RYOBI RHV18 Cordless Hand Vacuum User Manual
- June 3, 2024
- RYOBI
Table of Contents
RHV18
User Manual
RHV18 Cordless Hand Vacuum
Important!
It is essential that you read the instructions in this manual before
assembling, maintaining and operating the product.
Subject to technical modification
Safety, performance, and dependability have been given top priority in the
design of your hand vac.
INTENDED USE
The hand vac is intended for dry vacuuming for household or similar non-
industrial applications.
Do not use the product for any other purpose. Use of the product for
operations different from intended could result in a hazardous situation.
WARNING! Do not use the product to vacuum liquids of any kind.
HAND VACUUM SAFETY WARNINGS
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
- The product is intended for household use only.
- Never vacuum materials such as hot coals, cigarette butts, matches, etc.
- Do not use the product without dust bowl or filter in place.
- Use extra care when using the product on stairs.
- Do not use the product to pick up hard objects such as nails, screws, coins, etc. Damage or injury could result.
- Remove battery when the product is not in use or when changing accessories.
- Rechargeable batteries are to be removed from the product before being charged.
- Exhausted batteries are to be removed from the product and safely disposed of.
- If the product is to be stored unused for a long period, the batteries should be removed.
- The supply terminals are not to be short-circuited.
ADDITIONAL BATTERY SAFETY WARNINGS
- To reduce the risk of fire, personal injury, and product damage due to a short circuit, never immerse your tool, battery pack or charger in fluid or allow a fluid to flow inside them. Corrosive or conductive fluids, such as seawater, certain industrial chemicals, and bleach or bleach-containing products, etc., can cause a short circuit.
TRANSPORTING LITHIUM BATTERIES
Transport the battery in accordance with local and national provisions and
regulations.
Follow all special requirements on packaging and labelling when transporting
batteries by a third party. Ensure that no batteries can come in contact with
other batteries or conductive materials while in transport by protecting
exposed connectors with insulating, non-conductive caps or tape. Do not
transport batteries that are cracked or leaking. Check with the forwarding
company for further advice.
KNOW YOUR PRODUCT
- Release button
- On/Off switch
- Handle, insulated gripping surface
- Battery port
- Dust bowl
- Filter holder
- Filter
- Operator’s manual
- Battery pack
- Charger
MAINTENANCE
- Use only original accessories and spare parts. Should components need to be replaced which have not been described, please contact an authorised service centre. All repairs should be performed by an authorised service centre.
- Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, carbon dust, etc.
- Do not at any time let brake fluids, gasoline, petroleumbased products, penetrating oils, etc., come in contact with plastic parts. Chemicals can damage, weaken or destroy plastic which may result in serious personal injury.
SYMBOLS
| Safety Alert
---|---
V
| Volts
| Direct current
| European Conformity Mark
| British Conformity Mark
| Ukraine Conformity Mark
| EurAsian Conformity Mark
****| Please read the instructions carefully before starting the machine.
Do not dispose of waste batteries, waste electrical and electronic equipment
as unsorted municipal waste.
Waste batteries and waste electrical and electronic equipment must be
collected separately.
Waste batteries, waste accumulators, and light sources have to be removed from
the equipment.
Check with your local authority or retailer for recycling advice and
collection point.
According to local regulations, retailers may have an obligation to take back
waste batteries and waste electrical and electronic equipment free of charge.
Your contribution to the reuse and recycling of waste batteries and waste
electrical and electronic equipment helps to reduce the demand of raw
materials.
Waste batteries, in particular containing lithium, and waste electrical and
electronic equipment contain valuable and recyclable materials, which can
adversely impact the environment and the human health if not disposed of in an
environmentally compatible manner.
Delete personal data from waste equipment, if any.
SYMBOLS IN THIS MANUAL
**** | Note |
---|---|
Parts or accessories sold separately |
|
---|---
|
Battery and charger
Compatible battery pack (not included)
Lithium-Ion | RB18.. |
---|---|
Compatible charger (not included) | BCL1418..H RC18.. |
Product specifications
Hand vac
Model | RHV18 |
---|---|
Voltage | 18 V |
Air flow volume | 1100 L/min |
Dust storage capacity | 600 ml |
Weight – excluding battery pack | 0.95 kg |
Weight According to EPTAProcedure 01/2014 | 1.38 kg(1.3Ah) – 2.15 kg(9.0Ah) |
Replacement parts | |
Filter | 5131045634 |
Hand vac floor care kit | 5132004612 |
RYOBI WARRANTY APPLICATION CONDITIONS
In addition to any statutory rights resulting from the purchase, this product is covered by a warranty as stated below.
