PERFORMANCE iN LIGHTING GUELL 4 LED Floodlight Instruction Manual
- June 4, 2024
- PERFORMANCE iN LIGHTING
Table of Contents
PERFORMANCE iN LIGHTING GUELL 4 LED Floodlight
IMPORTANT: ‐ In order to ensure optimum performance and safety, the luminaire must be correctly installed by qualified personnel, in compliance with the following instructions.
- Before performing any maintenance, always remove the voltage with a bipolar switch.
- The light source must be replaced only by qualified personnel or by the manufacturer of the luminaire.
- Any type of component maintenance can only be carried out by qualified personnel or by the manufacturer of the device.
- The following instructions must be kept in a safe place.
- Any misuse or any modification of the product not expressly authorised by PERFORMANCE iN LIGHTING S.p.A. is hazardous and makes the warranty nil and void..
- Any reproduction of the contents of this sheet without prior written consent of PERFORMANCE iN LIGHTING S.p.A. is prohibited.
SYMBOL
THIS PRODUCT CONTAINS A LIGHT SOURCES OF ENERGY EFFICIENCY CLASS:
| 5700K | 5000K | 4000K | 3000K | 2700K | |
|---|---|---|---|---|---|
| CRI 90 | – | – | – | – | – |
| CRI 80 | – | – | D | D | – |
| CRI 70 | – | – | – | – | – |
IMPORTANT NOTE:
Before performing any exchange please contact
ecodesignsupport.it@pil.lighting
for technical instructions.
OVERVIEW
INSTALLATION INSTRUCTIONS
- The luminaire is suitable for outdoor and indoor installation.
- The luminaire is suitable for installation on usually flammable surfaces.
- Provide the supply line with devices able to avoid over voltages (surge protection).
- Always verify that the structure is suitable to fix the luminaire. ELECTRICAL CONNECTION:
- Check the local voltage is same as indicated on the product label.
- For the electrical connection please respect the mark on the luminaire.
STEPS
STEP 1
STEP 2
STEP 3
STEP 4 STEP 5 STEP 6 STEP 7
STEP 8
STEP 9
Minimum distance between floodlight and illuminated surface.
Complete with supplementary SPD device with connection in series. The device protects against sudden surges from the mains up to a peak of 10kV / 5kA (according to standard EN 61643-11). At the end of its lifecycle, the device opens the circuit, protecting by also turning the equipment off (indicator off) With indicator off, replace the device. – For correct operation of the 10kV protection device, provide a fuse (max 16A) on the power supply line. Complete with supplementary SPD device with connection in series. The device protects against sudden surges from the mains up to a peak of 10kV / 5kA (according to standard EN 61643-11). At the end of its lifecycle, the device opens the circuit, protecting by also turning the equipment off (indicator off) With indicator off, replace the device. – For correct operation of the 10kV protection device, provide a fuse (max 16A) on the power supply line. Risk group RG1 at a distance of 6.44 m according to Standard IEC/TR 62778. WARNING: do not stare at the light source. Replace any damaged glass/diffusers or other damaged parts. Request the manufacturer to provide a spare part. Regularly clean the glass/diffuser diffusor of the spotlight with a soft cloth. – Do not use chemicals for cleaning the glass/diffuser diffusor of the luminaire. In respect and compliance to environmental standars at the end of life do not dispose of as standard waste, this must be taken to one of the authorised collection points.
PERFORMANCE iN LIGHTING S.p.A.
Viale del Lavoro 9/11 – 37030 Colognola ai Colli (VR) Italia Tel:
+39.045.61.59.211 – Fax: +39.045.61.59.292
www.performanceinlighting.com|
48072620 | ED.08 | 02 – 2022
References
- prohibited.DE
- This server is operated by UnoEuro Webhosting
- Api Market - zakupy spożywcze przez Internet! - Apimarket.pl - zakupy spożywcze przez Internet!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>