ITC 69770-FF-KK Nova Scene Light Instruction Manual
- June 3, 2024
- ITC
Table of Contents
ITC 69770-FF-KK Nova Scene Light
PARTS/TOOLS NEEDED
IMPORTANT SAFETY INSTRUCTIONS.
READ CAREFULLY FOR YOUR PROTECTION AND SAVE ALL INSTRUCTIONS.
- Disconnect power before installing, adding or changing any component.
- To avoid a hazard to children, account for all parts and destroy all packing materials.
- It is recommended that fuse protection be added to the positive (+) input.
- Determine the installation location and drill hole for wires then align the light with gasket in the wire hole and use the light to mark screw holes. Drill appropriate sized holes for mounting screws.
- Follow the wiring diagram below to wire the light to your system.
- Feed the wires back through the hole and use application specific sealant in the specified circles areas both below and on top of the rubber. NOTE: Be sure the sealant does not block the heat sink channels.
- Press the light onto the rubber gasket then screw the light in place.
- Place the bezel on the light and push until it snaps into place.
For warranty information please visit www.itc-us.com/warranty-return- policy DOC #: 710-00147 • Rev A • 11/09/2022
3030 Corporate Grove Dr. Hudsonville, MI 49426 Phone: 616.396.1355 itc- us.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>