hama 00 121703 Active DVB-T2 Indoor Antenna Instruction Manual

hama 00 121703 Active DVB-T2 Indoor Antenna

Operating instruction

Thank you for choosing a Hama product. Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference. If you sell the device, please pass these operating instructions on to the new owner.

Controls and Displays

1. Micro-USB input
2. Antenna cable
3. Operating LED
4. On/off switch
5. Fastening screw for base / wall bracket

Explanation of Warning Symbols and Notes

Warning
This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.

Note
This symbol is used to indicate additional information or important notes.

Package Contents

• DVB-T Indoor Antenna
• USB cable
• Base / wall bracket
• These operating instructions

Safety Notes

• The product is intended for private, non-commercial use only.
• The product is intended for indoor use only.
• Use the product for its intended purpose only.
• Protect the product from dirt, moisture and overheating and use it in dry rooms only.
• Children should be supervised to ensure that they do not play with the device.
• Do not use the product in areas where the use of electronic devices is not permitted.
• Connect the product only to a socket that has been approved for the device. The electrical socket must always be easily accessible.
• Disconnect the product from the network using the power button – if this is not available, unplug the power cord from the socket.
• Lay all cables so that they do not pose a tripping hazard.
• Do not bend or crush the cable.
• Do not drop the product and do not expose it to any major shocks.
• Dispose of packaging material immediately according to locally applicable regulations.
• Do not modify the device in any way. Doing so voids the warranty.

Warning

• Do not use the product if the AC adapter, adapter cable or power cable is damaged.
• Do not attempt to service or repair the device yourself. Leave any service work to qualified experts.
• Do not open the device or continue to operate it if it becomes damaged.

Specifications

Getting started and operation
Powering the antenna using the antenna cable

• Connect the coaxial cable of the antenna to the antenna input on the digital TV or set-top box.
• Switch the antenna on using the on/off switch (4). The LED (3) lights up.
• Switch on the digital TV (and the set-top box, if present).

Note
Powering the antenna directly from the set-top box or digital TV requires a supply voltage of 5 V. Note that the voltage of+5 V is provided by the set-top box and/or digital TV. Make any necessary settings in the menu.

Powering the antenna directly using the USB port of the digital TV / set- top box

• Connect the coaxial cable of the antenna to the digital TV or set-top box.
• Connect the USB cable to an unused USB port on your TV or set-top box.
• Switch the antenna on using the on/off switch (4). The LED (3) lights up.
• Ensure that the set-top box or digital TV is switched on.

Powering the antenna using an external power supply unit

• Connect the coaxial cable of the antenna to the antenna input on the digital TV or set-top box.
• Connect the USB cable to the antenna and to a suitable USB power supply unit (not included) and plug the latter into a socket.
• Switch the antenna on using the on/off switch (4). The LED (3) lights up.
• Switch on the digital TV (and the set-top box, if present).

Standing the antenna wall mounting
The antenna can be stood vertically or horizontally thanks to a base that can be flexibly fixed in place; or it can be mounted to a wall. Release the fastening screw (5) and secure the base with the screw in accordance with how you would like to stand the antenna. For wall mounting, please use suitable screws and wall anchors (not included in the delivery package) to attach the bracket (base) to the wall.

Note – Wall mounting

• Before mounting, check that the wall you have chosen is suitable for the weight to be mounted Also make sure that there are no electric, water, gas or other lines running through the wall at the mounting site.
• After the product has been mounted, check that it is sufficiently secure. You should repeat this check at regular intervals.

TV reception

Note
Please note that the number and quality of stations received may vary depending on the position of the antenna and local conditions.

Radio reception

• The antenna can also be used for DAB reception.
• As most audio devices have an F-plug connection, please use a coax socket-F socket adapter (not included).

Note
Please note that the number and quality of stations received may vary depending on the position of the antenna and local conditions.

Care and Maintenance

Only clean this product with a slightly damp, lint-free cloth and do not use aggressive cleaning agents.

Warranty Disclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.

Service and Support

Please contact Hama Product Consulting if you have any questions about this product.

• Hotline: +49 9091 502-0 (German/English) Further support information can be found here: www.hama.com

Hama GmbH & Co KG 86652 Monheim / Germany All listed brands are trademarks of the corresponding companies. Errors and omissions excepted, and subject to technical changes. Our general terms of delivery and payment are applied.

References

• hama.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>