TurboTorch PLF-A5 Air Acetylene Extremetm Standard Torch Kits Owner’s Manual
- September 29, 2024
- TurboTorch
Table of Contents
TurboTorch PLF-A5 Air Acetylene Extremetm Standard Torch Kits
Specifications
- Product Name: Air Acetylene EXTREMETM STANDARD
- Torch Handle Compatibility: PLF-A5 or G-4
- Color Coding: Red for Acetylene
EXTREME STANDARD TIPS
A full series of manual lighting tips can be used with any Air Acetylene torch handle (PLF-A5 or G-4). Add range to your torch kit with economical tips that also feature a removable orifice screw.
Product Usage Instructions
Torch Tip Selection
Choose the appropriate tip size based on the required gas flow and the type of soldering or brazing work to be done. Refer to the table for tip sizes, gas flow rates, soft soldering ranges, silver brazing ranges, and replacement orifice models.
Tip Installation
Ensure the torch handle is securely attached to the tip. Make sure the orifice screw is properly installed and tightened for safe and efficient operation.
Gas Flow Adjustment
Adjust the gas flow according to the specific job requirements. Refer to the gas flow rates provided in the specifications for guidance.
Professional Tip Pack
If using the Professional Tip Pack (0386-0577), assemble the torch with the selected tip (A-8, A-5, or A-2), use the included striker for ignition, and utilize the 8×12 Torch Shield made with PyroSilTM for added protection.
U.S. Customer Care : 800-238-0282 / FAX 800-535-0557
FAQs
Q: Can I use any tip with the Air Acetylene torch handle?
A: Yes, a full series of manual lighting tips can be used with any Air
Acetylene torch handle compatible with PLF-A5 or G-4.
Q: What is the purpose of color-coded O rings on the tips?
A: The color-coded O rings help identify the gas type for which the tip is
suitable. In this case, red O rings indicate compatibility with Acetylene gas.
Q: How do I contact Customer Care for assistance?
A: For U.S. Customer Care, you can call
800-238-0282 or fax at
800-535-0557 for any product-related
queries or support.