HINOY H4K WiFi Action Camera User Manual
- June 3, 2024
- HINOY
Table of Contents
HINOY H4K WiFi Action Camera
WELCOME TO A MORE PRODUCTIVE YOU!
To enhance our hunting experience with our family in the wilderness! I will
use it for my hunting videos. Great for preserving your hunting memories. It’s
also nice to see where you cast before you start tracking! A video maker for
hunting enthusiasts.
Cautions
-
This is a 4K 30FPS hunting action camera. It is normal for the housing to emit heat during use.
Please peel off the transparent protective films on the lens and screen of the camera before using it. Please protect the lens and screen of the camera well after use.
Protect the camera from falling and dropping, -
Keep the camera away from strong magnetic interference objects such as electrical machines to avoid strong radio waves that may damage the product and affect the sound or picture quality.
-
In case of overheating or unwanted smoke, unplug the product from the wall outlet immediately to avoid dangerous fire.
-
Keep it away from children during charging. Keep it in a cool, dry and dust-free place. Do not modify the camera in any way, If the camera has been removed, the warranty will be void,
- Press and hold the power button for three seconds to turn the unit on and off.
- After power on, press the power button briefly to start/stop recording.
- Press the power button twice briefly within two seconds to turn WiFi on/off.
Overview
V35AX Technical Specifications
| Master | iCatch V35AX |
|---|---|
| Sensor | IMX335 |
Video resolution
Video encoding
Audio coding Video file format
| 4k@30fps (3840×2160)
2.7K@60fps (2704×1520)
2.7K@30fps (2704×1520)
1080P@60fps(1920×1080)
1080P@301ps(1920×1080)
720P@120fps(1280×720)
720P@60fps(1280×720) H.264
PCM
MOV
| 20M(5120×3840)
| 16M(4640×3480)
Photo resolution| 14M(4320×3240)
| 10M(3648X2736)
| 8M(3264×2448)
Image format| JPG
WIFI| RTL81 89FTV compatible IEEE 802.11b/g/n
EIS| support
( 12c.ps\240fps Resolution not supported)
Time-lapse video| support
Slow motion video| support
Fast motion video| support
---|---
Loop recording| support
Photo mode
Time lapse
| single shot, timer shot, continuous shot
support
Long exposure| supports up to 60 seconds tong exposure
Underwater mode| support
Distortion| support
Digital zoom| support 4x
Screen protecUon| support 1 minute, 3 minutes, 5 minutes no operation auto
screen off
Language
| English/Simplified Chinese/Traditional Chlnese/French/Spanlshlltaian/Portuguese/
German/Rus sian/Japanese
APP| iSmart DV2
Card| Micro SDHC Card, U3, maximum support:1 28GB
USB interface| B2.0, support MSDC models. (Equivalent to U-dlsk mode)
PC camera mode twebcam mooet
Microphone Power supply| built-In one
5V/0.5A
System Requirements| Windows 2000/XPNlsta/Wlndows 7,
MAC OS x 10.3.6 or hinher
There are 2 ways To use
A:Use without WIA:
- Press and hold the power button for three seconds to power on/off the device.
- Press the power button briefly to start/stop recording after power on.
- Press the power button twice briefly within two seconds to tum WiFi on/off.
B: Connect to a WIFI device to use it: APP:
[iSmart DV2) CONNECT TO THE iSmart DV2 APP.
- Downloadthe liSmart DV2) App from Apple App Store or Google Play to your mobile device.
- Turn on the camera, the WIFI signal will be turned on automatically.
- Turn on the Wi-Fi settings of your mobile device, connect to the Wi-Fi SSID
- Enter the password: “1234567890”.
- Open the app [iSmart DV2J on your smartphone or tablet.
- Tap “Add a new camera”.
- Tap “Wi-Fi Connect”.
- All functions of DV can be used normally when you are connected to a WIFI device.
CONNECT TO THE iSmart DV APP
- Download (iSmart DV2) App to your mobile device from the Apple App Store or Google Play;
- Turn on the camera, WIFI signal is automatically turned on
- Turn on Wi-Fi Setting of your mobile device, connect to the Wi-Fi
- Enter the password: “1234567890”
- Open the app (iSmart DV2) on your smart phone or tablet
- Tap “Add new camera”
- Tap “Wi-Fi Connect”
Note: You want to turn off Wi-Fi Short press the power button twice within two seconds to turn off WiFi
DOWNLOADING AND SHARE YOUR CONTENT
- Open the “iSmart DV2″app.
- Tap “Albums icon”at the left comer of the bottom screen.
- Select files in”Photos”or ‘Videos” at the top of the screen.
