velleman VTSS5U Low-Cost Soldering Station Instruction Manual
- June 3, 2024
- Velleman
Table of Contents
VTSS5U Low-Cost Soldering Station
Instruction Manual
VTSS5U Low-Cost Soldering Station
Resistor
| • R1, R2: 68 ohm | blue, grey, black |
|---|---|
| • R3: 470 ohm | yellow, purple, brown |
| • R4: 10K | brown, black, orange |
| • R5: 1K5 | brown, green, red |
Zener diodes
Watch the polarity!
- D1, D2: 3,6 V – 500 mW
Capacitors
- C1, C2: 100nF
Button
- SW1
WSXL104-06052022
IC socket
Watch the notch!
- U1 – 8 pins
Pin header
- SK2
USB connector
- SK1
LEDs
Watch the polarity !
- LD1 … LD14: diffused RGB LED – 5 mm
- LD15 … LD19: diffused RGB LED – 8 mm
IC
- U1 – ATtiny 85 pre-programmed
Hooks (optional)
pre-solder
- SK9 & SK10
Soldering
Follow the tutorial and learn how to solder on:
TO ALL RESIDENTS OF THE EUROPEAN UNION
Important environmental information about this product
This symbol on this unit or the package, indicates that disposal of this unit
after its lifecycle could harm the environment. Do not dispose the unit as
unsorted municipal waste; it should be disposed by a specialized company for
recycling. This unit should be returned to your distributor or to a local
recycling service. Respect the local environmental rules. If any doubt contact
your local authorities about waste disposal rules.
www.whadda.com/start-to-solder