hama 00184148 MyVoice 700 Bluetooth Mono Headset Instruction Manual
- June 3, 2024
- Hama
Table of Contents
- 00184148 MyVoice 700 Bluetooth Mono Headset
- Controls and displays
- Explanation of warning symbols and notes
- Package contents
- Safety instructions
- Switching on/off
- Charging
- **** Bluetooth® pairing
- Controls
- **** Care and maintenance
- Warranty disclaimer
- Service and Support
- Declaration of Conformity
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
00184148 MyVoice 700 Bluetooth Mono Headset
Instruction Manual BLUETOOTH ® MONO HEADSET “MyVoice700”
00184148 MyVoice 700 Bluetooth Mono Headset
Operating Instructions
Thank you for choosing a Hama product. Take your time and read the
following instructions and information completely . Please keep these
instructions in a safe place for future reference. If you sell the device,
please pass these operating instructions on to the new owner.
Controls and displays
- Earhooks
- Multi-function button
- + button
- – button
- Status LED
- Silicone ear pads
- Microphone
- Micro-USB connection
Explanation of warning symbols and notes
Warning
This symbol is used to indicate safety instructions or to draw your attention
to specific hazards and risks .
Note
This symbol is used to indicate additional information or important notes.
Package contents
1x “MyVoice700” Bluetooth ® headset
1x micro-USB charging cable
1x earpads
1x earhooks
1x quick guide
1x warning and safety instructions
Safety instructions
- The product is intended for private, noncommercial use only .
- Use the product only for the intended purpose .
- Children should be supervised to ensure that they do not play with the product .
- Do not use the product in areas in which electronic products are not permitted .
- Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.
- Do not open the device or continue to operate it if it becomes damaged.
- Do not bend or crush the cable.
- Do not drop the product and do not expose it to any major shocks.
- Dispose of packaging material immediately in accordance with the locally applicable regulations.
- Do not modify the product in any way. Doing so voids the warranty .
- Protect the product from dirt, moisture and overheating and use it in dry environments only .
- Do not use the product in the immediate vicinity of heaters, other heat sources or in direct sunlight.
- Only use the article under moderate climatic conditions.
- As with all electrical products, this device should be kept out of the reach of children .
- Do not operate the product outside the power limits specified in the technical data .
- Do not use the product in a damp environment and avoid splashing water
- While driving a car or using sports equipment, do not allow yourself to be distracted by your product and keep an eye on the traffic situation and your surroundings.
- The battery is permanently installed and cannot be removed; dispose of the product as a whole in accordance with the statutory regulations.
- Do not incinerate the battery or the product.
- Do not tamper with or damage/heat/disassemble the batteries/rechargeable batteries.
- Do not use the product during the charging process!
Warning – rechargeable battery
- Only use suitable charging devices or USB connections to charge the product .
- Do not use defective chargers or USB ports and do not attempt to repair them .
- Do not overcharge the product or allow the battery to completely discharge .
- Avoid storing, charging and using in extreme temperatures and at extremely low atmospheric pressures (such as at high altitudes).
- Charge regularly (at least quarterly) during periods of prolonged storage.
Warning – magnets
- This product generates magnetic fields . Persons with a cardiac pacemaker should consult a doctor before using this product, as the pacemaker’s proper function could be affected.
- Do not store bank or similar cards with magnetic strips near the charging box or earphones. The data on the cards could be damaged or completely deleted.
Warning – high volume
- High sound pressure!
- There is a risk of hearing damage.
- To prevent any loss of hearing, avoid listening at loud volumes for prolonged periods.
- Always keep the volume at a sensible level. Loud volumes, even over short periods, can cause hearing loss.
- Using this product limits your perception of ambient noise . You should therefore not drive or operate machinery while using them .
Switching on/off
ON
Press the MFB button (2) for approx . 1-2 seconds until the announcement
“Power on” is heard and the LED (5) flashes blue three times .
OFF
To switch off, press the MFB button (2) for approx . 5-6 seconds until the
announcement “Power off” is heard, the LED (5) flashes red three times and
then goes out.
Note – Automatic switch-off of the product
The product is equipped with an automatic switch-off mechanism . If there is
no connection to your device within 3 minutes, it switches itself off
automatically .
Charging
Fully charge the headset once before using it for the first time .
