Tian Hai Test MO-01 Makeup Organizer User Guide
- June 16, 2024
- Tian Hai Test
Table of Contents
Tian Hai Test MO-01 Makeup Organizer
Shenzhen Tian Hai Test Technology Co.,Ltd
- Report number: TH2303023-C01-R01
- Product name: Cosmetics storage box
- Model : MO-01
- Test categories: Commission test
- Applicant :
- Date of issue: 2023-03-07
Shenzhen Tian Hai Test Technology Co.,Ltd.
- Address: S4F, A3 BLDG, The Silicon Valley Power intelligent terminal industrial park,Guanlan street, Longhua district, Shenzhen
- TEL: (0755)86615100
- WEBSITE : www.tianhaitest.com
- Repo1t No.: TH2303023-C0I-R0l
- FAX: (0755)86615105
- E-mail: th@tianhaitest.com
| Product name | Cosmetics storage box | Trademark | I |
|---|---|---|---|
| Model | MO-01 | ||
| Rating |
\
Test categories| Commission test| Sample quantity| 2
Sample received| 2023-03-03| Sample status| Good condition;
No1mal work
Test date| ,, 2023-03-06 to 2023-03-07 ·,·
‘<
Applicant|
Address| Xinqiao Street, Baoan District, Shenzhen City, China
Manufacturer|
Address| Baoan District, Shenzhen City, China
Test item| See the following page for detailed test items
Test standards| As per client’s requirements
Test verdict|
The results of the tested items comply with the “‘client’s requirements.| ·
|
Tested by: Eric Tao Signature:
2023-03-07
Reviewed by: Fan Yang Signature:
2023-03-07
Approved by: Prince Huang Signature: __ 2023-03-07
Repo1t No.: TH2303023-CO I-RO l
TEST REPORT
Test item: Drop test
-
Test sample:
-
Samplename: Cosmetics storage box
-
Sample model:MO-01
-
Sample description: Before the test, the appearance of the sample is intact, without any defects and deformation.
-
Sample number: 1 #( assembled),2#(unassembled).
-
Test standard:
As per client’s requirements. -
Test requirement:
After test,the test sample shall show no obvious change in appearance,without any defects or deformation. -
Test environment condition:
-
The environment temperature:22. 9°C;
-
The environmental humidity:65%R.H.
-
Test equipment:
| EQNo. | EQname | Parameter | MFD & Model | Calibration |
|---|---|---|---|---|
| Last time | Next time | |||
| TH-SE-122 < | Single-arm drop tester | 0.6m-1.5m | Guangzhou Grui Testing | |
| Equipment Co., LTD/GR-SCX02 | 2022-11-14 | 2023-11-13 | ||
| TH-SE-019 | T & H Recorder | 1s.30°c, 40-80%RH | KTJ/TA218 | 2022-03-14 |
2023-03-13
Test condition:
| Drop height | 1.5m |
|---|---|
| Drop mode | Free fall |
| Falling surface and drop times |
- Bottom side,3 times Back side,3 times Long side,3 times Wide side,3 times
- Four corners on bottom side,1 time each comer
Test sample| 1#,2#
Test photos:
Sample 1#
Sample 2#
-
Test result:
After test, the test sample(! #,2#) show no obvious change in appearance, and without any defects or deformation. -
Test verdict: Pass.
SAMPLE PHOTOS
l#(assembled)
2#(unassembled)
Report statement
- The report is invalid without the “Special seal for Testing Rep01t” of the Department.
- The duplicated rep01t is invalid without re-stamping the “special seal for Test Report” of our company.
- The repo1t is invalid without the signature of the chief inspector, auditor and approver.
- The repo1t is invalid if it is altered.
- If there is any objection to the test results of supervision type, it may, within 15 days from the date of receiving the test results, submit a written application for retest to the administrative department that assigned the task of random inspection. If there is any objection to the test results of entrust other than supervision type, it may submit to the Department (Tel: 0755-86615100, fax: 0755-86615105, E-mail: ea@tianhaitest.com ) proposed. If no objection is raised within the time limit, the test result shall be deemed to be admitted.
- We are only responsible for the untested testing of samples sent by customers.
- If there is no special explanation, the relevant inf01mation of entrusting unit, production unit and sample has not been confirmed by our company.
- This repo1t does not make any judgment on legal disputes.
- The data results in this repo1t are only for the purposes of scientific research, teaching, enterprise internal quality control, enterprise product research and development.
- “Judged” as “P” in the repo1t means the detection conclusion is “qualified”; “F” stands for “unqualified” test conclusion; “NIA” means that the provision does not apply or will not proceed; “N.T” means the clause is “not tested”.
Tel: +86-755-86615 I 00 Fax: +86-755-86615105 http://www.tianhaitest.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>