ZEBRA MP7000 Grocery Scanner Scale Instruction Manual
- June 3, 2024
- ZEBRA
Table of Contents
ZEBRA MP7000 Grocery Scanner Scale
Overview
Zebra Camera SDK for Linux provides an application programming interface for UVC color camera.
Device Compatibility
- MP7000
Version History
Version 1.0.0-21 – 10/2020
- Bug fix – firmware update failed in camera after detaching while updating firmware.
Version 1.0.0-18 – 06/2020
- Initial release
Pre-requisites
- libjpeg
- libusb-1.0.x
- libuvc-0.0.6
- libwxgtk3.0 (To run the wxWidgets demo application)
- For development: c++11 supported g++
- libopencv 1.4.0 (Opencv version 1.4.0)
Components
The components are installed in the following folders:
Installation
- Install the packages listed in the prerequisites
- Install the Camera SDK Debian or RPM package. Debian is for Ubuntu 18.04, 64-bit, and the RPM is for x86 CentOS7, 64-bit.
- Run ldconfig
Installation will deploy libs, include files, configuration files and the demo application to the following locations:
Using Demo Application
- The demo application can be found in the /usr/share/zebra-camera/samples/ multi_client_zebra_camera_demo
- Connect the UVC Camera device (PID VID)
- Launch the “multi_client_zebra_camera_demo” application with root privileges.
- Use the controls to change the UVC standard control
- Sample application supports multiple devices
Known Issues and Limitations
- When scanning lengthy barcodes, only first 25 characters are provided to the application
- Parameter validation is not done by SDK during camera configuration
- Very fast scanning might cause missing decode image events from Camera SDK
ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corporation, registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners. ©2020 Zebra Technologies Corporation and/or its affiliates. All rights reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>