XCOAST IVE II Smartwatch User Manual

IVE II

USER
MANUAL

Stand: 12.9.2022

Read first:

Before using the Smartwatch IVE 2, please read this user manual carefully to ensure proper, safe & correct use. We recommend that you keep this document for future reference.

Our explanations are based on the default settings for the IVE 2.

• Some items may vary slightly depending on the region, service provider or smartphone software as well as your smartphone itself. In addition, we reserve the right to make changes without prior notice.
• Content that requires high CPU and RAM performance to process can affect the overall performance of the Smartwatch IVE 2.
• XLYNE assumes no liability for performance problems caused by incorrect use of the smartwatch or by providers.
• XLYNE is not liable for malfunctions, loss of performance or incompatibilities caused by changed registry settings or modified operating system software. Important! Unofficial operating system hacks and modifications may prevent the IVE 2 or some features from working as designed.
• Software, sound sources, wallpapers, images and other media on the IVE 2 are licensed for limited use. Extracting and using these materials for commercial or other purposes is a violation of copyright laws. The user bears all responsibility for any illegal use of media.
• Please note that depending on the provider tariff, there may be additional charges for mobile data services such as for example sending messages, uploading and downloading content, automatic synchronization or use of location services.
• Modifying the operating system of the IVE 2 may cause the IVE 2 to malfunction, corrupt or lose data. Actions such as hacking the operating system are violations of your license agreement with XLYNE and will void the warranty.

Notice symbols

| Note: Notes, usage tips or additional information
---|---
| Warning: Situations that could result in personal injury
| Caution: Situations that could result in damage to your equipment or other equipment

DUST PROTECTION & PROTECTION AGAINST WATER

The watch may be damaged if water or dust gets inside. Follow these tips to prevent damage to the device and to ensure the water and dust resistance of the smartwatch. Other liquids are not covered by these user instructions.

• The IVE 2 model is not suitable for use when submerged in water. We offer splash protection in the rain or when washing hands etc, which is why your IVE 2 should always be protected from water.
• Do not expose the Smartwatch to running water, such as water from a faucet, running water or sea / lake/ swimming pool waves.
• If the watch or your hand is damp, dry everything carefully before using the IVE 2 again.
• If the watch accidentally comes into contact with fresh water, dry it thoroughly with a clean cloth. Failure to dry the Smartwatch IVE 2 as described may damage the device.
• If the Smartwatch is dropped or subjected to a strong impact, the water and dust resistance may be compromised and the watch may be damaged.
• If the Smartwatch IVE 2 comes into intensive contact with liquids, water or the like, the watch may no longer function properly. Even if your accessory is splashproof, avoid exposing it to excessive dust, sand and mud unnecessarily, or using it in humid, extremely hot or cold environments.

All of the supplied accessories, such as the charging cable, are not dust & or waterproofed as individual components. Defects or damage caused by misuse or abuse of the included accessories are not covered by your warranty.

PROTECTION AGAINST OVERHEATING

To prevent the IVE 2 from malfunctioning, skin irritation, or damage due to battery leakage, do not expose the IVE 2 to excessively high or low temperatures.

If when wearing the watch it becomes uncomfortably hot, immediately remove the smartwatch from your arm and do not use it until it cools down.

First steps

INTRODUCTION

Using the Bluetooth® connection, the recommended “XCFIT”* app and your smartphone, you can synchronize the receipt of push notifications from your mobile device onto the IVE 2. You will be informed about the arrival of SMS messages, calls as well as messages from Facebook or WhatsApp etc.

The IVE 2 is connected via Bluetooth® to your internet-enabled phone or tablet with the operating systems Android™ (at least 4.4) and iOS (at least 8.0).

For best performance and functionality, use the IVE 2 with the wristband provided.

INCLUDED ITEMS

Make sure the product box contains the following items:

• IVE 2
• Charging cable
• Quick start Guide

The associated items are intended for use only with this model IVE 2 and must not be used with any other models or devices. We reserve the right to make changes in design and specifications without prior notification. The accessories included with the IVE 2 may vary by region.

Only use accessories approved by XLYNE. If you use non-approved accessories, it could result in performance degradation and malfunctioning that are not covered by the warranty.

The availability of all accessories is subject to change. For further information regarding accessory availability please contact XLYNE customer service.

*Note on app use and data processing: Your smartwatch can be connected to your smartphone using a variety of Android or iOS apps. Personal data (sensor data such as location data, etc.) might be used in the process. We are neither developers nor operators of these apps and therefore have neither influence nor access to the data processed. Before installing an app, please carefully read the data protection information of the respective operator stored in the app store.

LOADING

Before using your IVE 2 for the first time, you should fully charge the IVE 2 battery. Use the supplied charging cable for this.

