BELLA 14606 Electric Ceramic Titanium Griddle Instruction Manual

BELLA 14606 Electric Ceramic Titanium Griddle

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed, including the following:

• READ ALL INSTRUCTIONS.
• Do not touch hot surfaces. Use handles or knobs. Use oven mitts or potholders.
• To protect against electrical shock, do not immerse cord or plugs or temperature control probe in water or other liquid.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Close supervision is necessary when any appliance is used by or near children.
• Turn unit Off and unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance.
• Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair or adjustment.
• The use of accessory attachments not recommended by the appliance manufacturer may cause injuries.
• Do not use outdoors.

10. Do not let cord hang over the edge of table or counter, or touch hot surfaces.
11. Do not place on or near a hot gas or electric burner, or in a heated oven.
12. Extreme caution must be used when moving an appliance containing hot oil or other hot liquids.
13. Always attach temperature control probe to appliance first, then plug cord in the wall outlet. To disconnect, turn temperature control probe to OFF, then remove plug from wall outlet.
14. Do not use appliance for other than intended use. Use with wall receptacle only.

ADDITIONAL IMPORTANT SAFEGUARDS

CAUTION HOT SURFACES: This appliance generates heat and escaping steam during use. Proper precautions must be taken to prevent the risk of burns, fires or other injury to persons or damage to property.

CAUTION: This appliance is hot during operation and retains heat for some time after turning OFF. Always use oven mitts when handling hot materials and allow metal parts to cool before cleaning. Do not place anything on top of the appliance while it is operating or while it is hot.

• All users of this appliance must read and understand this Instruction Manual before operating or cleaning this appliance.
• The cord to this appliance should be plugged into a 120 V AC electrical outlet only.
• If this appliance begins to malfunction during use, turn unit Off and immediately unplug the cord. Then remove the temperature control probe. Do not use or attempt to repair the malfunctioning appliance.
• Do not leave this appliance unattended during use.

NOTES ON THE PLUG

This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug will fit in a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in any way.

NOTES ON THE CORD

The provided short power-supply cord (or detachable power-supply cord) should be used to reduce the risk resulting from becoming entangled in or tripping over a longer cord. Do not use an extension cord with this product. Always plug directly into a wall outlet/receptacle.

PLASTICIZER WARNING

CAUTION: To prevent Plasticizers from migrating to the finish of the counter top or table top or other furniture, place NON-PLASTIC coasters or place mats between the appliance and the finish of the counter top or table top. Failure to do so may cause the finish to darken; permanent blemishes may occur or stains   can appear.

ELECTRIC POWER

If the electrical circuit is overloaded with other appliances, your appliance may not operate properly. It should be operated on a separate electrical circuit from other appliances.

Getting to Know Your Griddle

Product may vary slightly from illustrations

Temperature Control Probe

• The temperature control probe is the nerve center and brain of the electric Griddle. Treat it carefully. Dropping or banging it could change its calibration and make the temperature settings inaccurate.
• Rotate the dial to select the temperature as called for in the recipe.
• The indicator light on the temperature control probe will illuminate as soon as the dial is rotated. The light will go out once the selected temperature has been reached.
• Allow the Griddle to cool before removing the temperature control probe.
• To clean the temperature control probe, simply wipe down with a soft, damp cloth. Make sure you dry it thoroughly before using again.

NOTE: The temperature control probe is not submersible.

CAUTION: Use the temperature control probe supplied with this Griddle only. The use of any other temperature control probe may cause fire, electric shock, or injury.

Before Using for the First Time

1. Carefully unpack the Griddle and remove all packaging materials.

2. Place the non-stick Griddle on a clean, flat working surface.
   NOTE: Some countertop and table surfaces, such as Corian® and other surfaces, are not designed to withstand the prolonged heat generated by this Griddle. We recommend placing a hot pad or trivet under the Griddle beforehand to avoid possible damage to the surface. Be sure the sides and back of the Griddle are at least 4 inches away from any walls, cabinets, or objects on the counter or table.

3. Before first use, see Hints For Care and Use of Non-Stick Surface and Care & Cleaning Instructions sections of this Instruction Manual.

4. Before cooking in the Griddle for the first time, wash the non-stick Griddle in mild dishwashing soap, wipe and allow to dry.
   NOTE: THE GRIDDLE IS NOT DISHWASHER SAFE.

5. Insert drip tray into rails under the Griddle’s side, positioned directly under the grease drain.

6. Turn the temperature control knob on probe to OFF position and attach securely in place.

7. Coat the non-stick surface with vegetable shortening before heating. If necessary, remove excess oil with paper towel.

Operating Instructions

1. Turn temperature control probe to the OFF position.

2. Plug the temperature control probe securely into Griddle’s control probe socket.

3. Plug cord into any standard 120 V AC wall outlet.
   IMPORTANT: ALWAYS PLUG CORD INTO GRIDDLE FIRST, THEN INTO WALL OUTLET.

