Ncyclebike UKC3 TFT LCD Display User Manual
- June 3, 2024
- Ncyclebike
Table of Contents
Ncyclebike UKC3 TFT LCD Display User Manual
Product Name
TFT LCD display; model: UKC3.
Supplier
TIANJIN UKRIVER SCIENCE & TECHNOLOGY CO.,LTD
Electrical Parameters
- 1.77 inch IPS screen
- 24V/36V/48/52V battery supply
- Rated power of instrument: 1W
- Off leakage current <1uA
- Working current supplied to controller: 100mA, Max output current to controller: 300mA
- Operating temperature: -20~70℃
- Storage temperature: -30~80℃
Dimensions & Material
ABS product shell, LCD transparent window is made of high strength Acrylic
which is imported, Product holder material is glass fiber mixed with nylon.
Features
- High-contrast 1.77 inch IPS colorful matrix screen.
- Speed display: Display real time speed.
- Kilometer/Mile: Can be set according to customers’ habits.
- Intelligent power indicator contains below: It can provide a stable power indication through the optimization algorithm. The power is not affected by the start-stop fluctuation of the motor. If the system supports battery communication, the accurate percentage of power will be displayed.
- Adjusting 5 levels backlight brightness: 1st level is the darkest, 5st is the lightest
- 9-level Assist: 3-level/5-level/6-level/9-level is optional.
- Mileage indicator: Odometer/Trip distance/Riding time.
- Error code indicator.
- Software upgraded: Software can be upgraded through UART.
- Speed measuring magnetic steel regulating function: The number of speed measuring magnetic steel can be set.
- Speed limited from 1-100Km/h.
- Current limited from 5-30A.
TFT screen instructions
- Speed display: Km/h or MPH.
- Battery display: Voltage data and display model is optional.
- Level display: 0-9 levels, P means 6Km/h.
- Mileage display: Display mileage accumulation.
Functional Description
Power On/Off
Press and hold button for 1 second, it can turn on/off the display. The Display will automatically shut down when there is no operate & ride for X minutes (X could be 0~9).
*If the display has been set power-on password, you need to input the right password when starting.
Assist level operating
Short press UP/DOWN button can change the assist level. Top assist level is
5,0 for neutral. Level quantities can be adjusted according to the customer’s
requirements.
The screen display of the PAS level adjust
Headlight/Display model change
Press and hold UP button for 1 second, the headlight will be open (controller
support is needed) and change the daytime/night model. Press and hold UP
button for 1 second again, lighting will be closed and change the display
model.
Walking mode (6km)
Pressing and holding DOWN button for 2 seconds can get into walking mode, then
the display will show P, when release the button, it will be out of the mode.
The display of the walking mode
*This feature needs to be supported by controller.
Information
Press button for 1 seconds can get into information menu, it will show
Odometer/Trip distance, and Riding time.
Information menu
MENU Parameter setting
In the state of power on, press the button twice (time interval must be within 0.3S), the system will enter the menu parameter setting state, in this state, users can set the parameters, press button twice again to quit setting state (time interval must be within 0.3S).
*Display will quit the menu automatically when there is no operation for 30 seconds, In the riding state (speed is more than 0), entering setting state is not allowed, when riding in the menu state (speed is not 0), it will quit menu setting state.in the advanced setup interface, when you press switch, it’s not able to quit menu.
Brightness
Press button to enter the setting menu, adjusting the brightness 1-5 by
pressing UP/DOWN button, 1 is the darkness, 5 is the brightness.
Adjusting the brightness interface
System
Press UP/DOWN button can change different function, entry into default by
pressing Button, press UP/DOWN button again will change content, pressing
button returns to previous menu.
Default and functions:
- Unit system Metric/Imperial
- Power system 24V/36V/48V/52V
- Power indicate Percent/Voltage
- Auto assist ON/OFF
- After finish setting, choose EXIT, returns to previous menu.
Auto off
Press UP/DOWN button to change the auto power off time, from 1 to 9, the
number represent time (minutes) to shutdown, default value is 5 minutes.
Wheel
Press UP/DOWN can change the wheel setting, optional wheel diameter is
16/18/20/22 /24/26/27/27.5/28/29/30/31/32/34 inch, 51cm~255cm represent wheel
circumference (this needs protocol support).
Advance setting
Press button to enter advance setting menu, adjusting password by pressing
UP/DOWM button, if the password is right, you can enter the Sub menu of
advance setting, password has 4 numbers, default password is ‘1801’.
Defaults and functions:
- Speed limit **km/h
- Current limit **A
- Assist levels 3/5/9/6: 3 means 3 levels; 5 means 5 levels; 9 means 9 levels; 6 means 9 levels.
- Poles in motor 1~15
- Throttle 6km Y/N
- Assist Poles 3~15
- Throttle Level Y/N
- Clockwise Y/N
After finish setting, choose Exit, Previous Menu
Factory setting
Enter Factory setting menu, set YES will restore all parameter to factory
settings.
Password
Press button to enter the password setting menu. Press UP/DOWN button to
adjust the password number and get into setting menu, choose Start Password
and choose Turn ON/Turn OFF, it means open/close password; choose Reset the
Password menu, it will get into the new password setting menu. default
password is ‘0000’.
Exit
Select Exit and press to return to the main menu.
Assembly instructions
Please pay attention to the screw’s torque value, damages caused by excessive
torque are not within the scope of the warranty.