• Place the end of the charging cable with the magnetic contacts on the smartwatch’s magnetic charging contact according to the fit.
• Connect the other end of the cable to a charging adapter or the USB port of a running computer.
• Ensure that the charger or computer is connected to a power supply/outlet. Attention! It may take up to 5 minutes for the PC/computer to recognize and start charging.

You can see your battery level on the IVE 2 watch screen.

The IVE 2 notifies you when the battery level is low. In this case, charge the watch again as soon as possible.

Battery usage information

• The operating time of the battery is correlated to your usage behavior and the condition of the battery.
• The battery is subject to wear and tear. Please note: running multiple applications or functions at the same time reduces battery life. The battery charge is also reduced in sleep mode – even if the device is not actively used.
• Over time, like all consumables, there may be a reduction in charge capacity.

TURNING THE WATCH ON AND OFF

To turn on the IVE 2:

Press and hold the side button until the IVE 2’s display lights up and the watch vibrates.

To turn off your IVE 2:

Press and hold the button on the side. After a few seconds you will be asked if you want to turn off the watch. Confirm this by pressing the green button on the screen.

Obey all warnings and instructions from authorized individuals in areas where wireless devices are prohibited. You should refrain from using it during take- off and landing in aircraft and from using it in certain clinical areas.

TURN THE SCREEN ON AND OFF

To wake up the screen, briefly press the smart button once.

The screen automatically dims after a few seconds of inactivity.

TECHNICAL SPECIFICATIONS

Basic usage

USING THE IVE2

Press the button once to turn on the display. You can control the on display with taps or swipe gestures.

When you are on the clock screen you can perform the following swipe gestures:

Swipe from top to bottom:

A quick menu is displayed. Here you can control the “Do not disturb mode”, determine the “Brightness”, “Switch off” the clock or go to the “Settings” of the clock.

Do Not Disturb Mode mutes all incoming notifications. In addition, the “Wake Up Gesture” is deactivated between 10:00 p.m. and 8:00 a.m. so that you are not disturbed while you sleep.

Swipe from bottom to top:

All clock functions are displayed. You can scroll in this function overview.

Swipe left or right:

Have your current health data displayed, such as step count, pulse, blood pressure, blood oxygen or sleep. You can also control your music, see the weather and your synced notifications from your smartphone.

XCFIT* (App)

In order for your IVE 2 to function properly, we recommend installing the latest version of the “XCFIT*” application on your smartphone. You can find the app in your respective app store or by scanning the following QR code with your smartphone.

You can also find the corresponding links on the XLYNE homepage under: LINK

Grant the XCFIT* app all permissions (e.g. location approval) in your smartphone settings and prevent the app from being closed in the background. For a stable Bluetooth connection, the location must be permanently activated.

ESTABLISH BLUETOOTH PAIRING

To be able to use the full range of functions of the app and the watch, make sure that your IVE 2 is switched on, Bluetooth® is activated on your device and the location service is switched on (for Android devices).

Now start the app and tap on “Device” or the clock symbol in the bottom bar. Now select “Add”. Then select your IVE2.

After successful pairing, you will see the IVE 2 image and the battery status of your watch:

Notes on Bluetooth® use

• If you want to connect your IVE 2 to another Bluetooth®-enabled device, hold the two devices close together to enable the best connection.
• There should be no people, buildings, walls, or other obstacles between your IVE 2 and the connected device.
• Note that the IVE 2 and the other cellular device are within 7m connection range. The working distance may differ depending on the environment.
• Only use trustworthy and properly secured devices for data transfer. If there are obstacles between the devices, the range may be reduced.
• Use of the Bluetooth® function for illegal purposes is prohibited: piracy, eavesdropping, etc. XLYNE accepts no responsibility for the consequences of illegal use of the Bluetooth® function.
• Bluetooth® uses the same frequency as some low power industrial or medical devices or machines. For this reason, interference may occur with some devices if a Bluetooth® connection is established in the vicinity of such products.
• XLYNE is not responsible for data loss of the data sent or received with the Bluetooth® function. For example through abusive data phishing.

Structure of the app

HOME PAGE:

On the home page of the app you can see the measured data of steps, sleep monitor, heart rate, blood oxygen and blood pressure. Tapping on the respective graph takes you to the detailed view of the respective function. More on this in the next section:

Detail views.

If you scroll down, you have the option to start a 4in1 measurement. To do this, tap on the detailed view “4in1 measurement”. If you tap on 4in1 measurement, the measurement starts. Keep your arm steady. Pulse, blood oxygen and blood pressure are measured to determine your degree of exhaustion.

DETAIL VIEWS:

There is a detail view for each of the pedometer, sleep monitor, heart rate monitor and blood pressure monitor features. Tapping on the respective graph takes you to the start page of the detailed view.