4. Preheat Griddle for approximately 10 minutes before cooking. To preheat, turn the temperature control to desired temperature. The indicator light on the temperature control probe will illuminate as soon as the dial is rotated. The light will go out once the selected temperature has been reached.

5. Add food and cook according to the recipe. Adjust temperature control dial from 200ºF to 400ºF as necessary.
   NOTE: During cooking, the light will go on and off indicating that the Griddle is maintaining proper temperature.
   CAUTION: Griddle surfaces are hot during use.
   CAUTION: DO NOT USE COOKING SPRAYS. THEY CAN CAUSE A BUILD-UP ON THE COOKING PLATES AND MAY AFFECT THE NON-STICK PERFORMANCE OF THE PRODUCT.

6. When cooking bacon or foods containing large quantities of grease, it may be necessary to check the drip tray to make sure it is not full. Remove drip tray; empty contents and wash if needed.
   See the Time/Temperature Chart for basic suggested cooking information.

7. When cooking has been completed, turn the temperature control to the OFF position. The indicator light on the temperature control probe will turn off.

8. Unplug cord from wall outlet. Let the Griddle cool completely.

9. Remove temperature control probe from Griddle. Follow the Care & Cleaning Instructions described in this Instruction Manual.

Time/Temperature Chart

USDA Cooking Guidelines

NOTE: The United States Department of Agriculture recommends that meat and poultry be cooked to the following internal temperatures to be sure any harmful bacteria has been killed. Ground turkey and chicken should be cooked to an internal temperature of 165˚F / 74˚C and ground beef, veal, lamb and pork be cooked to an internal temperature 160˚F / 71˚C. Whole chicken and turkey should be cooked to an internal temperature of 180˚F / 82˚C; 170˚F / 77˚C for the breast. Goose and duck should be cooked to an internal temperature of 180˚F / 82˚C. Fresh beef, veal and lamb, etc., should be cooked to an internal temperature of at least 145˚F / 63˚C. Fresh pork should be cooked to an internal temperature of at least 160˚F / 71˚C. When re-heating meat and poultry products, they should also be cooked to an internal temperature of 165˚F / 74˚C.

User Maintenance Instructions

This appliance requires little maintenance. It contains no user serviceable parts. Do not try to repair it yourself. Any servicing requiring disassembly other than cleaning must be performed by a qualified appliance repair technician.

Care & Cleaning Instructions

CAUTION: Do not immerse the cord, plug or temperature control probe in water or any other liquid.

CAUTION: To avoid accidental burns, allow your Griddle to cool thoroughly before cleaning.

1. When cooking is completed, turn unit Off and unplug cord from wall outlet. Allow Griddle to cool.

2. Remove temperature control probe from Griddle.
   CAUTION: The probe may become hot after use. Allow to cool before handling.

3. If necessary, wipe temperature control case and probe with a damp, soft cloth. Dry temperature control probe completely. Set aside.
   CAUTION: The temperature control probe is not submersible.

4. Remove drip tray; empty contents. Wash Griddle and drip tray in soapy water; rinse and dry thoroughly.

5. To wash by hand, wash griddle plate with hot soapy water. Dry with towel.
   CAUTION: Probe and probe receptacle must be completely dry before use.

6. For stubborn food particles, loosen with a plastic cleaning pad. Avoid hard scouring of the non-stick finish as this may cause surface scratches. Do not use steel wool, scouring pads, or abrasive cleaners on any part of the Griddle.

Hints For Care and Use of Ceramic Non-Stick Surface

• To avoid scratching the non-stick surface, do not stack objects on the grill or griddle cooking plates. CAUTION: DO NOT USE COOKING SPRAYS. THEY CAN CAUSE A BUILD-UP ON THE COOKING PLATES AND MAY AFFECT THE NON-STICK PERFORMANCE OF THE PRODUCT.
• Use medium to low heat for best cooking results. Very high temperatures can cause discoloration and shorten the life span of any non-stick surface. If higher temperatures are necessary, preheat on medium heat for a few minutes.
• For best results and preserve the non-stick coating longer, use nylon, plastic, wooden or rubber utensils. Never cut food on the Griddle.
• Remove stubborn stains with a plastic scouring pad and mild dish washing liquid; DO NOT USE STEEL WOOL as it will damage the non-stick surface of the cooking plates.

Steps For Stain Removal and Proper Care of Your Ceramic Non-Stick Coating

1. Identify stained areas on the cooking surface and sprinkle some baking soda on the stains.

2. Moisten the baking soda to get a paste like texture by adding some water.

3. Let the paste stand for a few minutes on the stains (not more than an hour).

4. Rub with a soft damp cloth or lightly scrub with a plastic scouring pad, wipe clean and dry thoroughly.
   NOTE: Do not rub vigorously when using a plastic scouring pad and NEVER use a metal scouring pad as this may damage the non-stick coating.

