DURACELL M100 Portable Charging Hub User Manual
- September 29, 2024
- Duracell
Table of Contents
M100
PORTABLE CHARGING HUB
USER MANUAL
INCLUDED IN THE PACKAGE
1. M100 PORTABLE CHARGING HUB
2. 60W M-DOCK CHARGING DOCK + WALL CHARGER
CHARGING YOUR CHARGING HUB
There are two ways to power the unit:
1. M-Dock Charging
-
CHARGING DOCK
Charges M100 in 3 hours -
60W DOCKING STATION WITH WALL CHARGER
Wall Charger Included
2. USB-C Charging
- USB-C IN/OUT PORT: 36W MAX PD CHARGING INPUT
USB-C Charger Not Included
USING YOUR PORTABLE CHARGING HUB
TURNING ON/OFF DEVICE
Turning On Device
Turning Off Device
CHARGING DEVICES
USB and Wireless Charging
Auto Detecting Ports While Charging
(All Ports Will Function While Device Is Being Charged Via USB-C In/Out or
M-Dock)
TILTABLE LID
- 15W wireless charger
- 5W wireless charger
BATTERY LEVEL INDICATOR
Battery Level
Battery 0%. Must Recharge.
- Flashing
BATTERY LEVEL STATUS LOGIC (5 LED)
Display Battery Level Indicator (%)| Idle State
(LED will dim down after 30s)| During Charging| During Discharging
---|---|---|---
0-20
| LED 1 ON| LED 1-5 blinking rolling from 1 to 5| LED 1 blinking
20-40
| LED 1-2 ON| LED 1 always ON. LED 2- 5 blinking from 2 to 5| LED 1 always ON.
LED 2 blinking
40-60
| LED 1-3 ON| LED 1-2 always ON. LED 3- 5 blinking from 3 to 5| LED 1-2 always
ON.
LED 3 blinking
60-80
| LED 1-4 ON| LED 1-3 always ON. LED 4- 5 blinking from 4 to 5| LED 1-3 always
ON.
LED 4 blinking
80-<100
| All LED On| LED 1-4 always ON. LED 5 blinking| LED 1-4 always ON.
LED 5 blinking
100
| All LED On| All LED On| LED 1-4 always ON.
LED 5 blinking
STORAGE AND MAINTENANCE
- Please keep the unit in a cool and well-ventilated environment, away from any source of water, heat or flammable gases.
- For long-term storage, please recharge the unit every 3-6 months to make sure it’s always above 80% SOC (State of Charge).
DISPOSAL AND RECYCLING
Recycle the unit responsibly and according to local, state, and national regulations applicable to lithium-ion rechargeable batteries.
TROUBLESHOOTING
PROBLEM | SOLUTION |
---|---|
Unit is not recharging. | Make sure the M-Dock is properly connected to a |
working AC receptacle. Try another AC receptacle if not working
Make sure the contacts at the bottom of the unit and at the top of the M-Dock
are clean and free from foreign objects.
If the M- Dock contacts are damaged, contact Duracell customer service.
Make sure the M100 is within the operating temperature range. If the M100 is too cold or too hot, it will not charge.
M100 is not charging or powering my device.| Make sure the M100 is powered on.
If the Battery Level indicator is off, press the power button to turn the unit
on.
If the battery level is too low, the left LED will blink rapidly. In this
case, the M100 must be recharged before use.
M100 is not charging or powering my devices and the top 4 LEDs blinking.
Flashing
| This occurs when the M100 has detected it is outside of its operating temperature range.
If too hot, bring the M100 to a cooler location, and allow it to return to normal operating temperature.
If too cold, bring the M100 to a warmer location and allow the M100 to return to normal operating temperature.
Left LED is blinking.
Flashing
| Low Battery and battery under voltage shut down : When the battery capacity is low, the left LED will blink fast. Place the M100 on the M-Dock and allow it to charge.
If you are still experiencing problems with your unit, please visit www.duracell.com or call Duracell Consumer Relations at800-551-2355.
FREQUENTLY ASKED QUESTIONS
-
What battery does my M100 use?
It uses high-performance lithium-ion cells. -
What devices can my M100 power?
With a total max of 92W continuous power, the M100 can power a wide range of portable electronic devices and Laptops. -
How long will my M100 keep my devices running?
That will depend on the power consumption of each connected device. The Battery Level indicator will show the remaining state of charge in the M100. -
How to store my M100?
Before storing, make sure to turn off the M100 first and then store it in a dry, well ventilated place at room temperature (42-85°F). Do not place it near water sources. For long-term storage, recharge every 3-6 months to ensure the battery is always above 80% to protect the battery life. -
Can I recharge my M100 while using it?
Yes, the M100 can be charged and used at the same time, but it will extend the recharge time. -
Can my M100 be used as an Uninterrupted Power Supply (UPS)?
No, the M100 is not designed to be used as a UPS and has only DC power outputs. -
Can I bring my M100 on a plane?
Check with the airline.
WARRANTY INFORMATION
Duracell covers a 24-month limited warranty from the date of purchase. Keep a copy of your purchase receipt as proof of purchase. Our product’s warranty is limited only to the M100 itself when used normally in accordance with the operating instructions and the system environment. The customer acknowledges and agrees that:
- Duracell is not liable for damage or loss resulting from the use of this product or for any claim from a third party.
- Duracell is not liable for problems with any electronic devices or home appliances or any other hardware arising from the use of this product, the suitability of the product for specific hardware, software, or peripherals, operating conflicts with other installed software, data loss, or other accidental or unavoidable damages.
- Duracell is not liable for financial damages, lost products, claims from third parties, etc., arising from the use of this product.
