Da Fit 8.10 H236965x95mm Fitness Tracker Answer Make Calls User Guide
- May 15, 2024
- Da Fit
Table of Contents
Da Fit 8.10 H236965x95mm Fitness Tracker Answer Make Calls
Product Information
Specifications:
- Dimensions: 236.965x95mm
- Display Screen: Heart Rate, BP, SpO2 Sensing Area
- Power Button: Quick to Exercise Page Button
- Charging Contacts
Product Usage Instructions
Charging Your Watch:
Position the watch on the charging base so that the charging contacts on
the back of the watch align perfectly with the charging probe. Plug the
charging cable into a USB port on your computer or a power bank for charging.
It is recommended to use a power adapter with a 5V/1A output. After a short
period of charging, a charging indicator will flash. Allow the watch to fully
charge, typically taking about 2 hours.
Power On:
Long-press the right button to power on the watch.
Basic Operation:
- Swipe down: Control Centre
- Swipe up: Function list
- Swipe left: Message Notice
- Swipe right: Function pages
Connect the Watch with Da Fit App:
- Open the Da Fit App and enter your personal information.
- Click on ‘ADD A DEVICE’.
- Ensure that you allow the App to send you notifications.
Answer/Make Calls:
To adjust the volume, ensure that the call icon is illuminated and the watch
has successfully connected to Bluetooth on the phone. Swipe down to access the
control center page and confirm that the call icon is illuminated. Swipe left
to access the phone call page where you can find options for recent calls,
dial pad, and contacts. Click the volume icon to adjust volume during a call.
Voice Assistant:
Swipe right to access the function list page of the watch and click on AI
VOICE. Tap for voice input, such as making a call. This feature can only be
used when the call icon is illuminated and Bluetooth pairing is successful.
Sport Modes:
Press the rectangular button on the side of the watch to quickly enter the
exercise page. Scroll down to find the + icon to add preferred sports. You can
pause your workout by pressing the Pause button and finish by pressing the End
button.
FAQ
-
Q: How long does it take to fully charge the watch?
A: Typically, it takes about 2 hours for the watch to fully charge. -
Q: How can I adjust the volume during a call?
A: You can adjust the volume by clicking on the volume icon when making a call.
OVERVIEW
Watch Body
Download the “Da Fit” App to Connect Your Watch
- Scan the QR code below to download the “Da Fit” App
- Alternatively, you can download the “Da Fit” App from the App Store or Google Play.
Charging Your Watch
Position the watch on the charging base so that the charging contacts on the back of the watch align perfectly with the charging probe. Plug the charging cable into a USB port on your computer or a power bank for charging. We recommend using a power adapter with a 5V/1A output.
Note: After a short period of charging, a charging indicator will flash. Allow he watch to fully charge, which typically takes about 2 hours.
Power on:
- Long-press the right button to power on.
Basic operation
Connect the App
FUNCTION
Answer/make calls:
Ensure that the call icon is illuminated and the watch has successfully
connected to Bluetooth of phone. Swipe down to access the control center page
and confirm that the call icon is illuminated→ Swipe left to access the phone
call page→you can find options for recent calls, the dial pad, and your
contacts. Click the volume icon to adjust volume when calling
Note: If you are unable to make calls despite the illuminated call icon
and successful Bluetooth pairing, try turning off Bluetooth and then re-
pairing the device.
Voice Assistant:
Swipe right to access function list page of watch → click on “AI VOICE”
→Tap for voice input, such as making a call to Jack.
Note: This feature can only be used when the call icon is illuminated,
and Bluetooth pairing is successful.
120+ Sport Modes:
Simply press the rectangular button on the side of the watch to quickly
enter the exercise page→Scroll down to find the “+”icon→add the sports you
prefer.
Note: You can press the Pause button to pause your workout, and you can
also directly press the End button to finish the Workout mode.）
Full-Day Heart Rate Monitoring
-
To Measure Real-Time Heart Rate:
Swipe to the heart rate page of watch→On the screen, tap the heart symbol to initiate real-time heart rate measurement. (Wait for approximately 15-30 seconds to receive real-time heart rate data. This data will be recorded in the app.) -
To Set Auto Heart Rate Monitoring in App:
In the App, navigate to the settings by going to “Device”→click on”Other”→click on”full-day heart rate”→Adjust the interval time for automatic heart rate monitoring.
Note: You can also enable the heart rate alert and set the maximum heart rate in the App.
