LEVEL RF-S800 Electronic Lock Installation Guide
- June 3, 2024
- Level
Table of Contents
LEVEL RF-S800 Electronic Lock
LEVEL Electronic Lock RF-S800
LEVEL Electronic Lock RF-S800
Drilling/Routing Template
(Please note drawings NOT to scale) American (squared 70mm Backset) lock case
and keep (option 1)
European (radial 6Omm Backset) lock case and keep (option 2)
Operating Guide
(Based on Level hotel lock management software user manual)
RFID Contactless
LEVEL Electronic Lock RF-S800 lock set can be operated via RFID (radio frequency identification) Specically MiFare 13.56Mhz key cards, key fobs, wristbands or even sticker tags. If the RFID credential is valid when presented to the front panel it will sound a”beep”and activate the motor so the lever can be rotated downwards and in turn retracts the latch. The lock will also display a blue LED. Invalid credentials will show a red LED and blink a number of times, it is important to count the quantity of red blinks as this helps to diagnose the reason why access was rejected.
Smartphone App using BLE
BLE stands for Bluetooth Low Energy, the lock set allows an App (iOS and
Android) to operate it. Ensure to be close by to the lock set, and that
Bluetooth is enabled on the smartphone. Press the unlock icon on screen within
the app, the red and blue LED will blink rapidly as the BLE key is being
validated, and then if valid the same blue LED will display and a beep will
sound.
Changes or modications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference ina residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not ocCur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- TEL: +86-757-83998771/83998772/83998773
- FAX: +86-757-83998770 Sales center:3 Floor, 67 bldg, Shidongxia Road, Foshan, China.
- E-mail : info@levellock.com
- WEB: www.levellock.com
- Production base: NO.I PingXi Industrial Park, PingZhou.Nan Hai, FoShan, China.
- QR CODE
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>