The history can also be seen in the detailed view by tapping on the arrow keys next to the date.

Pulse example                           Blood oxygen example

The collected data on your sleep is displayed under the “Sleep” detail view. There you can see, for example, when you fell asleep and woke up and how long you were in a deep sleep or had a light sleep.

The data will NOT appear immediately after you get up, giving you the opportunity to lie down again. It may take up to 30 minutes for sleep data to be synced and displayed.

AUTOMATIC PULSE AND BLOOD PRESSURE MEASUREMENT

Every 30 minutes, the watch creates an average value of the past pulse, blood oxygen and blood pressure measurements and enters this in the XCFIT* app. (Note, this must be activated in the settings). You can find these average values on the start page of the app. To get a current value of your heart rate, start a manual measurement on your watch.

The measurements taken are for personal use only and should not be used as a replacement for readings from medical devices or doctor’s advice.

TRAINING:

By pressing “Training” on the start page, you will be taken to various training sessions that you have done in the past with your IVE2.

To start a workout, select “Sport” in the function overview of the IVE2 and then select your desired sport. If your sport is not among the 20 sport modes, select “Other”.

Sport mode constantly measures your pulse, blood pressure and blood oxygen data. Because the sensors are always on, the IVE2’s battery life may decrease.

IDEAS:

You can access the settings by pressing “DEVICE” on the bottom bar of the start page.

Device:

Under the menu item “Notification” you can specify which app is allowed to send a message from your smartphone to your watch.

During initial setup, you may need to allow notification access.

Under the menu item “Reminder” you can set up a vibration alarm. At the desired time, the watch will vibrate gently. Here you will also find the drink and exercise reminder.

Under Movement reminder you can set a reminder that will alert you with a gentle vibration that you haven’t moved enough. To do this, specify the period in which you would like to receive reminders and the reminder intervals and how often this should happen.

Do Not Disturb Mode will let you silence notifications on the watch for specified periods of time. The wake-up gesture is also deactivated at night.

With “Pulse measurement” , “SpO2 measurement” and “Measure blood pressure” you can switch the automatic and permanent measurement of these values on and off. When the function is switched on, the respective value is measured at regular intervals.

Please note: These measurements are for personal use only. They are not medical values and do not replace a professional medical measuring device or a doctor’s advice!

With “Find device” you can make the IVE 2 vibrate if the device is within Bluetooth range.

The “Take photos” function opens the camera of the XCFIT* app and at the same time activates the camera icon on your IVE 2. Now press the smart button briefly to take a photo with your smartphone camera.

With “Temperature unit” , “Units” and “Time format” you can adjust whether the weather is displayed in Celsius or Fahrenheit, distances and other units are displayed in metric or imperial and the time is displayed in 12h or 24h format.

The “Backlight Duration” defines how long the screen should light up after being activated by the button or the wake-up gesture.

Note that the watch gives you the option to enable the Always On Display. However, the battery life is massively reduced, since the display is the largest energy consumer.

Under “More” you have the option to reset the clock or restart the IVE2.

This is useful if you find that your IVE 2 is responding more slowly than usual.

To unpair the IVE 2 from your smartphone, tap “Unpair”. You’ll find “Unpair” in the Devices screen at the top next to the IVE 2 image. Then check the Bluetooth settings on your smartphone (especially iPhone / Xiaomi) to see whether the IVE 2 has been removed from the list of paired Bluetooth devices. If this is not the case, disconnect the two devices here as well.

Under “watch faces” you have the option of selecting other watch face displays. Note that you can have a maximum of 6 watch faces on your IVE 2 at the same time. Therefore, before installing a new watch face, you would need to delete an old unused one.

You can also create your very own watch face. To do this, select a photo and arrange the desired items according to your ideas.

Under “Profile” you can enter your personal data. This is necessary for measurements to be more accurate.

You can also set your “goals” for number of steps or the amount of sleep you want to achieve.

Under “Third Party Application” you can connect the watch to Google Fit or Apple Health.

Note: If you rejected the Apple Health connection during the initial setup under iOS, you must activate the XCFit data settings via the Apple Health app. This cannot be done via the XCFit app.

*Note on app use and data processing: Your smartwatch can be connected to your smartphone using a variety of Android or iOS apps. Personal data (sensor data such as location data, etc.) can be processed in the process. We are neither developers nor operators of these apps and therefore have neither influence nor access to the data processed. Before installing an app, please carefully read the data protection information of the respective operator stored in the app store.

Attachment

SAFETY INSTRUCTIONS

Please read this section carefully and follow all instructions so that you can enjoy your IVE 2 for a long time.