Blood Pressure Monitoring:
Swipe to the BP page of watch→Tap the BP symbol on the screen to initiate
real-time BP data measurement. (Wait for approximately 30 seconds to receive
the real-time data. The data will be recorded in the App.)
Note: For more accurate data, please ensure the sensor light is close to
your skin during monitoring.
Blood Oxygen Monitoring:
Swipe to the SpO2 page of watch→Tap the SpO2 symbol on the screen to begin
measuring your real-time SpO2 data. (Wait for around 15-30 seconds to get the
real-time data, which will be recorded in the App.)
Note: For greater accuracy, keep the sensor light close to your skin
during monitoring.
Sleep Monitoring:
Please ensure that the smartwatch is snugly worn on your wrist before use.
The smartwatch detects your sleep status based on wrist movements and body
motion.
Note: If you are sitting on the sofa watching TV or lying in bed reading,
reduced heart rate and immobility of the body may cause the watch to register
you as asleep.
Message &Call Notification:
In the App, navigate to “Device”→click on “Notification”→Enable notifications
for phone calls, messages, or other desired Apps.
Note:
- Ensure that you allow the watch to receive your phone’s notifications when connecting it to the App. Also, make sure the “Do Not Disturb” mode on both the phone and the watch is turned off, as it may affect notification functionality.
- Please ensure turn on Da Fit allow notification
Adjusting Volume:
Swipe to the music page→Tap the volume icon to adjust the volume
Waterproof:
The smartwatch has an IP67 waterproof rating, allowing you to wear it while
swimming. After swimming, click on “DRAIN WATER” on the watch.
How to find “DRAIN WATER” on the watch: Swipe to function list page on the
watch→click on “OTHERS”→”DRAIN WATER”
Note:
- Avoid impacts or dropping the device.
- Keep the device away from soap, shower gel, detergent, perfume, lotion, and oil as they can penetrate it.
- Do not use it while taking hot showers, in a spa, or other high-temperature or moisture-filled environments.
Unit Settings
In the App, navigate to “Device” →click on “Other” →click on “Unit
format”→Set the unit format to either metric or imperial.
Alarm Clock:
In the App, navigate to “Device” —click on “Other” —-“Alarms”–set your alarm.
Sedentary &Drink Water Reminder:
For the sedentary reminder: Go to App—“Device”–“Other”–“Reminders to
Move”–turn it on.
For the drink water reminder: Go to App—“Device” –“Other”–“Drink water
reminder”–turn it on while seting the starting time, frequency, and interval
for reminders. Turn Wrist Detection (Quick View): go to
App—“Device”–“Other”—“Quick View”—turn it on and setting its valid period.
Note: the feature of wrist detection will apply in the setting time.
Female Physiological Cycle Reminder:
go to App—“Device”–“Other”—“Physiological cycle reminder”—turn it on and set
cycle, menstrual days, last menstrual start date, reminder mode, reminder
time, physiological cycle calendar.
Find Phone:
When your smartwatch and the App are connected, use the “find phone“ feature by
sliding to the function list page of watch→”Find”→click the “find phone” option
on the watch→Your smartwatch will ring to help you locate it.
Take photo:
Allow the App to take pictures and record videos first. Photos will be saved in
your phone’s album/gallery. go to App—“Device”—click on “Shutter”—shake your
wrist to take a photo.
Goal Setting:
In the App, navigate to “Me” —Me—Set up goal for step, sleep, BP, HR and so
on per day.
Music Control:
Swipe left on the watch face to access the music page. Tap the screen to play
or pause music and switch songs after successfully connecting to your device.
Screen Brightness &Auto Lock Time:
Adjust screen brightness by accessing the function list page of
watch—“OTHERS”—“BRIGHTNESS”—Slide to set up.
Set the auto-lock time by going to the app—“Device” —“other”—“Auto
lock”—configuring the auto-lock duration in seconds.
Language:
Language will sync with your phone after a successful pairing. The smartwatch
supports 13 languages. You can also change the language in the App by
navigating to “Device”—“other”—“Language”—selecting your preferred language.
Weather:
Weather information updates automatically every hour. Access it in the App by
going to “Device”—“other” —“Weather”—setting the temperature format or
location.
Data Recording Time
When the smartwatch and App stay continuously connected, data for steps,
calories, heart rate, blood pressure, and blood oxygen will be recorded for 30
days in the App. On the watch, it will be recorded for 3 days without
connecting to the App.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>