hama 00184125 True Wireless Earbuds Instruction Manual

June 3, 2024
Hama

hama 00184125 True Wireless Earbuds

hama 00184125 True Wireless Earbuds productThank you for choosing a Hama product.
Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference. If you sell the device, please pass these operating instructions on to the new owner

Controls and displays

  1. Charging box
  2. Charging box status LED
  3. Earphones status LED
  4. Multi-function touch sensor
  5. Silicone ear pads
  6. Charging contacts
  7. Micro-USB connection

Explanation of warning symbols and notes

Warning
This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks
Note
This symbol is used to indicate additional information or important notes

Package contents

  • 1 x “Spirit Chop” True Wireless Bluetooth® earphones
  • 1 x charging box
  • 1 x USB charging cable
  • 3 pairs of ear pads in various sizes (S/M/L)
  • 1 x quick guide
  • 1 x warning and safety instructionshama 00184125 True Wireless Earbuds 02

Safety instructions

  • The product is intended for private, non-commercial use only.
  • Use the product only for the intended purpose.
  • Children should be supervised to ensure that they do not play with the product.
  • Do not use the product in areas in which electronic products are not permitted.
  • Do not attempt to service or repair the product yourself.  Leave any and all service work to qualified experts.
  • Do not open the device or continue to operate it if it becomes damaged.
  • Do not bend or crush the cable.
  • Do not drop the product and do not expose it to any major shocks.
  • Dispose of packaging material immediately in accordance with the locally applicable regulations.
  • Do not modify the product in any way. Doing so voids the warranty.
  • Protect the product from dirt, moisture and overheating and use it in dry environments only.
  • Do not use the product in the immediate vicinity of heaters, other heat sources or in direct sunlight.
  • Only use the article under moderate climatic conditions.
  • As with all electrical products, this device should be kept out of the reach of children.
  • Do not operate the product outside the power limits specified in the technical data.
  • Do not use the product in a damp environment and avoid splashing water
  • While driving a car or using sports equipment, do not allow yourself to be distracted by your product and keep an eye on the traffic situation and your surroundings.
  • The battery is permanently installed and cannot be removed; dispose of the product as a whole in accordance with the statutory regulations.
  • Do not incinerate the battery or the product.
  • Do not tamper with or damage/heat/disassemble the batteries/rechargeable batteries.
  • Do not use the product during the charging process!

Warning – rechargeable battery

  • Only use suitable charging devices or USB connections to charge the product.
  • Do not use defective chargers or USB ports and do not attempt to repair them.
  • Do not overcharge the product or allow the battery to completely discharge.
  • Avoid storing, charging and using in extreme temperatures and at extremely low atmospheric pressures (such as at high altitudes).
  • Charge regularly (at least quarterly) during periods of prolonged storage.

Warning – magnets

  • This product generates magnetic fields. Persons with a cardiac pacemaker should consult a doctor before using this product, as the pacemaker’s proper function could be affected.
  • Do not store bank or similar cards with magnetic strips near the charging box or earphones. The data on the cards could be damaged or completely deleted

Warning – high volume

  • High sound pressure!
  • There is a risk of hearing damage.
  • To prevent any loss of hearing, avoid listening at loud volumes for prolonged periods.
  • Always keep the volume at a sensible level. Loud volumes, even over short periods, can cause hearing loss.
  • Using this product limits your perception of ambient noise. For this reason, do not operate any vehicles or machines while using this product.

Switching on/off

  • ON :Remove the two headphones simultaneously from the charging box. Both earphones switch on automatically and start the pairing process.
    Alternative:
    Press the multi-function touch sensor (4) on the left and right earphones for approx 2-3 seconds until you hear a signal sound.

  • OFF: To switch them off, simply place the earphones back in charging box. Ensure that the earphones are inserted into the correct sides, using the L/R markings as a guide.
    Alternative:
    With the earphones switched on, hold the multi-function touch sensor (4) on the left or right earphone down for approx. 5 seconds until you hear a signal sound.

hama 00184125 True Wireless Earbuds 03 Note – Automatic switch-off of the earphones
The earphones are equipped with an automatic switch-off mechanism. If there is no connection to your device within 30 minutes, they switch off automatically.

Charging

Fully charge the earphones and the charging box once before using them for the first time.

  1. Insert the earphones and connect the charging box
    Place the earphones in the charging box. Ensure that the earphones are inserted into the correct sides, using the L/R markings as a guide.
    Connect the USB charging cable included to the charging socket (7) on the charging box. Connect the free plug on the micro-USB charging cable to a suitable USB charger. To do this, consult the operating instructions for the USB charger you are using.

  2. Charging procedure for the charging box and earphones
    The status LED on the charging box (2) flashes red during the charging process. Once the charging box is fully charged, the charging box LED (2) lights up red.
    The status LEDs on the earphones (3) light up solid red during the charging process. Once the earphones are fully charged, the status LEDs (3) light up green for around 30 seconds and then the status LEDs go out.
    It can take up to 2.5 hours (earphones) or up to 3.5 hours (charging box) until the batteries are fully charged.

