to clean them with a soft, lint-free cloth that has been dampened with clean water.
It is recommended to use a power supply with 5V +-0.25V and maximum charging current below 2A. It is not recommended to charge the earbuds or charging case using a power supply with a higher voltage.