HAVIT H630BT Wireless Headphone User Manual
- June 3, 2024
- havit
Table of Contents
HAVIT H630BT Wireless Headphone
Packing list:
Product structure
- Mode button
- Volume -/Previous
- Volume +/Next
- Power button
- AUX
- Paring indicator
- Charging indicator
- Charging port
Bluetooth headphone turn ON/OFF
- Turn on: Long press the power button for 3 seconds, the blue light of the paring indicator will be on for a few seconds.
- Turn off: Long Press the power button for 5 seconds.
Bluetooth connection
Follow the steps ( Please make sure that your phone is built-in Bluetooth function)
-
Turn on the headphone, the paring indicator flashes alternately with blue and red, the headphone enter the pairing status.
( Note: The headphone can automatically enter pairing status after power on if there is no re-connection. As the headphone can automatically reconnect with the last device that you had paired. To re-connect, you just need to turn it on.) -
Activate the Bluetooth function and search for HAVIT H630BT referring to your phone instructions.
-
Manually click “HAVIT H630BT” to connect.After the pairing is successful, the blue light of the pairing indicator is always on.
Answering incoming calls
Short press the power button to answer incoming calls.
Tip: Since some mobile phones default to answer calls via their own
receiver, please refer to the instructions of your phone and set on your
phone.
End the current call
Short press the power button to end the current call.
Mode Switching
Short press the mode button to switch mode(FM/TF card/AUX/Bluetooth)
Reject incoming cal ls
Press the power button for 2 seconds when there comes a cal.
Last number redial
Double press the Power button to redial the last calling number.
Voice assistant
Double click the mode button to activate the voice assistant.
Music playing
- Play/Pause: Short press the Power button;
- PREV: Long press – to select the previous song;
- NEXT: Long press+ to select the next song:
- VOL+: Short press + to increase volume;
- VOL Short press – to decrease volume.
Wired mode: Dual 3.5mm Audio Cable connecting To Audio Jack
- Plug and play: Connecting the headphone to a music player with the provided dual 3.5mm audio cable, the headphone can be used as wired headphone without starting.
- In this mode, you can’t use any function of the headphone, including pause playback, volume adjustment, microphone and so on.
TF card mode
Insert a TF card and dlick the mode button, the headphone will recognize
automatically to broadcast music.
To charge the headphone
- As product is built-in non-removable and rechargeable battery, please use the provided charging cable to charge.
- Fully charge the product before the first use. It takes 2-3 hours to charge for the subsequent use.
- The red light of the charging indicator is always on when charging, and the charging indicator turns blue when the battery is fully charged.
Notes
- a. Please choose the charger that is certified by the regular manufacturer.
b. The battery performance may decrease as repeating charging and using the product. It’s a normal phenomenon for all rechargeable batteries.
Specification
- Version: V5.3
- Battery: 500mAh
- Play time: 36Hours(VOL100%)-55Hours(VOL60%)
- Talk time: 35Hours
- Charging time: 2.5Hours
- TYPE C port
- Product size: 19618282mm
- Net weight: 225g
- Speaker D40mm
- Input voltage: 5V/0.5A
Warnings
- Please follow the instruction to operate
- Please charge the headphone with input power below 5V/0.5A, in order to protect the battery;
- Please store or use the headphone in a normal temperature environment.
- Please keep the headphone from heat source, such as radiators, hot air regulators, stoves, or other hea generating instruments. As it is not anti-high temperature.
- Don’t jam the ports of the headphone, such as charger port, LED port and microphone etc..
FCC Caution
- This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
- Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
- This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
- These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.