hama 201630 51W, 1x USB-A Quick Charge User Manual
- June 3, 2024
- Hama
Table of Contents
hama 201630 51W, 1x USB-A Quick Charge
Comonents
Operating instruction
Thank you for choosing this Hama product! Take your time and read the following instructions and information completely.Please keep these instructions in asafe place for future reference.
Explanation of warning symbols and notes
Risk of electric shock
This symbol indicates arisk of electric shock from touching uninsulated
product parts that may carry hazardous voltage.
Warning
This symbol is used to indicate safety instructions or to draw your
attention to specifichazards and risks.
Note
This symbol is used to indicate additional information or important notes.
Package contents
- Charging station, 5-port, 51 W
- 1xpower cord
- These operating instructions
Safety instructions
- Protect the product from dirt, moistureand overheating and use it in dry rooms only.
- Do not drop the product and do not expose it to any major shocks.
- Do not operate the product outside the power limits specified in the technical data.
- Do not modify the device in any way. Doing so voids the warranty.
- Do not continue to operate the product if it is visibly damaged.
- Use the product only for the intended purpose.
- As with all electrical products, this device should be kept out of the reach of children.
- Do not use the product in the immediate vicinity of heaters, other heat sources or in direct sunlight.
- Route all cables so there isnorisk of tripping.
- Donot bend or crush the cable.
- Always pull directly on the plug when disconnecting the cable, never on the cable itself.
- Dispose of packaging material immediately in accordance with the locally applicable regulations.
- The product is intended only for use inside buildings.
- Only use the article under moderate climatic conditions
- Donot use the product in areas in which electronic products arenot permitted.
- Donot use the product in adamp environment and avoid splashing water.
Risk of electric shock
- Donot open the device or continue to operate it if it becomes damaged.
- Donot use the product if the AC adapter,the adapter cable or the mains cable aredamaged.
- Donot attempt to service or repair the product yourself.Leave any and all service work to qualified experts.
Operation
Note -mains voltage 100 -240 V
The charger is suitable for mains voltages of 100 -240 Vand thereforecan be used worldwide. Please note that acountry-specificadapter may be necessary.
Warning -connecting devices
- Beforeconnecting aterminal device, check whether the power output of the charger can supply sufficient power for the device.
- Ifports USB-A1 +2+3 areused simultaneously,the maximum output power (for technical reasons) is 15 W(5V /3A).
- Please refer to the instructions in the operating manual of your terminal device.
Note -Power Delivery /QC3.0, 2.0
- Plug &GO: no additional softwarerequired, simply plug in and start: Thanks to Power Delivery /QC3.0, 2.0, the voltage and power areadjusted automatically.
- Beawarethat, for efficient and optimised charging, your terminal device must support the PD (Power Delivery) /QC3.0, 2.0 function.
- Ifyou have alarge number of PD/QC-enabled devices with different firmwareupdates, it may be that the function is not fully supported.
Warning
- Only operate the product from asocket that has been approved for the device. The socket must be installed close to the product and must be easily accessible.
- Disconnect the product from the power supply using the On/Off switch –ifthis is not available, unplug the power cordfromthe socket.
- Ifusing amulti-socket power strip, make surethat the total power consumption of all connected devices does not exceed the power strip’s maximum throughput rating.
- Ifyou will not be using the product for a prolonged period, disconnect it from mains power.
Unless different instructions have been expressly given in the operating instructions for the devices you arecharging, proceed as follows:
- Connect your device to aUSB charging socket using asuitable USB cable.
- Connect the charger to aproperly installed and easily accessible mains socket.
- The charging process is displayed on your device.
- Disconnect the device from the charger if you wish to interrupt the charging process or when the device is fully charged.
- Then disconnect the charger from the line connection.
When charging the rechargeable batteries in the device, note the maximum charging times for the built-in batteries.
Care and maintenance.
Only use soft, dry towels to clean the product.
Note
Disconnect the device from the mains before cleaning and during prolonged periods of non-use.
Technical data
Speci fi cations according to Regulation (EU) 2019/1782
Brand name, commercial register number, address| Hama, HRA12159,
Dresdner Str. 9,
86653 Monheim, Germany
Model identifier| 00201630
Input voltage| 100 – 240 V
Input AC frequency| 50 / 60Hz
Output voltage / output current / output power total
| Output USB-C PD: 5.0 V DC/ 3.0 A/ 15.0 W
9.0 V DC/ 2.0 A/ 18.0 W
12.0 V DC/ 1.5 A/ 18.0 W
Output USB-A QC: 3.6 V – 6.0 V DC/ 3.0 A/
10.8 W – 18.0 W
6.0 V – 9.0 V DC/ 2.0 A/
12.0 W – 18.0 W
9.0 V – 12.0 V DC/ 1.5 A/
13.5 W – 18.0 W Output USB-A1, A2, A3:
5.0 V DC/ 3.0 A/ total max. 15.0 W Total Output 51.0 W
Average efficiency during operation| 84.8 %
Efficiency at low load (10%)| 80.9 %
Power consumption at zero load| 0.29 W
Warranty disclaimer
Hama GmbH &CoKG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>