velleman K2637 Super Mini 2.5W Audio Power Amplifier User Manual
- June 3, 2024
- Velleman
Table of Contents
velleman K2637 Super Mini 2.5W Audio Power Amplifier
Specifications
- Max. output power : 2.5W (4Ω /12V)
- Frequency response : 60Hz – 15KHz
- Input sensitivity : 20-150mV selectable þ Thermal and short circuit protection
- Power supply : 4.5 – 15VDC /400mA
- Quiescent current : 12mA
- Dimensions : 42x32mm (1.65”x1.25”)
modifications reserved
Applications
- mall but powerful multi-purpose amplifier
- For use with portable audio equipment
- Power amplifier for audio projects
- In-car use
- Your own unique application
COLOUR CODE
I| P| E| SF| S| DK| N| D| GB|
F| NL
---|---|---|---|---|---|---|---|---|---|---
C O D E
0
| CODICE COLORE| CODIGO DE CORES| CODIGO DE COL- ORES| VÄRI KOODI| FÄRG
SCHEMA
| FARVE KODE| FARGE KODE| FARB KODE| COLOUR
CODE
| CODIFI- CATION DES COU- LEURS| KLEUR KODE| C O D
E
Nero| Preto| Negro| Musta| Svart| Sort| Sort| Schwarz| Black| Noir| Zwart|
0
1| Marrone| Castanho| Marrón| Ruskea| Brun| Brun| Brun| Braun| Brown|
Brun| Bruin| 1
2| Rosso| Encarnado| Rojo| Punainen| Röd| Rød| Rød| Rot| Red| Rouge|
Rood| 2
3| Aranciato Laranja| Naranjado Oranssi| Orange| Orange| Orange| Orange|
Orange Orange Oranje 3
4| Giallo| Amarelo| Amarillo| Keltainen| Gul| Gul| Gul| Gelb| Yellow|
Jaune| Geel| 4
5| Verde| Verde| Verde| Vihreä| Grön| Grøn| Grønn| Grün| Green| Vert|
Groen| 5
6| Blu| Azul| Azul| Sininen| Blå| Blå| Blå| Blau| Blue| Blue| Blauw|
6
7| Viola| Violeta| Morado| Purppura| Lila| Violet| Violet| Violet|
Purple| Violet| Paars| 7
8| Grigio| Cinzento| Gris| Harmaa| Grå| Grå| Grå| Grau| Grey| Gris|
Grijs| 8
9| Bianco| Branco| Blanco| Valkoinen| Vit| Hvid| Hvidt| Weiss| White|
Blanc| Wit| 9
A| Argento| Prateado| Plata| Hopea| Silver| Sølv| Sølv| Silber| Silver|
Argent| Zilver| A
B| Oro| Dourado| Oro| Kulta| Guld| Guld| Guldl| Gold| Gold| Or| Goud|
B
Assembly
(Skipping this can lead to troubles ! )
Ok, so we have your attention. These hints will help you to make this project
successful. Read them carefully.
Make sure you have the right tools:
- A good quality soldering iron (25-40W) with a small tip.
- Wipe it often on a wet sponge or cloth, to keep it clean; then apply solder to the tip, to give it a wet look. This is called ‘thinning’ and will protect the tip, and enables you to make good connections. When sol-der rolls off the tip, it needs cleaning.
- Thin raisin-core solder. Do not use any flux or grease.
- A diagonal cutter to trim excess wires. To avoid injury when cutting excess leads, hold the lead so they can- not fly towards the eyes.
- Needle nose pliers, for bending leads, or to hold components in place.
- Small blade and phillips screwdrivers. A basic range is fine.
For some projects, a basic multi-meter is required, or might be handy
Assembly Hints
- Make sure the skill level matches your experience, to avoid disappointments.
- Follow the instructions carefully. Read and understand the entire step before you perform each operation.
- Perform the assembly in the correct order as stated in this manual
- Position all parts on the PCB (Printed Circuit Board) as shown on the drawings.
- Values on the circuit diagram are subject to changes.
- Values in this assembly guide are correct*
- Use the check-boxes to mark your progress.
- Please read the included information on safety and customer service
Typographical inaccuracies excluded. Always look for possible last minute manual updates, indicated as ‘NOTE’ on a separate leaflet.
Soldering Hints
- Mount the component against the PCB surface and carefully solder the leads
- Make sure the solder joints are cone-shaped and shiny
- Trim excess leads as close as possible to the solder joint
PART LIST
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>