Switch off the headset and connect it
Ensure that the headset is switched off before charging it.Connect the USB charging cable included to the charging socket (8) .
Connect the free plug on the micro-USB charging cable to a suitable USB
charger. To do this, consult the operating instructions for the USB charger
you are using .
Headset charging process
The LED (5) lights up solid red during the charging process . Once the
charging process is complete, the LED (5) lights up blue .
It can take up to 2 hours for the battery to be fully charged.
Battery capacity
When the headset battery capacity is low, the LED (5) flashes red and the
announcement “Battery Low” is heard .
Note
If you have not used the product for a few months, it can take up to 15 – 30
minutes until the status LED (5) lights up red during the charging process .
**** Bluetooth® pairing
Note – Pairing
- Make sure that your Bluetooth ® -capable device is switched on and that Bluetooth® is activated .
- For more information, please refer to the operating instructions of your device .
The headset and the device should not be more than 1 metre apart . The shorter the distance, the better. Switch the headset on using the MFB button (2) .
Check the status of the status LED (5) and the announcements
If the LED (5) is flashing alternately and the announcement is:
Headset searching for a Bluetooth® connection.
If the LED (5) is flashing and the announcement is:
The headset is already paired with a Bluetooth® device.
Search using your device for the headset (only required on the first
connection)
Open the Bluetooth® settings on your device and wait until the list of found
Bluetooth ®devices shows Hama MyVoice700. The announcement “Pairing” is heard.
Select Hama MyVoice700 and wait until headset is listed as connected in the
Bluetooth ® settings of your device. The announcement “Connected” is
heard.
Note – Bluetooth® password
Some devices require a password in order to connect to another Bluetooth ®
device .
• If your device requests a password to connect to the product, enter 0000 .
Multi-point technology
This headset can connect to two Bluetooth® -enabled devices simultaneously
(multi-point) .
- First connect the first device to the headset.
- Then deactivate the Bluetooth® function on this device .
- Then connect the second device to the headset.
- Activate the Bluetooth® function on the first device again . The headset then connects to this device too .
Controls
Note
- Please be aware that your terminal device must support some functions if they are to be used .
- For more information, please refer to the operating instructions of your device .
7.1 Voice assistant function
Press and hold the MFB button (2) for around 1 second to initiate
communication with Siri or the Google Assistant.
Note – Siri
Siri is only available on suitable devices running iOS 5 (iPhone 4s or later)
or higher .
Note – Google Assistant
- The Google Assistant is only available on suitable devices running Android 5.0 or higher with Google Play Services, >1 .5 GB of free memory and a minimum screen resolution of 720P.
- The Google Assistant App must be available on your device and be set as the default voice assistant .
7.2 Hands-free function
It is possible to use the headset like a hands-free facility for your
device.
Note
The “Last number redial” function is only available for the device which was
paired first with the product in a multi-pairing situation .
7.3 Audio playback
7.4 Volume control
Technical data
Bluetooth® Headset
Bluetooth technology | Bluetooth®v5 .0 |
---|---|
Profiles supported | A2DP, AVRCP, HFP, SPP V1 .2 |
Frequency for Bluetooth ® transmissions | 2402 – 2480 MHz |
Range | < 10 m |
Rechargeable battery
Battery type | 3 .7 V Li polymer |
---|---|
Min. capacity | 100 mAh |
Power consumption | max .5V ****90 mA |
Charging Time | ~ 2 h |
Standby * | ~ 200 h |
Music playing * | ~ 6 h |
Call time * | ~ 7 h |
Weight | approx . 9 g |
Once fully charged
**** Care and maintenance
Only clean this product with a slightly damp, lint-free cloth and do not use aggressive cleaning agents .
Warranty disclaimer
Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes .
Service and Support
Please contact Hama Product Consulting if you have any questions about this
product .
Hotline: +49 9091 502-0 (German/English)
Further support information can be found here: www .hama .com
Declaration of Conformity
**** Hama GmbH & Co KG hereby declares that the radio equipment type [00184148] is in compliance with Directive 2014/53/EU . The full text of the EU declaration of conformity is available at the following Internet address: www.hama.com->00184148->Downloads.
Frequency band(s) | 2402 MHz – 2480 MHz |
---|---|
Maximum radio-frequency power transmitted | 2,5mW E .I .R .P . |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>