Honeywell Midas-M Multi Gas Relay Module User Manual
- June 3, 2024
- Honeywell
Table of Contents
Honeywell Midas-M Multi Gas Relay Module
Introduction
The Midas-M Relay Module contains:
-
Nine relays to activate external devices.
-
Eight gas alarm relays which indicate level 1 and level 2 alarms of each channel.
-
A common fault relay which indicate maintenance fault or instrument fault.
CAUTION
Failure to observe the following precautions can cause injury to persons or damage to property: -
When the MidasM Relay Module reaches the end of its life, it should be disposed of by local regulations.
-
Do not use cleaning solvents or abrasives to clean the Relay Module.
-
Do not attempt to modify the product in any way from the manufacturer’s design or specification. Warranty will be void and malfunction of the gas detector may result.
-
Use only genuine spare parts and accessories with Midas-M. Malfunctions may result if non-standard parts are used.
-
Installation must be by the recognized standards of the appropriate authority in the country concerned. For Europe, see EN60079-14,EN60079-29-2, and EN61241-14. For installations in North America, the National Electrical Code (NFPA 70) should be strictly observed. All the appropriate local and national regulations should be observed.
Note: Instrument grounding is required to ensure stable performance and to limit the effects of radiofrequency interference before installation.
What’s in the Box
- 1 Relay Module
- 1 Cable Gland
- 1 Quick Reference Guide
- 2 screws (for mounting the module)
Overview
Mounting the Relay Module
-
Pull out the four screws and remove the plate cover.
-
Partially screw the fixings into the mounting surface.
Place the Relay module over the screws, so they pass through the holes to locate in the slots.
Tighten the screws to fix the Relay Module to the surface. -
Connect the wire through the cable gland to the terminal block.
-
Place the plate cover in position and screw the four screws you removed in Step 1.
-
Push the mounting bracket assembly horizontally and engage the Relay Module connector.
-
Align the screw holes and the slot-boundaries, and tight the machine screws(3016D0355) provided in packaging.
Connect the mounting bracket assembly to the Relay Module.
Contact Us
Americas
Honeywell Analytics
405 Barclay Boulevard
Lincolnshire, IL 60069
Tel: +1 847 955 8200
Toll free: +1 800 538 0363
Fax: +1 847 955 8208
detectgas@honeywell.com
Europe, Middle East,and Africa
Life Safety Distribution
AG(LSD)
Javastrasse 2
8604 Hegnau
Switzerland
Tel: +41 (0)44 943 4300
Fax: +41 (0)44 943 4398
gasdetection@honeywell.com
Asia Pacific, India.
HoneywelL Analytics Asia Pacific, Co., Ltd. 7F
SangAm IT Tower,
434 Worldcup Buk-ro, Mapo-gu,
Seoul 03922, South Korea
Tel: +82 (0 2 6909 0300
Fax: +82 (02 2025 0388
India Tel: +91 1244752 700
Analytics.ap@honeywell.comn
Mainland China
Honeywell Industrial Safety Gas Detectors
Building#L, 555 Huanke Road zhangJiang Hi-lech
Park Pudong New Area Shanghai 201203, China
Tel: 021-80386800
Fax: 021-60246070
gaschina@honeywell.com
Taiwan
Honeywell Taiwan Ltd
bF-2, No.8, ZiQiang S. Road, Jubei City, 30264
Taiwan
Tel:+886-3-5169284
Fax: +886-3-5169339
analytics.tw@honeywell.com
Manuals and other information about this product are available at:
www.honeywellanalytics.com/en/products/
Midas-M
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>