For more information regarding our product line, customer service and warranty information please contact Duracell Consumer Relations at800-551-2355 or visit our website: www.duracell.com
IMPORTANT SAFETY INFORMATION
- Read all the instructions before using the M100.
- To reduce the risk of injury, close supervision is necessary when the M100 is used near children.
- Do not expose the M100 to rain or snow or use it when lightning is expected or present. Do not place the M100 in direct sunlight. Only place it in clean, dry places.
- Use only recommended Duracell accessories and chargers.
- Do not expose the M100 to fire or excessive temperature. Any such exposure to fire or temperature above 140°F (60°C) may cause an explosion. Do not use near flammable gases or fumes.
- Do not use the M100 with damaged wires or plugs.
- Do not use the M100 if it is damaged or modified. Damage or modification of the M100, including the lithium-ion battery pack within the M100, may exhibit unpredictable behavior resulting in fire, explosion, or risk of injury.
- Make sure to use the M100 in a ventilated environment. Do not restrict the ventilation of the unit in any way during usage.
- During storage, keep the M100 in a dry and ventilated place to avoid moisture and electric shock.
- This M100 has no serviceable parts.
- Do not disassemble, repair, or modify the M100. It may cause fire, explosion, injury, and unpredictable risks.
- Do not remove power cables by pulling on the cable itself, as it may fray and cause a short circuit. Cables should be properly removed by holding their connectors and pulling.
- Do not put coins, metal credit cards, or any other metal objects between your phone and the tiltable lid during wireless charging.
- Please visit www.duracell.com or call Duracell Consumer Relations at800-551-2355 if you experience any problems with the M100.
If instructions are not followed, it can cause hospitalization, serious injury, or death. Serious injuries include blindness, burns, electric shock, etc., leading to complications.
WARNING AND HAZARD TYPES
ELECTRIC SHOCK HAZARD
Do not subject the M100 to mechanical shock. Keep away from children. To
reduce the risk of fire or electric shock, do not open the enclosure or expose
the M100 to rain or moisture. Do not insert foreign objects into the
ventilation holes. All USB plugs must be appropriately inserted and avoid
using damaged cables. Do not operate outside of its operating temperature.
EXPLOSION HAZARD
Do not burn or incinerate the M100. Exposing the M100 to heat or fire may
cause an explosion and personal injury or damage. Do not use near flammable
gases or fumes or apparatus that produces large amounts of heat.
PRODUCT SPECIFICATIONS
M100 Product Name: | M100 |
---|---|
M100 Model: | MCA92W-055Wh |
Charger Product Name: | M-Dock |
Charger Model: | M-Dock 2.0 MYA |
Battery
Chemistry | Li-Ion NMC |
---|---|
Battery Pack Nominal Voltage/Capacity | 10.95V/ 5Ah |
Battery Pack Nominal Energy | 55Wh |
Cell Life Cycles | 500 Cycles to 80% capacity |
Storage Requirement | Recharge every 3-6 months |
Battery Pack Protections | Short Circuit Protection, Over/ Under Temperature |
Protection, Overload Protection, Battery Under and Overvoltage Protection
Ports
USB-C IN/OUT (Input and Output)| 1 x 5V-3A / 9V-3A / 15V-3A / 20V-3A (60W Max
output) & 5V-3A / 9V-3A / 12V-3A / 15V-2.4A / 20V-1.8A (36W Max input)
---|---
USB-A (Output)| 1 X 5V – 2.4A(12W Max)
Tilt Top Wireless Charger (Output)| 15Wmax
Second Wireless Charger (Output)| SW max
Docking Station/Charging Dock| Compatible with M-Dock
Total Output Wattage| 92W (USB-C:60W+ USB-A:12W+ Wireless: 15W+ Wireless2: SW)
M-Dock Input| 100-240V ~ 50/60Hz 1.5A Max
M-Dock Output| 24V2.5A
General
Dimensions| M100: Ø73mm x 143mm
M-Dock: Ø110x14mm (excluding adaptor)
---|---
Weight| PPS: 660g±15g
Adaptor & Dock: 330g±10g
PPS M100 Protections| Short Circuit Protection, Over/ Under Temperature
Protection, Overload Protection, Battery Pack Over Charge & Over Discharge
Protection.
Discharging Temperature| 3.2 -104°F (-16-40°C)
Charging Temperature| 39.2-104°F (4-40°C)
Storage Temperature| 42-85°F (6-29°C)
Certifications| FCC/DOE/UL/RoHS/Prop-65/TSCA
Warranty| 24 Months
Refer to the table on the next page for multiple output power combinations and limits.
SIMULTANEOUS MULTI-PORT COMBINATION & OUTPUT POWER LIMITS
No.| Load Condition| USB-C| USB-A| Qi 15W| Qi
SW| Total Power
---|---|---|---|---|---|---
1| Each port works independently| 60W| x| x| x| 60W
x| 12W| x| x| 12W
x| x| 15W| x| 15W
x| x| x| 5W| 5W
2| Maximum power combination| 60W| 12W| 15W| 5W| 92W
3| USB-C supports fast charging protocols: PD3.0,QC2.0/3.0/3.0+,Samsung AFC,
and Apple 2.4 A
For safety, the M100 will automatically reduce the power during high- temperature operation.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules and Class B Digital Device limits which provide protection against interference in a residential installation. Operation is subject to the following two conditions:
- This device may not cause harmful interference
- This device must accept any interference received, including interference that may cause undesired operation.
This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause interference to radio/TV communications for which the manufacturer is not responsible. Should interference occur, correct by connecting the device to another outlet on a different circuit.
Changes or modifications to this M100 not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules . These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science, and Economic Development Canada’s license-exempt
RSS(s).
Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>