- Tap “Download icon” at the right comer of the bottom screen to download
- Save or Share your content.
The iSmart DV App is compatible with smart phone and tablet listed below:
For Apple 10S
- iPhone6(plus),6s(plus),7 (above IOS12)
- iPhone Air & Mini (above IOS12)
For Android
Android 4x Quad-Core devices (above Android 7.0)
CHARGING THE BATTERY
- Connect the camera to USB power Supply
- The charging status light remains ON while the battery is charging.
- The charging status light wl tun OFF when the batteries fully charged,
- Charging time: 4-hours Working hours 4-5 hours
- Please make sure the camera is shuttied down while charging.
- Remove the battery before using as a dash camera
MAXIMIZING BATTERY LIFE
F the battery reaches 0% duńng recording. the camera saves the file and tums
off To maimize battery life, follaw these guideines whenever possibler
- Tum aff wireless connectons
- Record video at iower frame rates and resolutions
Wi-Fi APP
The Wi-Fi App lets you control your camera remotely using a smart phone or tablet. Features include full camera control.live preview, playback and sharing of selected content and more.
Notes
-
The camera Wi-Fi is a
point-to-point signal source that supports only one phone connection at a time, not two or more phones.
If two phones simultaneously turn on Wi-Fi, one phone is successfully connected to the camera’s Wi-Fi, while the other phone no longer connects to the camera or even interferes with the transmission of the signal. -
The Wi-Fi bandwidthof the camera is relatively na,row, and the signal is affected by distance, other signals, electromagnetic waves, obstacles, and other factors. A signal delay of 2 to 5 seconds is normal. The Wi-Fi distance is about 5 to 15 meters.
-
When the phone and camera connect via Wi-Fi, the camera’s performance increases. The temperature of the camera increases rapidly, and the consumption ofthe camera batteries also increases – a normal phenomenon.
STORAGE/MICRO CARDS
Use brand name memory cards that meet following requirements.We strongly
recommend to use the branded memory cards purchased from regular channels for
maximum reliability and stability during recording and high vibration
activities.
- micro SD, micro SDHC, or micro SDXC
- UHS-111 rating at least for 4K Video resolution
- Capacity up to 128GB (FAT32)
Notes
- Please format the micro SD,micro SDHC and micro SDXC memory card before using it in the camera.
- Please insert the memory card correctly. Otherwise, the card slot may be damaged.
- To keep your micro SD card in good condition, you should reformat ii regularly.
- The micro SD card stops recording when the storage capacity of a file exceeds 4 GB and starts recording a new file.
- Reformatting will erase all your content, so you should unload your photos and videos beforehand.
- Do not place your Micro SD card near strong magnetic objects to avoid data errors or loss.
WARNING
- Do not drop, disassemble, open, crush, bend, deform, puncture, shred, bum or paint the camera or battery.
- Do not insert foreign objects into the battery opening of the camera.
- Do not use the camera or battery if they are damaged, such as if they have cracks or holes, or have been damaged by water. Disassembling or puncturing the battery may cause an explosion or fire.
- Since there are many types of phones on the market and the phone system is constantly being updated, the iSmart DV app needs time to sync timely updates if the iSmart
- DV App is not compatible with your phone, please let us know the model and system version of your phone, we will sync your phone promptly,
- If you find your phone can not connect the camera’s WIFI, please confirm that your connection is correct, if the iSmart
- If you find that your phone can not connect to the camera
- WIFI can not connect, please check if your connection is correct, if so, and you still can not connect. Please delete the Wi-Fi
- SSID of the camera in your phone’s Wi-Fi settings and connect again. If necessary, you can also delete the iSmart DV app from your phone and download and install it again.
Connector: 2.5mm
SNR: > 60dB
Cable length: approx. 1 M/3,28 ft
Communication: Wired
Operating temperature range(C ): -10~+55
If you have any questions, please feel free to contact us: (
support@hinoy.net)
Picatinny Rail bracket
Designed to mount under Short Scope Crossbows but can attach to any picatinny
Rail.
EFFICIENT MOUNTING Stabilizer Mount
Attach your camera to your bow in a snap, It’s a simple process. Just attach
it and you are done!
EASY AS PIE: The attachment is done with the push of a button. No
difficult instruction or anything strenuous.
Hunter Universal Bracket:
The red light stays on during charging and turns off when the battery is 100%
charged
The camera can be connected to the computer to read videos and photos
Contact Us
- Get in touch with us through Amazon Buyer-Seller Messaging.
- Email us at: support@hinoy.net
- Scan the QR code and follow HINOY’s official Facebook page for an Instant onllne chat to resolve customer service issues and extend the product warranty period by six months.
Scan to connect with us
FCC Warning
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>