defender CH-226 Car Holder Instruction Manual

CH=-226
Operation manual

Install the holder onto the headrest

Compress the base of the holder to fit between the headrest stands

Place the holder base between the stands and release the holder clamps

www.defender-global.com

Installing the mobile device into the holder

Open the holder side clips to fit the size of your mobile device

Install the mobile device and close the side clips 

The holder horizontal use

1. Rod length is 200 mm
2. The distance between the headrest and the mobile device is 50 — 220 mm (full length of the rod)
3. You can turn the rod 180° horizontally

CAR HOLDER OPERATION MANUAL

Terms and conditions of safe and efficient use of the product Usage precautions:

1. Use the product for its intended purpose only.

2. Do not disassemble. This product does not contain parts that are entitled to a self-sufficient repair. On the question of maintenance and replacement of a failed item apply to a dealer or Defender authorized service center.
   While receiving the product make sure that it is unbroken and there are no freely moving objects inside the product.

3. Keep away from children under the age of 3. May contain small parts.

4. Keep away from humidity. Never immerse the product in liquids.

5. Keep away from vibrations and mechanical stresses, which can cause mechanical damage of the product.
   In case of mechanical damage, no warranties are provided.

6. Do not use in the presence of visual damage. Do not use when the product is obviously defective.

7. Do not use the product at temperatures below and above recommended temperatures (-20°C – +50°C), under the conditions of humidity evaporation, as well as in a hostile environment.

8.  Do not put it into the mouth.

9. Do not use the product for industrial, medical or manufacturing purposes.

10. In case when shipment of the product was conducted in subzero temperatures, then before operating, the product should be kept in a warm placement (+16-25°C or 60- 77°F) within 3 hours.

11. Do not use the device while driving the vehicle, if it is diverted attention, and in other cases when the law obliges you to turn off the device.
    Features « Foldable construction + Easy to adjust the position of the device horizontally Specification + Adjustable distance between clamps: 120-200 mm « Minimum  distance between the head restraint stands: 105 mm Maximum allowable distance between the head restraint stands: 145 mm Rod length: 200 mm » Rotation: 360 °   Mounting: on the head restraint + Material: plastic Color: black
    IMPORTER: Defender Technology OU, Betooni str 11, 11415, Tallinn, Estonia.
    Manufacturer: China Electronics Shenzhen Company. Address: 35/F, Block A, Electronics Science & Technology
    Building, Shennan Zhonglu, Shenzhen, China. Made in China.
    Unlimited shelf life. Service life is 2 years. Date of manufacture: see on the package.
    The manufacturer keeps the right to change package contents and specifications indicated in this manual. The latest and detailed operation manual is available at www.defender-global.com

Made in China.

Documents / Resources

| defender CH-226 Car Holder [pdf] Instruction Manual
CH-226, Car Holder, CH-226 Car Holder, Holder
---|---
| defender CH-226 Car Holder [pdf] Instruction Manual
CH-226 Car Holder, CH-226, Car Holder, Holder

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>