PERFORMANCE iN LIGHTING Guell Zero Outdoor and Indoor Compact Spotlight Instructions

: June 4, 2024
: PERFORMANCE iN LIGHTING

Table of Contents

PERFORMANCE iN LIGHTING Guell Zero Outdoor and Indoor Compact Spotlight
Safety Symbols
Dimensions
Installation instructions
CONNECTION ADVICE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

PERFORMANCE iN LIGHTING Guell Zero Outdoor and Indoor Compact Spotlight

IMPORTANT:

In order to ensure optimum performance and safety, the luminaire must be correctly installed by qualified personnel, in compliance with the following instructions.
Before performing any maintenance, always remove the voltage with a bipolar switch. ‐ The light source must be replaced only by qualified personnel or by the manufacturer of the luminaire. ‐ Any type of component maintenance can only be carried out by qualified personnel or by the manufacturer of the device. ‐ The following instructions must be kept in a safe place. ‐ Any misuse or any modification of the product not expressly authorized by PERFORMANCE iN LIGHTING S.p.A. is hazardous and makes the warranty nil and void.. ‐ Any reproduction of the contents of this sheet without the prior written consent of PERFORMANCE iN LIGHTING S.p.A. is prohibited.

Safety Symbols

THIS PRODUCT CONTAINS A LIGHT SOURCES OF ENERGY EFFICIENCY CLASS:

IMPORTANT NOTE:
Before performing any exchange please contact ecodesignsupport.it@pil.lighting
for technical instructions.

Dimensions

Installation instructions

CONNECTION ADVICE

WARNING : make sure that the connection is made with components that guarantee the IP rating.

OPTION A

OPTION B

CLASS I

The luminaire is suitable for outdoor and indoor installation. – The luminaire is suitable for installation on usually flammable surfaces. – Provide the supply line with devices able to avoid overvoltages (surge protection). – Always verify that the structure is suitable to fix the luminaire.

WARNING: The flexible cable on the outside of this fixture cannot be replaced; if the cable is damaged, the entire fixture must be scrapped. ELECTRICAL CONNECTION: Check the local voltage is the same as indicated on the product label.
For the electrical connection please respect the mark on the luminaire.

The minimum distance between floodlight and illuminated surface.
WARNING: do not stare at the light source.
Replace any damaged glass/diffusers or other damaged parts. Request the manufacturer to provide a spare part.
Regularly clean the glass/diffuser diffusor of the spotlight with a soft cloth. – Do not use chemicals for cleaning the glass/diffuser diffusor of the luminaire.
In respect and compliance to environmental standards at the end of life do not dispose of as standard waste, this must be taken to one of the authorized collection points.

PERFORMANCE iN LIGHTING S.p.A.
Viale del Lavoro 9/11 – 37030 Colognola ai Colli (VR) Italia Tel: +39.045.61.59.211 – Fax: +39.045.61.59.292
www.performanceinlighting.com