hama BP-17.4×7 LED Strip Profile Instruction Manual
- June 4, 2024
- Hama
Table of Contents
hama BP-17.4×7 LED Strip Profile
Description
Tools Required
Assembling
- LED strip assembly: Ensure that the strip is placed correctly (smoothly) in the surface of the profile without any bumps
- Opal cover assembly: ensure the surface of cover is flat after installation
- End cap assembly:
- Wires go through the hole of end cap
- End cap click-in to the profile
- Before placing/mounting the end cap push the wires of the LED strip through the hole of the endcap. Afterward, place the endcap onto the profile
- The potential risk of the end cap falling off from the profile after dissembling of the end cap,so please don’t take the end cap off after assembling
- Clip Spring
- Mounting clip position(1m)
- Mounting clip assembly(lm)
- Profile assembly(lm)
Signify
I.B.R.S. / C.C.R.I. Numero 10461
5600 VB Eindhoven, the Netherlands
OJ00S00-74454775
Signify Commercial UK Limited Unit 3, Guildford
Business Park, Guildford, Surrey, GU2 SXG, UK
Philips and the Philips Shield Emblem have registered trademarks of
Koninklijke Philips N.V. and are used under license
© 2022 Signify Holding
@ignify
3241 659 26511
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>