TECMIX TMX TBS 550 Automatic Screwdriver Instruction Manual
- June 3, 2024
- TECMIX
Table of Contents
TECMIX TMX TBS 550 Automatic Screwdriver Instruction Manual
WARNING:
For your personal safety. READ and UNDERSTAND before using. Save these instructions for future reference.
TECHNICAL DATA
| TECHNICAL DATA | TMX TBS 550 |
|---|---|
| Input power | 550 W |
| Mains voltage | 230V/50Hz |
| Number of gears | 1 |
| Idle speed (rpm) | 0-5500 |
| Degree of protection / protection class | double insulation / II |
| Certification | CE |
| Vibration level hand/arm | 2.483 m/s² |
| Sound pressure level | 85.7 dB (A) |
| Sound power level | 99.7 dB (A) |
| Net weight | 1.8 kg |
Contents of the box
Instructions
Unlocking of the loading system of the Screwstrip
Engaging the screw Strip in the notch
Press the red latch to release the mechanism
Relock the lever – the machine is ready to operate
Stop adjustment screw. This one allows you to set your machine depending on
the screw length
The TMX TBS 550 drywall screwdriver allows fast rythm, screws recharge after
each screw, no manipulation required.
If your first screw gives the following cases, set the ring to drive more or less the screw at the next screwing
Adjust like this:
Adjust like this:
Adjust like this:
Switching from automatic to manual mode
Remove the head by simply pulling it, same for the screwdriver
Clip the screwdriver bit holder and the mandrel
CE DECLARATION OF CONFORMITY
B ERG TECTOOL GMBH, Cologne, declares under its full responsibility that the
power tool is in conformity with directives of the European Parliament
Directive 98/37/EC – 2006/42/EC, Directive 2006/95/EC and Directive
2004/108/EC and complies with the requirements of the following standards
EN 60745-1, EN 55014-1, EN 55014-2, EN 61000-3-2, EN 61000-3-3.
Fabian Berg
BERG TECTOOL GmbH
Hermann-Heinrich-Gossen-Str. 3
50858 Köln
Germany
Exploded View
| Pos. | Spare Part | Art. – No. | TMX TBS 550 |
|---|---|---|---|
| 1 | Bit Holder Magnetic | 17200 | 1 |
| 2 | Length Adjust Cover | 17201 | 1 |
| 3 | Wool Felt Ring | 17202 | 1 |
| 4 | Catcher | 17203 | 1 |
| 5 | Thread Mount | 17204 | 1 |
| 6 | Screw | 17205 | 1 |
| 7 | Gear Box | 17206 | 1 |
| 8 | Needle Bearing | 17207 | 1 |
| 9 | Spindle | 17208 | 1 |
| 10 | Needle Bearing | 17209 | 1 |
| 11 | Washer | 17210 | 1 |
| 12 | Spring | 17211 | 1 |
| 13 | Shaft | 17212 | 1 |
| 14 | Gear | 17213 | 1 |
| 15 | Needle Bearing | 17214 | 1 |
| 16 | Needle Bearing | 17215 | 1 |
| 17 | Oil Baffle | 17216 | 1 |
| 18 | Middle Cover | 17217 | 1 |
| 19 | Motor Housing Right | 17218 | 1 |
| 20 | Screw | 17219 | 4 |
| 21 | Ball Bearing | 17220 | 1 |
| 22 | Armature 230V | 17221 | 1 |
| 23 | Carbon Brush | 17222 | 2 |
| 24 | Brush Holder | 17223 | 2 |
| 25 | Spring | 17224 | 2 |
| 26 | Ball Bearing | 17225 | 1 |
| 27 | Bearing Bush | 17226 | 1 |
| 28 | Fan Guide | 17227 | 1 |
| 29 | Stator 230V | 17228 | 1 |
| 30 | Motor Housing Left | 17229 | 1 |
| 31 | Rating Label | 17230 | 1 |
| 32 | Switch | 17231 | 1 |
| 33 | Capacitor 230V | 17232 | 1 |
| 34 | Screw | 17233 | 2 |
| 35 | Cord Clamp | 17234 | 1 |
| 36 | Cord Armor | 17235 | 1 |
| 37 | Supply Cord 230V | 17236 | 1 |
| 38 | Brand Label | 17237 | 1 |
| 39 | Length Adjust Frame | 17238 | 1 |
| 40 | Support Housing Left | 17239 | 1 |
| 41 | Screw | 17240 | 1 |
| 42 | Belt Driver Fork | 17241 | 1 |
| 43 | Length Adjust Button | 17242 | 1 |
| 44 | Length Lock | 17243 | 1 |
| 45 | Spring | 17244 | 1 |
| 46 | Support Limit | 17245 | 1 |
| 47 | Screw | 17246 | 2 |
| 48 | Support Housing Right | 17247 | 1 |
| 49 | Needle Bearing | 17248 | 2 |
| 50 | Belt Driver Slider | 17249 | 1 |
| 51 | O-Ring | 17250 | 2 |
| 52 | Support Wheel | 17251 | 2 |
| 53 | Shaft | 17252 | 1 |
| 54 | Tube | 17253 | 1 |
| 55 | Spring | 17254 | 1 |
| 56 | Spring Lock | 17255 | 1 |
| 57 | Spring | 17256 | 1 |
| 58 | Screw | 17257 | 2 |
| 59 | Guide Rail | 17258 | 2 |
| 60 | Screw | 17259 | 4 |
| 61 | Housing Right | 17260 | 1 |
| 62 | Screw | 17261 | 2 |
| 63 | Deepth Location Ring | 17262 | 1 |
| 64 | Check Ring | 17263 | 1 |
| 65 | Connecting Support | 17264 | 1 |
| 66 | Ball | 17265 | 4 |
| 67 | Deepth Adjust Ring | 17266 | 1 |
| 68 | Reed | 17267 | 1 |
| 69 | Housing Left | 17268 | 1 |
| 70 | Brand Label | 17269 | 1 |
| 71 | Bit PH2 | 17270 | 1 |
BERG TECTOOL GmbH
Hermann-Heinrich-Gossen-Str. 3
50858 Köln
Germany
fon: +49 (0)221 964 966 0
fax: +49 (0)221 964 966 22
www.bergtectool.com
bt@bergtectool.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>