Hurtownia GSM M33 Folding Magnetic Wireless Charging Stand User Manual
- September 28, 2024
- Hurtownia GSM
Table of Contents
M33 Folding Magnetic Wireless Charging Stand
“`html
Product Information:
Specifications:
- Magnetic Wireless Charging Stand Model: M33
- USB-C Input: 9V 2A
- Phone output: 15W Max
- Earphone output: 5W Max
Compatibility:
– (Magnetic)iPhone 15 Pro Max/15 Pro/15 Plus/15/14 Pro Max/14
Pro/14 Plus/14/13 Pro Max/13 Pro/13/13 mini/12 Pro Max/12 Pro/12/12
mini
– (Magnetic)AirPods 3/AirPods Pro 2/AirPods Pro
– Compatible with other wireless charging phones that support QI
protocol
– Please use a magnetic case to charge your phone
Product Usage Instructions:
-
Only use certified QC 3.0/PD charging wall adapter to charge
the device, do not plug into computer USB port or any other
non-certified USB port. -
Place your Qi-enabled device accurately into the wireless
charging area when charging. -
A QC 3.0/PD adapter is required when charging mobile phones for
quick charging. -
Make sure to disconnect the device from power when
cleaning. -
It is normal and safe to hear a humming noise when very close
to the charger. It means that this wireless charger is adjusting
its temperature to achieve a more efficient charging speed. -
If your device cannot be fully charged, this may be due to high
environmental temperature. Please recharge after the temperature is
lowered. Our charger has temperature control to safeguard your
device when charging.
Important Safety Instructions:
Before using the unit, please read the user manual
carefully.
FCC Warning:
A01 2024.8.21
FAQ:
Q: Can I use any adapter to charge the device?
A: It is suggested to use a 9V 2A adapter. Only use certified QC
3.0/PD charging wall adapter to charge the device for optimal
performance.
Q: What should I do if my device is not fully charged?
A: If your device cannot be fully charged, this may be due to
high environmental temperature. Please recharge after the
temperature is lowered.
“`
(M33
Folding Magnetic Wireless Charging Stand
USER MANUAL
Preface:
Dear customers, thank you for purchasing our products. In order to understand
the product further. Please read this manual carefully before use. We wish you
a pleasant experience!
68mm
9.5mm
Specifications
Magnetic Wireless Charging Stand Model: M33 USB-C Input: 9V 2A Phone output:
15W Max Earphone output: 5W Max
Magnetic
119mm 68
lt is suggested to use 9V 2A adapter.
USB-C
Compatibility:
(Magnetic)iPhone 15 Pro Max/15 Pro/15 Plus/15/ 14 Pro Max/14 Pro/14 Plus/14/13
Pro Max/13 Pro/ 13/13 mini/12 Pro Max/12 Pro/12/12 mini (Magnetic)AirPods
3/AirPods Pro 2/AirPods Pro
Compatible with other wireless charging phones that support QI protocol Please
use a magnetic case to charge your phone
1. Only use certified QC 3.0/PD charging wall adapter to charge the device,
do not plug into computer USB port or any other non-certified USB port.
2. Place your Qi-enabled device accurately into wireless charging area when
charging.
3. A QC 3.0/PD adapter is required when charging mobile phones can be quickly
charged
4. Make sure to disconnect the device from power when cleaning.
5. It is normal and safe to hear a humming noise when very close to the
charger. lt means that this wireless charger is adjusting its temperature to
achieve a more efficient charging speed
6. lf your device can not be fully charged, this may due to high
environmental temperature, please recharge after the temperature is lowered.
Our charger has temperature control to safeguard your device when charging.
IMPORTANT SAFETY INSTRUCTIONS Before using the unit, please read the user manual carefully
- Do not store device in high-temperature environment, including heat caused by intense sunlight or other forms of heat. Do not place device in fire or other excessively hot environments. Exposure to fire or temperature above 212°F(100C) may cause explosion. Do not use the wireless charger in excess of its output rating. Overloading outputs above rating may result in a risk of fire or injury to persons. Do not expose the wireless charger to rain or snow. Do not modify, repair or disassemble the unity, if so, please contact the manufacturer. Switch off the wireless charger when not in use. The wireless charger will automatically switch off when disconnected from its wall charger.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:(1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment. This equipment has
been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct t he interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC RF exposure statement: The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance between 20cm the radiator your body.
A01
2024.8.21
128 6595mm
(RoHS