noka TECH Compact Pro 820 LED Grow Light User Manual
- June 3, 2024
- noka TECH
Table of Contents
noka TECH Compact Pro 820 LED Grow Light
SCAN FOR LATEST USER MANUALS
INTRODUCTION
Thank you for purchasing the COMPACT Pro 820 LED horticultural fixture and
joining the NOKA tech users club. This manual contains all the information
needed to learn, install and use the product. Please read this manual
carefully before trying to install and/or operate the COMPACT Pro 820 fixture.
If you are not comfortable installing high-performance lighting systems, you
should always look for the services of a qualified professional. We highly
recommend you keep this manual for future reference. Furthermore, you should
always check for the latest version manual on our webpage
www.nokatechs.eo.uk/support. At the end
of this manual, you will find the date of the last edit.
We hope to get your feedback no matter it is good or bad. Your valuable
reviews help us take the products to the next level.
For any information, don’t hesitate to contact: [email protected] + 44 7984 91 7932 www.nokatechs.co.uk
PRODUCT DESCRIPTION
COMPACT Pro 820 is an electronic horticultural LED fixture with a frame made using high-quality anodised aluminum in a very comfortable design. It is a high-performance fixture suitable for any scale full-cycle horticulture cultivation: from propagation and cloning through vegetative growth and blooming stages. In this manual, the product Compact Pro 820 will be referred to as: ‘the fixture’ or ‘LED fixture’. This LED fixture is for indoor use only (climate-controlled indoor farms and grow rooms). But it is not meant for use in dwellings for general or architectural purposes illumination. The spectrum output for this LED fixture is specially designed and manufactured for horticulture use only. Any use other is considered unintended use. NOKA techs can’t be held responsible for any possible damage caused by incorrect, impropriate and/or inadvisable use of the fixture.
WARNING
This warning sign notes the possibility of injury to the user and/or damage to
the product if the user does not perform the procedures as described.
ATTENTION
This attention sign notes the problems which may occur if the user does not
perform the procedures as described.
PRODUCT SPECIFICATIONS
SPECIFICATIONS
- Dimensions (L.W.H): 740 x 340 x 90mm I 29 x 13.5 x 3.5in
- Gross weight: 1 6.3kg / 35. 9Ibs
- Max input power: 820W
- Input voltage: 220-240V
- Dimming: 0- 1 0V Dimmable & button
- THD: 20%
- Max PPF: 2000 μmolls
- Efficacy: 2.5 μmol
- LE D diodes: Seoul (white) San’an (blue) & Osram (red)
- Max ambient 40°C I 104° F
- Beam angle: 120°
COMPACT Pro 820 fixture uses high quality very efficient Seoul 5050 6500k (white), San’an 450nm (blue), and Osram 660nm (red) LEDs to create a balanced full spectrum light best suitable for photosynthesis.
SAFETY RECOMMENDATIONs
Please carefully read recommendations and warnings before assembling and
using the fixture!
The installation and use of the fixture is the responsibility of the end user.
Incorrect installation can cause damage to the product. The warranty shall
become void if the product and/or electronic components are damaged due to
incorrect installation.
WARNING
- Always adhere to the local building and electrical codes (local rules and regulations) when installing or using the fixture.
- Do not open and/or disassemble the LED fixture as it contains no serviceable parts inside. Opening and/or modifying the LED fixture can be
- Connect the system only to the power sources of the appropriate voltage using the plug received with the fixture.
- Always switch off the main voltage before commencing installation or maintenance work. Let the fixture cool down for at least 20-30 minutes before proceeding, as it gets hot while operating, especially the heatsink and LEDs.
- Never look directly into the light source while fixture is turned on. Doing so can cause damage to the eyes. Special glasses are recommended while being in the grow facility with the grow light fixture turned on.
- Do not use the product when either the fixture or its power cable are damaged. Modifications to the cables can lead to unwanted electromagnetic effects which may damage the product.
- Do not defeat the safety purpose of a grounding or polarized plug by removing ground pins or using unsafe adapters. You may replace the power cable with correctly rated cable only.
- Protect power cables from being pinched, walked on, or otherwise damaged. Be especially careful where the power cable enters the power outlet and the unit.
- The fixture is passively cooled with zero moving components. Natural convection removes heat away from the heatsink. In order for the system to properly cool itself, at least 20cm (Sin) of clearance for your fixture on all sides is recommended.
- Do not use the LED fixture near flammable, explosive or reactive substances. Fixture reaches high temps while in use.
Please carefully read recommendations and warnings before assembling and
using the fixture!
The installation and use of the fixture is the responsibility of the end user.
Incorrect installation can cause damage to the product. The warranty shall
become void if the product and/or electronic components are damaged due to
incorrect installation.
ATTENTION
- Never pull the cord to unplug the fixture, pull the plug only.
- The fixture produces very high-intensity light and was originally designed for commercial growing operations. Please take care to consider proximity to plants when installing your fixture. You may want to allow more vertical space (90- l 00 cm recommended) between the plant canopy and the fixture to mitigate the high intensity light and heat in the plant area.
- Hang the fixture with a strong cord or chain from both ends. Make sure you have hooks solidly screwed into the studs in the ceiling. The hooks should be rated to hold at least 23 kg (50 lbs) each. Insert expansion anchors into the ceiling if you cannot locate the studs.
- To ensure the safe operation of the LED fixture, it is necessary to control the temperature of the grow room by mechanical ventilation or cooling system to below the maximum ambient operating temperature of 40°C (95° F).
