VigilLink VLEX-HT2150K-TR 18Gbps HDBaseT Extender with KVM 150m User Manual

VLEX-HT2150K-TR
18Gbps HDBaseT Extender with KVM 150m

User Manual
VER 1.0

VLEX-HT2150K-TR 18Gbps HDBaseT Extender with KVM 150m

Thank you for purchasing this product
Please read these instructions carefully for optimum performance and safety before connecting, operating, or adjusting this product. Please keep this manual for future reference.

A surge protection device is recommended.
This product contains sensitive electrical components that electrical spikes may damage, surges, electric shocks, lightning strikes, etc. The use of surge protection systems is highly recommended to protect and extend the life of your equipment.

Introduction

This 18Gbps HDBaseT Extender can extend the HDMI signal, bi-directional IR control signal, and USB KVM signal to a distance up to 150m via a single Cat6 cable. This product converts HDMI signal to standard HDBaseT signal and transmits it through a LAN cable. It can easily control the signal source devices or display devices from the remote end through a bi-directional IR signal pass-through function. Video resolution up to 4K2K@60Hz YUV 4:4:4. It also supports USB KVM and PoC functions.
The extender can be widely used in other fields such as video conference systems, multimedia signal broadcasting, HDMI signal extension, etc.

Features

• HDMI2.0b, HDCP 2.2, and USB 1.1 compliant

• Support 18Gbps video bandwidth

• Support video resolution up to 4K2K@60Hz YUV 4:4:4

• The transmission distance can be extended up to 492ft / 150m at the
  resolution of 1080P@60Hz, or 394ft / 120m at 4K2K@60Hz 4:4:4 via a single Cat6 cable

• Support bi-directional IR signal and USB KVM signal pass-through

• Support bi-directional PoC (Power over Cable) function

• Compact design for easy and flexible installation

Package Contents

1. 1 x 18Gbps HDBaseT Extender (Transmitter)
2. 1 x 18Gbps HDBaseT Extender (Receiver)
3. 1 x IR Blaster cable (1.5 meters)
4. 1 x IR Receiver cable (1.5 meters)
5. 1 x USB cable (1.5 meters)
6. 4 x Mounting Ears
7. 8 x Machine Screws (KM3*4)
8. 1 x 24V/1A Locking Power Supply
9. 1x User Manual

Specifications

Technical

8-bit (4K2K@60Hz YUV4:4:4)
8-bit, 10-bit, 12-bit (4K2K@30Hz)
HDR| HDR, HDR10, HDR10+, Dolby Vision, HLG
Audio Format| LPCM 7.1CH, Dolby True HD, and DTS-HD Master
ESD Protection| Human body model — ±8kV (Air-gap discharge) & ±4KV (Contact discharge)

Connection

Transmitter| Input: 1x HDMI IN [TypeA, 19-pin female] 1xIR IN [3.5mm Stereo Mini-jack] 1 xSERVICE [Micro-USB jack] 1 xUSB [USB-B, 4-pin female] Output: 1 xHDBT OUT [RJ45] 1 xIR OUT [3.5mm Stereo Mini-jack]
---|---
Receiver| Input: 1 xHDBT IN [RJ45 with light] 1 xIR IN [3.5mm Stereo Mini- jack] 1xSERVICE [Micro-USB jack] Output: 1 xHDMI OUT [TypeA, 19-pin female] 1 xIR OUT [3.5mm Stereo Mini-jack] 2xUSB [USB-A, 4-pin female]

Mechanical

Operation Controls and Functions

Transmitter Panel

COPY: Copy the EDID of the HDMI OUT port of the
Receiver. STD: Default 1080P 2CH
3| SERVICE| Firmware update port.
4| DC 24V| DC 24V/1A power input port.
Note that the extender supports the PoC function, which means that either Transmitter or Receiver is connected to a 24V/1A power supply; the other doesn’t need a power supply.
5| HDBT OUT| HDBT output port, connecting to the HDBT IN port of the
Receiver with Cat6 cable.
6| Link Signal Indicator (Green)| ▪ Illuminating: Transmitter and Receiver are in good connection status.
▪ Flashing: Transmitter and Receiver are in poor connection status.
▪ Dark: The transmitter and Receiver are not connected.
7| Data Signal Indicator
(Yellow)| ▪ Illuminating: HDMI signal with HDCP.
▪ Flashing: HDMI signal without HDCP.
▪ Dark: No HDMI signal.
8| HDMI IN| HDMI signal input port, connecting to HDMI source device such as DVD play or Set Top Box.
9| IR IN| Connecting to the IR receiver cable, the IR receive signal will emit to the IR OUT port of the Receiver.
10| IR OUT| Connect to IR blaster cable; the IR emit signal is from the IR
IN port of the Receiver.
11| PC| USB-B port, connecting to PC.

Receiver Panel

Note that the extender supports the PoC function, which means that either Transmitter or Receiver is connected to a 24V/1A power supply; the other doesn’t need a power supply.
4| HDBT IN| HDBT input port, connecting to the HDBT OUT port of
Transmitter with Cat6 cable.
5| Link SignalIndicator (Green)| ▪ Illuminating: Transmitter and Receiver are in good connection status.
▪ Flashing: Transmitter and Receiver are in poor connection status.
▪ Dark: The transmitter and Receiver are not connected.
6| Data Signal Indicator (Yellow)| ▪ Illuminate HDMI signal with HDCP.
▪ Flash: HDMI signal without HDCP.
▪ Dark: No HDMI signal.
7| HDMI OUT| HDMI signal output port, connecting to HDMI display devices such as TV or monitor.
8| IR IN| Connect to the IR receiver cable. The IR signal will send to the IR OUT port of the Transmitter.
9| IR OUT| Connect to the IR blaster cable; the IR signal is from the
IR IN port of the Transmitter.
10| USB ports| Two USB-A ports, connecting to keyboard and mouse, respectively.

IR Pin Definition

IR Receiver and Blaster pin’s definition is as below:

Note: When the angle between the IR receiver and the remote control is ± 45 °, the transmission distance is 0-5 meters;
When the angle between the IR receiver and the remote control is ± 90 °, the transmission distance is 0-8 meters.

Application Example

HDMI and HDMI High-Definition Multimedia interface and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>