5. Repeat the cycle once again if necessary. The performance and non-stick property of the ceramic non-stick coating will not be affected due to stains.

Limited TWO-YEAR Warranty

SENSIO Inc. hereby warrants that for a period of TWO YEARS from the date  of purchase, this product will be free from mechanical defects in material and workmanship, and for 90 days in respect to non-mechanical parts. At its sole discretion, SENSIO Inc. will either repair or replace the product found to be defective, or issue a refund on the product during the warranty period.

The warranty is only valid for the original retail purchaser from the date of initial retail purchase and is not transferable. Keep the original sales receipt, as proof of purchase is required to obtain warranty validation. Retail stores selling this product do not have the right to alter, modify, or in any way revise the terms and conditions of the warranty.

EXCLUSIONS

The warranty does not cover normal wear of parts or damage resulting from  any of the following: negligent use of the product, use of improper voltage or current, improper routine maintenance, use contrary to the operating instructions, disassembly, repair, or alteration by anyone other than qualified SENSIO Inc. personnel. Also, the warranty does not cover Acts of God such as fire, floods, hurricanes, or tornadoes.

SENSIO Inc. shall not be liable for any incidental or consequential damages caused by the breach of any express or implied warranty. Apart from the extent prohibited by applicable law, any implied warranty of merchantability or fitness for a particular purpose is limited in time to the duration of the warranty. Some states, provinces or jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, and therefore, the above exclusions or limitations may not apply to you. The warranty covers specific legal rights which may vary by state, province and/or jurisdiction.

HOW TO OBTAIN WARRANTY SERVICE

You must contact Customer Service at our toll-free number: 1-866-832-4843.

A Customer Service Representative will attempt to resolve warranty issues over the phone. If the Customer Service Representative is unable to resolve the problem, you will be provided with a case number and asked to return the product to SENSIO Inc. Attach a tag to the product that includes: your name, address, daytime contact telephone number, case number, and description of the problem. Also, include a copy of the original sales receipt. Carefully package the tagged product with the sales receipt, and send it (with shipping and insurance prepaid) to SENSIO Inc.’s address. SENSIO Inc. shall bear no responsibility or liability for the returned product while in transit to SENSIO Inc.’s Customer Service Center.

Frequently Asked Questions

Is there any ptfe or pfoa on the non-stick surface?****

The non-stick ceramic coating on the BELLA Ceramic Copper Titanium 12″ x 12″ Skillet is eight times more resistant and up to 30% faster than conventional non-stick coatings. Titanium has been added to the coating to increase its strength and resistance to metal utensils. This eco-friendly coating is free of PTFE and PFOA, lead, and cadmium.

Can food contain copper after being coated with “copper titanium”?****

This product contains no copper. It only has a coppery hue. You can look everywhere, but you won’t find anything indicating that the surfact or griddle contains copper. Whatever that implies, it’s a ceramic griddle that has been “Titanium strengthened.” Nowhere is it EVER indicated that the product actually contains copper (that’s a pretty ambiguous comment). “Copper” only appears in the product name and nowhere else. When this happens, Bella is aware that the client will ASSUME there is copper in the griddle when there isn’t any to be found.

Why is it advised against using spray oil?****

Sprays will make any non-stick pan, such as copper pans, teflon pans, green ceramic pans, etc., start sticking. Spray “chemicals” should not be used on anything because they are bad for you and the pans. They may start adhering when exposed to aerosol sprays.

How much cord is there?****

The 24″ power cord.

How evenly heated is the cooking surface, and does it separate for cleaning?****

The power cord detaches, allowing you to wash the grill component. So far, the surface has been heated quite uniformly. Since I’ve had it for two months, I’ve used it every morning. Great results.

What qualities should I check before purchasing an electric griddle?****

Pick equipment that is simple to clean. No holes should exist between the griddle plates so that grease cannot seep within the body. Look for one-piece castings or fully welded plates. The same justification justifies integrating splash guards.

Do you always clean the griddle?****

The griddle should be cleaned and oiled after each usage. This will assist prevent rust and maintain the non-stick coating.

Do you need to season a griddle before each use?****

After each usage, wipe down your griddle with a paper towel and hot water. Never clean your griddle with soap after you start using it because every use will add to the seasoning. Instead, gently scrape any food from the top using a spatula.

Do you need to season a griddle before each use?****

After each usage, wipe down your griddle with a paper towel and hot water. Never clean your griddle with soap after you start using it because every usage will add to the seasoning. Instead, gently scrape any food from the top using a spatula.

Is griddle with ceramic coating safe?****

Ceramic. Ceramic is fantastic since it is entirely inert, which means that dangerous poisons won’t leak from it. Heavy metals, polymers, coatings, and colors are typically absent from ceramic non-toxic cookware pans, and they are also dishwasher safe!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>