- Do not use sulfur vaporizers or water misters. Sulfur and calcium deposits on your reflector will decrease its efficiency.
- Do not clean the fixture with detergents, abrasives, or other aggressive substances.
PRODUCT INSTALLATION
Please carefully read recommendations and warnings before assembling and
using the fixture!
The installation and use ot the tixture is the responsibility of the end user.
Incorrect installation can cause damage to the product.
The warranty shall become void it the product and/or electronic components are
damaged due to incorrect installation.
What is included in the box?
- LED fixture: 1 unit
- AC power cord: 1 piece, 3m (1 Oft)
- ‘V’ hanger: 2 pieces
- RJ cable: 1 piece
Preparation for installation
-
Refer to your light plan. Arrange the place for the fixture to be mounted. Prepare steel cables and appropriate “hangers” or any other
tools to hang the fixture, as it will have to hold significant weight. -
Remove the fixture from the packaging and check contents. Check if the power cord is not damaged and safe to use.
-
Bring any additional tools and/or hardware that may be required to mount the fixture.
-
Switch off the main voltage.
WARNING
- Mounting and installing the fixture must be in accordance with the applicable local laws and regulations.
- Make sure the local cabling can support the voltage and current requirements of the fixture.
- The installer is responsible for correct and safe installation.
Fixture installation
The COMPACT Pro 820 comes equipped with 6 hanging points, three on either end
of the fixture’s housing. It is recommended to use the “V” metal hanger
placing them on both ends-plates of the fixture. If you decide to use only the
middle hanging points to hang the LED fixture, it might not hold the ideal
horizontal position.
The product is equipped with a 3m (l Oft) power cord. Firstly connect the
fixture with a power cable. Only then plug the power cable into the electrical
socket, and you are ready to go.
WARNING
- Never block the cooling fins on the fixture. In order for the system to properly cool itself, at least 20cm (Sin) of clearance for your fixture on all sides is recommended.
- To ensure the safe operation of the LED fixture, it is necessary to control the temperature of the grow room by mechanical ventilation or cooling system to below the maximum ambient operating temperature of 40°C (l 04° F).
- Hang the fixture to appropriate “hangers” or any other tools rated to hold at least 23 kg (50 lbs) each.
When routing the fixture power cord ensure that:
- The cord is not concealed or extended through a wall, floor, ceiling, or other parts of the building structure, such as above a suspended or dropped ceiling.
- The routed cord is not subject to strain, and is protected from physical damage.
- The cord is not permanently affixed to the building structure.
Connecting LED fixtures to external 0-1 OV controller
Connect controller (output) using RJ cable to fixture connector. Using the
second RJ cable, connect the current fixture to the next one. This way, you
can connect up to 80 LED fixtures on one chain. Most of the controllers can
support at least 2 chains.
ATTENTION
- Always switch off the main voltage before connecting the fixtures to the chain.
- The dimming button on all fixtures has to be adjusted to E.X.T.
MAINTENANCE
In the event that the product is detective or damaged, contact the reseller from whom you purchased the fixture
WARNING
- Always switch off the main voltage before commencing installation and/or maintenance work.
- High voltage: risk of fire & risk of shock.
- Do not connect or disconnect the LED fixture under load.
- Don’t touch. Fixture reaches high temps while in use. Always wait 20 – 30 minutes for the fixture to cool down.
- Never open or disassemble the product. It will void the warranty and will break the water-tight seal.
- The fixture and power supply are not designed to be submerged in water.
ATTENTION
- Do not clean the LED fixture with detergents, abrasives, and/or any other aggressive substances, such as solvents, acetone, alcohol, alkaline cleaners, windows cleaners, and similar.
- Regularly check the power cables of the fixture to ensure it is undamaged and safe to use.
- Check the product regularly for the build-up of dust and dirt. Clean the product if necessary.
- To limit degradation, avoid touching the diodes with your hands, even in a powered-off state.
Cleaning the LED fixture
Allow the fixture to cool down to room temperature before starting cleaning
it. You can clean the outside of the fixture using a dry or damp cloth or: a
vinegar and water solution (l: l 00 ratio) ; a hydrogen dioxide and water
solution ( < l 0: l 00 ratio).
STORAGE, DISPOSAL & WARRANTY
You can store the LED fixture in a dry and clean environment, with an ambient temperature of 0°C to 45°C. The product must not be discarded as unsorted municipal waste. It must be collected separately for treatment, recovery, and environmentally sound disposal.
Warranty
NOKA tech warrants the mechanical and electronic components of the product to
be free of defects in material and workmanship if used under normal operating
conditions for a period of five (5) years from the original date of purchase.
This Limited Product Warranty does not cover any damage due to: (a)
transportation; (b) storage; (c) improper use; (d) failure to follow Product
instructions; (e) modifications; (f) unauthorized repair; (g) normal wear and
tear (including powder coat); (h) external causes such as accidents, abuse, or
other actions or events beyond NOKA techs’ reasonable control.
If the product shows any defects within this period and that defect is not due to user error or improper use we (if you bought from Noka Techs Ltd) or another reseller you bought from, shall, at its discretion, either replace or repair the product using suitable new or reconditioned products or parts. In case it is decided to replace the entire product, this limited warranty shall apply to the replacement product for the remaining initial warranty period, i.e. five (5) years from the date of purchase of the original product. For service, return the product to the reseller/shop you bought from with the original sales receipt. For more information visit www.nokatechs.eo.uk/warranty
Always check for the latest user manuals on our webpage www.nokatechs.eo.uk/support Last edited: l 7.06.2022