IDEAL WAREHOUSE Safe Bump Yellow Forklift Protector Instruction Manual
- June 9, 2024
- IDEAL WAREHOUSE
Table of Contents
IDEAL WAREHOUSE Safe Bump Yellow Forklift Protector
Safe-Bump Product Information
The Safe-Bump is a bumper designed to protect walls, corners, and other surfaces from damage caused by forklifts and other heavy equipment. It comes with magnets and brackets for easy attachment to any metal surface, as well as an adhesion promoter and two-way tape for more permanent installation. The bumper is adjustable in width and can be bent around corners.
Safe-Bump Product Usage Instructions
- To attach the Safe-Bump using magnets, simply place the bumper on the desired metal surface and use the nuts and bolts to secure the magnets and brackets in place.
- If using an adhesion promoter and two-way tape, clean both surfaces with alcohol and let dry. Apply the promoter to both the Safe-Bump and the surface where it will be placed, let dry, then apply the two-way tape. If the Safe-Bump is placed on a vertical surface, apply pressure and secure with shipping tape. Do not pull on the bumper for at least 12 hours to allow the tape to cure.
- If using the Safe-Bump on forks, install the brackets provided to keep the bumper securely in place. Tighten nuts to keep bracket in place.
- The Safe-Bump can be adjusted in width from 3.2 to 5.5 inches to fit a variety of surfaces.
- For extra security, use both magnets and two-way tape to secure the Safe-Bump around corners or when moving sideways.
Following these usage instructions will ensure proper installation and effective protection of walls, corners, and other surfaces from forklift and heavy equipment damage.
Installation Instructions
Magnets: These are used to attach to any metal surface.
Adhesion Promoter: This promoter will dramatically increase the adhesion of both the bumper and the surface you are applying the two-tape to. First, clean both the surface of the Safe-Bump and surface with alcohol. Let it dry. Apply the Adhesion Promoter to both the Safe- Bump surface and the area where the bumper will be placed. Let dry. Then apply the two-way tape. If the Safe- Bump is placed on a vertical surface apply pressure and secure with shipping tape. Please do not pull on the bumper for at least 12 hours so the two way tape has time to cure.
Nuts and Bolts: They hold magnet and bracket in place.
Bracket: To be installed when used on forks. Sideshifting will cause the bumper to slip. The bracket will keep the bumper securely in place. Tighten nuts to keep bracket in place.
Two-Way Tape: The tape is used when you want the bumper to be permanent. It prevents the bumper from.
- Use magnet and brackets when used as fork bumpers.
- The bracket keeps the bumper from moving sideways.
- Safe Bump can bend around corners. Use both magnet and tape to secure.
- Use magnet and two-way tape when used as a counterweight bumper.
- Brackets can adjust from 3.2” to 5.5” in width.
Ideal Warehouse Innovations , Inc.
Phone: 1-866.828.6737
www.idealwarehouse.com
info@idealwarehouse.com
References
- Warehouse & Loading Dock Safety Products | Ideal Warehouse Innovations - Loading Dock Bumper Pads, Truck Dock Bumpers, Semi Trailer Jack Stands, Warehouse Guardrail, Column Protectors, Warehouse Air Purifiers, Industrial Air Filtration Systems and Push Bac
- Warehouse & Loading Dock Safety Products | Ideal Warehouse Innovations - Loading Dock Bumper Pads, Truck Dock Bumpers, Semi Trailer Jack Stands, Warehouse Guardrail, Column Protectors, Warehouse Air Purifiers, Industrial Air Filtration Systems and Push Bac
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>