Medical Notes

When selecting our materials, we carefully ensure that they comply with applicable regulations. Nevertheless, it can happen that some people have an allergic reaction to materials that come into contact with skin. Wearing the watch too tightly or loosely on the wrist can also lead to skin irritation or chafing. We recommend consulting a doctor if the skin under the watch is itchy, red or otherwise irritated. The magnetic charging cable of this smartwatch contains magnets. This product’s heart rate sensor and app are not medical devices and are intended for personal fitness only.

Dangers for children and people in need of help

This device can be used by children from the age of eight (8) years and by persons with limited physical, sensory or mental abilities or lack of experience and/or knowledge if they are supervised or have been instructed in the safe use of the device and the understand the resulting dangers. Children are not allowed to play with the clock.

Cleaning and user maintenance should not be made by children without supervision.

Choking hazard, contains small parts that can be swallowed.
Not suitable for children under 3 years.

Electromagnetic compatibility

Very strong magnetic fields can lead to deviations in the transmission, so these should be avoided. Failure to do so can result in malfunctions or damage to the IVE 2.

Battery pack

The battery is a very sensitive component, so the following instructions should be observed very carefully. The battery cannot be removed or replaced. You should also keep your IVE 2 away from heat sources. Environments with hot temperatures should also be avoided. The IVE 2 should never be broken open or burned. Please only use the supplied cable for charging and connect it to certified power sources. Charging should never be performed near heat sources, as overheating or fire may result. If you ignore these instructions, the service life of the battery may be severely limited and the IVE 2 may be damaged.

Water resistance

The following table provides information on the situations in which your IVE 2 can be used.

Regen
Spritzwasser

| Hände
waschen| Duschen| Baden,
Schwimmen
---|---|---|---
| | |

JA

| JA| NEIN|

NEIN

Operating temperature: -15°C to +50°C

REPAIR, WARRANTY AND DISPOSAL

Repairs

If an error or damage occurs on your smartwatch that is not explained in the descriptions of this user manual, please contact customer service.

Do not attempt to repair or modify the hardware or software yourself.

Do not force open the smartwatch.

If you act contrary to these instructions, the guarantee claim expires!

Warranty

XLYNE GmbH provides a 24-month guarantee for the IVE 2. The guarantee period begins on the date of sale (receipt, receipt, delivery note). Within the following 24 months, all defects based on material or functional errors will be repaired free of charge. Excluded is improper treatment such as falls, impacts or the like.

Disposal of packaging

It is generally recommended to keep the packaging of the smartwatch. When disposing of it, make sure that the packaging materials are separated by material type (cardboard and cardboard for waste paper, foil for the collection of recyclables).

Disposal of your Smartwatch

(Applicable within Europe in all countries with systems for the separate collection of recyclable materials).

This symbol indicates that according to the Waste Electrical and Electronic Equipment Directive (2012/19/EU) and your national laws, this product must not be disposed of with your household waste. This product must be handed over to a designated collection point. As an example, this can by returning it when buying a similar product or by handing it in at an authorized collection point for the recycling of electrical and electronic waste. Improper handling of waste equipment can have negative impacts on the environment and human health due to potentially hazardous substances that are often found in WEEE. By disposing of this product correctly, you also contribute to the effective use of natural resources. Information on collection points for old devices can be obtained from your city administration, the public waste disposal authority, an authorized body for the disposal of old electrical and electronic devices or your garbage disposal.

As a consumer, you are legally obliged to hand in all batteries and accumulators, regardless of whether they contain harmful substances or not, to a collection point in your community/district or to a retailer so that they can be disposed of in an environmentally friendly manner. Hand in the smartwatch completely (with the battery) and only in a discharged state at your collection point.

LEGAL NOTICE

IVE 2
PN: 570404, 570405, 570406, 570407
Copyright © 2022 XLYNE GmbH
This manual is protected by copyright laws.
This manual is published by XLYNE GmbH without any guarantee.
This manual may not be copied, reproduced, translated or transmitted in any other form by electronic or mechanical means, either in whole or in part, without the written permission of XLYNE GmbH. This includes storing, recording and photocopying.

All product and company names used in this document are trademarks or registered trademarks of their respective owners. All rights not expressly granted in this document are reserved. All other trademarks are the property of their respective owners.

EC Declaration of Conformity

We, XLYNE GmbH, Kettling 38, 58791 Werdohl, Germany declare that this product complies with the basic requirements and other relevant provisions of the directives RED 2014/53/EU, EMV 2014/30/EU and ROHS 2011/65/EU. A copy of the complete Declaration of Conformity can be found on our website www.xlyne.com.

SUPPORT
XLYNE GmbH
Ketting 38
58791 Werdohl
Germany

www.xlyne.com
Tel: +49 (0)2392 630400

Please send complaints and support requests to this address:

Support email address: service@xlyne.com

43 IVE 2

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>