-
The warranty period is 24 months for consumers and commences on the date the product was purchased. This date has to be documented by an invoice or other proof of purchase. The product is designed and dedicated to consumer and private use only. So there is no warranty provided in case of professional or commercial use. This warranty applies only on new products.
-
There is a possibility to extend for a part of the range of power tools (AC/DC) the warranty period over the period described above using the registration on the www.ryobitools.eu website. The eligibility of products for extended warranty is clearly displayed in stores and / or on packaging and is contained within the product documentation. The end user is required to register his/her newlyacquired products online within 30 days from the date of purchase. The end user may register for the extended warranty in his/her country of residence if listed on the online registration form where this option is valid. Furthermore, end users must give their consent to the storage of their personal data that is required to be entered online. They must also accept the terms and conditions. The registration confirmation receipt, which is sent out by e-mail, and the original invoice showing the date of purchase will serve as proof of the extended warranty.
-
The warranty covers all defects of the product during the warranty period due to faults in workmanship or material at the purchase date. The warranty is limited to repair and/or replacement and does not include any other obligations including but not limited to incidental or consequential damages. The warranty is not valid if the product has been misused, used contrary to the instruction manual, or has been incorrectly connected to a power supply. This warranty does not apply to:
– any damage to the product that is the result of improper or lack of maintenance
– any product that has been altered or modified
– any product where original identification (trade mark, serial number) markings have been defaced, altered or removed
– any damage caused by non-observance of the instruction manual
– any product not displaying the CE approval mark on the rating plate
– any product that has been attempted to be repaired by a non-authorised warranty service centre or without prior authorisation by Techtronic Industries
– any product connected to improper power supply (amps, voltage, frequency)
– any damage caused by external influences (water, chemical, physical, shocks) or foreign substances
– normal wear and tear spare parts
– inappropriate use, overloading of the tool
– use of non-approved accessories or parts
– Power tool accessories provided with the tool or purchased separately, including but not limited to screw driver bits, drill bits, abrasive discs, sand paper and blades, lateral guide, etc.
– Components (parts and accessories) subject to natural wear and tear, including but not limited to service & maintenance kits, carbon brushes, bearings, chuck, SDS drill bit attachment or reception, power cord, auxiliary handle, transport carry case, sanding plate, dust bag, dust exhaust tube, felt washers, impact wrench pins & springs, etc. -
For servicing, the product must be sent or presented to a RYOBI authorised service station listed for each country in the following list of service station addresses. In some countries your local RYOBI dealer undertakes to send the product to the RYOBI service organisation. When sending a product to a RYOBI service station, the product should be safely packed without any dangerous contents such as petrol, marked with sender’s address and accompanied by a short description of the fault.
-
A repair / replacement under this warranty is free of charge. It does not constitute an extension or a new start of the warranty period. Exchanged parts or products become our property. In some countries delivery charges or postage will have to be paid by the sender. Your statutory rights arising from the purchase of the product remain unaffected
-
This warranty is valid in the European Community, Switzerland, Iceland, Norway, Liechtenstein, Turkey, Russia, and the United Kingdom. Outside these areas, please contact your authorised RYOBI dealer to determine if another warranty applies.
AUTHORISED SERVICE CENTRE
Any request or issue with the product can be addressed to your local
authorised service centres (visit
www.ryobitools.eu ) or directly to: Techtronic
Industries GmbH, Max Eyth Straße 10, 71364 Winnenden, Germany. Please state
the serial number and product type printed on the label.
RYOBI is a trade mark of Ryobi Limited, and is used under license.
Techtronic Industries GmbH
Max-Eyth-Straße 10,
71364 Winnenden, Germany
Techtronic Industries (UK) Ltd
Parkway
Marlow, Bucks SL7 1YL
UK
961075715-02
Documents / Resources
|
RYOBI RHV18 Cordless Hand
Vacuum
[pdf] User Manual
RHV18 Cordless Hand Vacuum, RHV18, RHV18 Vacuum, Cordless Hand Vacuum, Hand
Vacuum, Cordless Vacuum, Vacuum
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>