  3. Battery capacity
    Charging box
    When battery levels are low (< 10%), the status LED (2) flashes red.
    Earphones
    When battery levels are low, the status LED (3) flashes red.
    The actual battery life will vary depending on how you use the device, the settings and the ambient temperatures (rechargeable batteries have a limited life).
    Note
    If you have not used the device for a few months, it can take up to 15 – 30 minutes until the status LED (2/3) lights up red during the charging process.

Bluetooth® pairing

Note – Pairing

  • Make sure that your Bluetooth®-capable device is switched on and that Bluetooth® is activated.
  • For more information, please refer to the operating instructions of your device.

The earphones and the device should not be more than 1 metre apart.
The shorter the distance, the better.
Ensure that the earphones are switched on.

  1. Check the status of the status LED (3)
    If the status LED (3) on the left earphone flashes alternately: the earphones are searching for a Bluetooth® connection.
    If the status LEDs (3) are flashing and then go out: the earphones are already paired with a Bluetooth® device.

  2. Search using your device for the earphones (only required on the first connection)
    Open the Bluetooth® settings on your device and wait until the list of found Bluetooth® devices shows Hama Spirit Chop.
    Select Hama Spirit Chop and wait until the earphones are shown as connected in your device’s Bluetooth® settings. You will hear a brief signal sound.

Note – Bluetooth® password
Some devices require a password in order to connect to another Bluetooth® device
If your device requests a password to connect to the earphones, enter 0000

Controls

Note

  • Please be aware that your terminal device must support some functions if they are to be used.
  • For more information, please refer to the operating instructions of your device.
Voice assistant function

Tap the multi-function touch sensor (4) on the left or right earphone three times to initiate communication with Siri or the Google Assistant۔ Note – Siri
Siri is only available on suitable devices running iOS 5 (iPhone 4s or later) or higher۔
Note – Google Assistant

  • The Google Assistant is only available on suitable devices running Android 5.0 or higher with Google Play Services, >1.5 GB of free memory and a minimum screen resolution of 720P۔
  • The Google Assistant App must be available on your device and be set as the default voice assistant۔
Hands-free function

It is possible to use the earphones like a hands-free facility for your device

  1. Make a call
    Dial the number directly via your device to make a call

  2. Accept a call

  3. Tap the multi-function touch sensor (4) on the left or right earphone once to accept an incoming call.

  4. To reject an incoming call, tap and hold the multi-function touch sensor (4) on the left or right earphone for around 1 seconds. You will hear a brief signal sound.

  5. During the call, tap the multi-function touch sensor (4) on the left or right earphone twice to end the call. You will hear a brief signal sound.

  6. Last number redial
    You can redial the last number you called via the voice assistant function (7.1).

Audio playback
  1. Start playback on your device.

  2. Play / Pause
    Tap the multi-function touch sensor (4) on the left or right earphone once to start or stop audio playback.

  3. Next track
    Tap the multi-function touch sensor (4) on the right earphone twice to skip to the next track.

  4. Previous track
    Tap the multi-function touch sensor (4) on the left earphone twice to skip to the previous track.

Volume control

The volume is controlled by the voice assistant function (7.1). Alternatively, you can also control the volume via your smartphone.

Technical data

Bluetooth ® earphones

Bluetooth technology| Bluetooth® v5.0
Profiles supported| A2DP 1.3 / AVRCP 1.6 / HFP 1.7 / SPP 1.2
Frequency for Bluetooth ® transmissions| 2402 – 2480 MHz
Range| < 10 m
Rechargeable battery
Battery type| 3.7 V Li polymer
Min. capacity of earphones / charging box| 43 mAh / 390 mAh
Charging box current consumption| max. 5 V    200 mA
Earphones charging time| ~ 2.5 h
Charging box charging time| ~ 3.5 h
Standby | ~ 150 h
Music playing
| ~ 4 h
**Call time *| ~ 4 h
Weight of earphones| approx. 4 g per earphone
Weight of charging box incl. earphones**| approx. 41 g

Care and maintenance

Only clean this product with a slightly damp, lint-free cloth and do not use aggressive cleaning agents.

Warranty Disclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.

Service and Support

Please contact Hama Product Consulting if you have any questions about this product.
Hotline: +49 9091 502-0 (German/English)
Further support information can be found here: www.hama.com

Declaration of Conformity

Hama GmbH & Co KG hereby declares that the radio equipment type [00184125, 00184126, 00184127, 00184083] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
www.hama.com -> 00184125, 00184126, 00184127, 00184083 -> Downloads.

Frequency band(s) 2402 – 2480 MHz
Maximum radio-frequency power transmitted 2,5mW E.I.R.P.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals