TRAXXAS 68154-4 Slash 4X4 Brus Hless Instruction Manual

September 29, 2024
Traxxas

68154-4 Slash 4X4 Brus Hless

“`html

Product Specifications

  • Brand: Traxxas
  • Model: Various models as listed in the manual
  • Part Categories: Bearings & Bushings, Body &
    Accessories, Driveline Components, Center Driveline, Chassis &
    Attachments, Differential Components, Extreme HD Upgrade Kit

Product Usage Instructions

Assembly of Differential Kit

  1. Identify all components included in the differential kit.

  2. Follow the user manual instructions to assemble the
    differential components.

  3. Ensure proper alignment and tightness of all parts.

Installation of Carriers and Caster Blocks

  1. Select the appropriate carriers or caster blocks based on your
    needs.

  2. Install the carriers or caster blocks using the provided hinge
    pins and screws.

  3. Make sure the installation is secure and aligns with the
    chassis properly.

Maintenance of Ball Bearings

  1. Clean the ball bearings using a suitable cleaner to remove dirt
    and debris.

  2. Apply a small amount of lubricant to ensure smooth
    rotation.

  3. Check for any wear or damage and replace if necessary.

Frequently Asked Questions (FAQ)

Q: How do I know which carrier or caster block to use?

A: Refer to your specific model’s manual or contact Traxxas
support for guidance on choosing the right part for your needs.

Q: Can I upgrade my existing setup with the Extreme HD Upgrade

Kit?

A: Yes, you can enhance the durability and performance of your
vehicle by installing the Extreme HD Upgrade Kit following the
provided instructions.

Q: How often should I replace the ball bearings?

A: It is recommended to inspect the ball bearings regularly and
replace them if you notice any signs of wear or reduced
performance.

“`

Slash® 4X4 Brushless (Model 68154-4) Parts List

Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically.

2728 5119A 5119 5120 5116 5117 5118 5114 3934 2545 1985
1926 1726 6928
5851X
5851G
5851T
5851P
5851R
5851
5851L
6965
6928G
6928T
6928R
6811
6932-GRN
5849 6811R
5824 5850 5850X 6932L
5812
6928L
6811X
5824R 6932-RED
5848 6849 6849R
6812G
6812T
6812R
6812L
2514

Bearings & Bushings
Ball bearings (5x8x2.5mm) (2) Ball bearings, black rubber sealed (10x15x4mm) (2) Ball bearings, blue rubber sealed (10x15x4mm) (2) Ball bearings, blue rubber sealed (12x18x4mm) (2) Ball bearings, blue rubber sealed (5x11x4mm) (2) Ball bearings, blue rubber sealed (6x12x4mm) (2) Ball bearings, blue rubber sealed (8x16x5mm) (2) Ball bearings, blue rubber shield (5x8x2.5mm) (2) Body clips, heavy duty (12) Bushings (plastic) (5x8x2.5mm) (4) PTFE-coated Washers, 5x8x0.5mm (20) (use with ball bearings)
Body & Accessories
Antenna caps, vinyl (2)/ antenna spool Antenna, tube (1)/ vinyl antenna cap (1)/ wire retainer (1) Body conversion kit, Slash 4X4 (includes front & rear body mounts, latches, hardware) (for clipless mounting) Body, Slash® 2WD (also fits Slash® VXL & Slash® 4X4), blue (painted, decals applied) Body, Slash® 2WD (also fits Slash® VXL & Slash® 4X4), green & blue (painted, decals applied) Body, Slash® 2WD (also fits Slash® VXL & Slash® 4X4), orange & blue (painted, decals applied) Body, Slash® 2WD (also fits Slash® VXL & Slash® 4X4), pink & purple (painted, decals applied) Body, Slash® 2WD (also fits Slash® VXL & Slash® 4X4), red & blue (painted, decals applied) Body, Slash® 2WD (also fits Slash® VXL & Slash® 4X4), red (painted, decals applied) Body, Slash® 2WD, ProGraphix® (graphics are printed, requires paint & final color application)/ decal sheet Body, Slash® 4X4 (also fits Slash® VXL & Slash® 2WD) (clear, requires painting)/ window masks/ decal sheet (requires #6967 latches and

6966 latch mounts for clipless mounting) Body, Slash® 4X4 (also fits Slash®

VXL & Slash® 2WD), green & blue (painted, decals applied) Body, Slash® 4X4 (also fits Slash® VXL & Slash® 2WD), orange & blue (painted, decals applied) Body, Slash® 4X4 (also fits Slash® VXL & Slash® 2WD), red & blue (painted, decals applied) Body, Slash® 4X4 (clear, requires painting)/ window masks/ decal sheet Body, Slash® 4X4, green (painted, decals applied) (assembled with front & rear body mount latches for clipless mounting) Body, Slash® 4X4, Hawaiian graphics (painted, decals applied) Body, Slash® 4X4, heavy duty (clear, requires painting)/ window masks/ decal sheet Body, Slash® 4X4, Keegan Kincaid (painted, decals applied) Body, Slash® 4X4, orange (painted, decals applied) Body, Slash® 4X4, orange (painted, decals applied) Body, Slash® 4X4, ProGraphix® (graphics are printed, requires paint & final color application)/ body mount latch (front & rear)/ latch mounts/ decal sheet Body, Slash® 4X4, ProGraphix® (Graphics are printed, requires paint & final color application)/ decal sheet Body, Slash® 4X4, ProGraphix® (graphics are printed, requires paint & final color application)/ decal sheet Body, Slash® 4X4, ProGraphix® (Graphics are printed, requires paint & final color application)/ decal sheet Body, Slash® 4X4, red (painted, decals applied) Body, Slash® 4X4, red (painted, decals applied) (assembled with front & rear body mount latches for clipless mounting) Body, Slash® 4×4, Rock n’ Roll (painted, decals applied) Body, Slash® 4X4/Slash®, Fox Edition (painted, decals applied) Body, Slash® VXL 2WD (also fits Slash® 4X4), Fox® (painted, decals applied) Body, Slash® VXL 2WD (also fits Slash® 4X4), green & blue (painted, decals applied) Body, Slash® VXL 2WD (also fits Slash® 4X4), orange & blue (painted, decals applied) Body, Slash® VXL 2WD (also fits Slash® 4X4), red (painted, decals applied) Body, Slash® VXL, ProGraphix® (graphics are printed, requires paint & final color application)/ decal sheet Decal sheet, racing sponsors

6813R 6966 6967 9950
5119A 5119 5120 5116 5117 6893X
6893G
6841 6877A 6877 6814 6888 6888X 6855 6855G 6855R 7455 9090 6883
5148 6884
6893 6890 6890X 5352R
2575 2554 3932 1647 6878 5556 5351
6976
10125 3924
3628 6835X
6836X
7421 6822 6841 5827
5827X
3629 3925
5119 5117 5118 5381 6814 6780A

Decal sheet, Slash® 4X4 Latch mounts/ retainers (front & rear, left & right) Latch, body mounts (front & rear) Official Team Traxxas® racing decal set(flag logo/ 6-color)
Center Driveline
Ball bearings, black rubber sealed (10x15x4mm) (2) Ball bearings, blue rubber sealed (10x15x4mm) (2) Ball bearings, blue rubber sealed (12x18x4mm) (2) Ball bearings, blue rubber sealed (5x11x4mm) (2) Ball bearings, blue rubber sealed (6x12x4mm) (2) Bearing adapter, 6061-T6 aluminum (blue-anodized) (1)/10x15x4mm ball bearing (black rubber sealed) (1) (for slipper shaft) Bearing adapter, 6061-T6 aluminum (green-anodized) (1)/ 10x15x4mm ball bearing (black rubber sealed) (1) (for slipper shaft) Cover, center driveshaft (clear) Cover, gear (clear) Cover, gear/ motor wire hold-down clip Differential kit, center (complete) Drive hub, center, rear (1)/ 4×3 GS (1) Drive hub, front, hardened steel (1)/ screw pin (1) Driveshaft, center, 6061-T6 aluminum (blue-anodized) Driveshaft, center, 6061-T6 aluminum (green-anodized) Driveshaft, center, 6061-T6 aluminum (red-anodized) Driveshaft, center, plastic (black)/ screw pin Gear adapter, fixed Gear set, center differential (output gears (2)/ spider gears (2)/ spider gear shaft) Grease, white lithium Housing, center differential/ x-ring gaskets (2)/ ring gear gasket/ bushings (2)/ 5x10x0.5 TW (2)/ CCS 2.5×8 (4) Input shaft (slipper shaft)/ bearing adapter (1)/ pin (1) Plate, motor Plate, motor, 6061-T6 aluminum (blue-anodized) Rebuild kit (heavy duty), slipper clutch (steel disc/ aluminum friction pads (3)/ spring (1)/ 2×9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1)) Screws, 3x6mm button-head machine (hex drive) (6) Screws, 3x6mm caphead machine (hex drive) (6) Screws, 3x6mm flat-head machine (hex drive) (6) Silicone Grease Slipper clutch, complete (for Slash 4×4) Slipper pressure plate & hub (aluminum alloy) Slipper pressure plate and hub (alloy)
Chassis & Attachments
Body mount, front/ adapter, front/ inserts (2) (for clipless body mounting) Body mount, rear/ inserts (2) (for clipless body mounting) Box, receiver (sealed)/ foam pad/ silicone grease/2.5x8mm BCS (2)/ 3x10mm CCS (2)/ 3x15mm CCS (2) Box, receiver (sealed)/ foam pad/2.5x8mm CS (4)/ 3x10mm CS (2) Bumper, front / bumper support (fits Slash® 4X4) (for LED light kit installation) Bumper, rear / bumper mount (fits Slash® 4X4) (for LED light kit installation) Chassis conversion kit, low CG (Slash 4×4) Chassis, Slash 4X4 Cover, center driveshaft (clear) Hold down, battery/ hold down retainer/ battery post/ foam spacer/ angled body clip Hold down, battery/ hold down retainer/ battery post/ foam spacer/ angled body clip (allows for installation of taller, multicell batteries) Seal kit, receiver box (includes o-ring, seals, and silicone grease) Seal kit, receiver box (includes o-ring, seals, and silicone grease)
Differential Components
Ball bearings, blue rubber sealed (10x15x4mm) (2) Ball bearings, blue rubber sealed (6x12x4mm) (2) Ball bearings, blue rubber sealed (8x16x5mm) (2) Carrier, differential/ x-ring gaskets (2)/ ring gear gasket/ 6x10x0.5 TW Differential kit, center (complete) Differential kit, center (complete)

For assistance, call 1-888-TRAXXAS, or e-mail Traxxas anytime at support@Traxxas.com

REV. 240408 1727

Page 2 Slash® 4X4 Brushless: TQTM 2.4GHz Radio (Model 68154-4) Parts List

6780 5136X 6788
6789
6882X
6783 6781
6881 6880 6782 5379X 5379R
6879R
6879 3965 1647 5452X

Differential kit, center (complete) (aluminum carrier) Differential oil kit (1 each: 10K, 30K, 50K weights) Differential, front (complete with pinion gear and differential plastics) (fits 1/10-scale Rally & 4X4 VXL models: Slash®, Stampede®, Rustler®) (13/37 ratio) Differential, rear (complete with pinion gear and differential plastics) (fits 1/10-scale Rally & 4X4 VXL models: Slash®, Stampede®, Rustler®) (13/37 ratio) Gear set, differential (output gears (2)/ spider gears (2)/ spider gear shaft, carrier support) Gear set, differential (spider gears (4)/ spider gear shaft (2)) Housing, center differential (aluminum)/ x-ring gaskets (2)/ ring gear gasket (1)/ bushings (4)/ 5x10x0.5 PTW (1)/ 2.5×10 CCS (with threadlock) (4) Housings, differential, front Housings, differential, rear Output gears, center differential, hardened steel (2) Ring gear, differential/ pinion gear, differential Ring gear, differential/ pinion gear, differential (machined, spiral cut) (front) Ring gear, differential/ pinion gear, differential (machined, spiral cut) (rear) Ring gear, differential/ pinion gear, differential (rear) Screws, 2.5x8mm cap-head machine (6) Silicone Grease U-joints, driveshaft (carrier (4)/ 4.5mm cross pin (4)/ 3mm headed pin (4)/ 4x15mm screw pin (2)/ hex pin (2)/ e-clips (6)/ 3x6x0.5 MW (4)) (metal parts for 2 driveshafts)
Driveline Components

5119A 5119 5116 9059X 9057X 9057
9051
9052
6855 6855G 6855R 7455 9051R
9052R
9055X 9056X 9058X 9056
9054 9053 5452X

Ball bearings, black rubber sealed (10x15x4mm) (2) Ball bearings, blue rubber sealed (10x15x4mm) (2) Ball bearings, blue rubber sealed (5x11x4mm) (2) Cross pin (2)/ drive pin (2) (repairs 1 axle shaft) Differential output shafts, steel-splined constant-velocity (2) Differential output yoke assembly, extreme heavy duty (2) (left or right, front or rear) (assembled with external-splined half shaft) (for use with #9080 upgrade kit) Driveshaft assembly, front, extreme heavy duty with 6mm axle (1)/ screw pin (1) (left or right) (fully assembled, ready to install) (for use with #9080 upgrade kit) Driveshaft assembly, rear, extreme heavy duty with 6mm axle (1)/ screw pin (1) (left or right) (fully assembled, ready to install) (for use with #9080 upgrade kit) Driveshaft, center, 6061-T6 aluminum (blue-anodized) Driveshaft, center, 6061-T6 aluminum (green-anodized) Driveshaft, center, 6061-T6 aluminum (red- anodized) Driveshaft, center, plastic (black)/ screw pin Driveshafts, front, extreme heavy duty, steel-spline constantvelocity with 6mm stub axles (complete assembly) (2) (for use with #9080 upgrade kit) Driveshafts, rear, extreme heavy duty, steel-spline constantvelocity with 6mm stub axles (complete assembly) (2) (for use with #9080 upgrade kit) Half shaft, external splined (steel-spline constant velocity) (1) Half shaft, internal splined (steel-spline constant velocity) (1) Rebuild kit, steel-splined constant- velocity driveshafts (includes pins and hardware for one axle shaft) Stub axle assembly, front, outer, extreme heavy duty (1) (left or right) (assembled with internal-splined half shaft) (for use with #9080 upgrade kit) Stub axle, front, 6mm, extreme heavy duty (for use with #9051R steel CV driveshafts) Stub axle, rear, 6mm, extreme heavy duty (for use with #9052R steel CV driveshafts) U-joints, driveshaft (carrier (4)/ 4.5mm cross pin (4)/ 3mm headed pin (4)/ 4x15mm screw pin (2)/ hex pin (2)/ e-clips (6)/ 3x6x0.5 MW (4)) (metal parts for 2 driveshafts)
Extreme HD Upgrade Kit

9050

Carriers, stub axle, rear, extreme heavy duty, black (left & right)/

3x41mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080

upgrade kit)

9050X

Carriers, stub axle, rear, extreme heavy duty, blue (left & right)/

3x41mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080

upgrade kit)

9050-GRAY Carriers, stub axle, rear, extreme heavy duty, gray (left & right)/

3x41mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080

upgrade kit)

9050G

Carriers, stub axle, rear, extreme heavy duty, green (left & right)/

3x41mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080

upgrade kit)

9050T

Carriers, stub axle, rear, extreme heavy duty, orange (left &

right)/ 3x41mm hinge pins (2)/ 3x20mm BCS (2) (for use with

9080 upgrade kit)

9050R

Carriers, stub axle, rear, extreme heavy duty, red (left & right)/

3x41mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080

upgrade kit)

9032

Caster blocks (c-hubs), extreme heavy duty, black (left & right)/

3x32mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080

upgrade kit)

9032X

Caster blocks (c-hubs), extreme heavy duty, blue (left & right)/

3x32mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080

upgrade kit)

9032-GRAY Caster blocks (c-hubs), extreme heavy duty, gray (left & right)/

3x32mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080

upgrade kit)

9032G

Caster blocks (c-hubs), extreme heavy duty, green (left & right)/

3x32mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080

upgrade kit)

9032T

Caster blocks (c-hubs), extreme heavy duty, orange (left & right)/

3x32mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080

upgrade kit)

9032R

Caster blocks (c-hubs), extreme heavy duty, red (left & right)/

3x32mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080

upgrade kit)

9057

Differential output yoke assembly, extreme heavy duty (2) (left or

right, front or rear) (assembled with external-splined half shaft) (for

use with #9080 upgrade kit)

9051

Driveshaft assembly, front, extreme heavy duty with 6mm axle (1)/

screw pin (1) (left or right) (fully assembled, ready to install) (for use

with #9080 upgrade kit)

9052

Driveshaft assembly, rear, extreme heavy duty with 6mm axle (1)/

screw pin (1) (left or right) (fully assembled, ready to install) (for use

with #9080 upgrade kit)

9051R

Driveshafts, front, extreme heavy duty, steel-spline constant-

velocity with 6mm stub axles (complete assembly) (2) (for use

with #9080 upgrade kit)

9052R

Driveshafts, rear, extreme heavy duty, steel-spline constant-

velocity with 6mm stub axles (complete assembly) (2) (for use

with #9080 upgrade kit)

9080

Outer Driveline & Suspension Upgrade Kit, extreme heavy duty,

black

9080X

Outer Driveline & Suspension Upgrade Kit, extreme heavy duty, blue

9080-GRAY Outer Driveline & Suspension Upgrade Kit, extreme heavy duty,

gray

9080G

Outer Driveline & Suspension Upgrade Kit, extreme heavy duty,

green

9080T

Outer Driveline & Suspension Upgrade Kit, extreme heavy duty,

orange

9080R

Outer Driveline & Suspension Upgrade Kit, extreme heavy duty,

red

9043

Screw pins, 3x16mm, extreme heavy duty (6) (for use with #9080

upgrade kit)

9038

Shock tower, front, extreme heavy duty, black (for use with

9080 upgrade kit)

9038X

Shock tower, front, extreme heavy duty, blue (for use with #9080

upgrade kit)

9038-GRAY Shock tower, front, extreme heavy duty, gray (for use with #9080

upgrade kit)

9038G

Shock tower, front, extreme heavy duty, green (for use with

9080 upgrade kit)

9038T

Shock tower, front, extreme heavy duty, orange (for use with

9080 upgrade kit)

9038R

Shock tower, front, extreme heavy duty, red (for use with #9080

upgrade kit)

9039

Shock tower, rear, extreme heavy duty, black (for use with #9080

upgrade kit)

9039X

Shock tower, rear, extreme heavy duty, blue (for use with #9080

upgrade kit)

9039-GRAY Shock tower, rear, extreme heavy duty, gray (for use with #9080

upgrade kit)

9039G

Shock tower, rear, extreme heavy duty, green (for use with #9080

upgrade kit)

9039T

Shock tower, rear, extreme heavy duty, orange (for use with

9080 upgrade kit)

9039R

Shock tower, rear, extreme heavy duty, red (for use with #9080

upgrade kit)

9037

Steering blocks, extreme heavy duty, black (left & right)/ 3x20mm

BCS (2) (for use with #9080 upgrade kit)

9037X

Steering blocks, extreme heavy duty, blue (left & right)/ 3x20mm BCS

(2) (for use with #9080 upgrade kit)

9037-GRAY Steering blocks, extreme heavy duty, gray (left & right)/ 3x20mm

BCS (2) (for use with #9080 upgrade kit)

9037G

Steering blocks, extreme heavy duty, green (left & right)/

3x20mm BCS (2) (for use with #9080 upgrade kit)

BFGoodrich and all associated names are trademarks used with permission. Distributed under license by Traxxas LP. Copyright © 2024 MNA, Inc. All rights reserved.

REV. 240408 1727

Page 3 Slash® 4X4 Brushless: TQTM 2.4GHz Radio (Model 68154-4) Parts List

9037T 9037R 9056
9055
9054 9053 9042
9042X
9069

Steering blocks, extreme heavy duty, orange (left & right)/ 3x20mm BCS (2) (for use with #9080 upgrade kit) Steering blocks, extreme heavy duty, red (left & right)/ 3x20mm BCS (2) (for use with #9080 upgrade kit) Stub axle assembly, front, outer, extreme heavy duty (1) (left or right) (assembled with internal-splined half shaft) (for use with #9080 upgrade kit) Stub axle assembly, rear, outer, extreme heavy duty (1) (left or right) (assembled with internal-splined half shaft) (for use with #9080 upgrade kit) Stub axle, front, 6mm, extreme heavy duty (for use with #9051R steel CV driveshafts) Stub axle, rear, 6mm, extreme heavy duty (for use with #9052R steel CV driveshafts) Suspension pin set, extreme heavy duty, complete (front and rear) (3x52mm (4), 3x32mm (2), 3x40mm (2)) (for use with #9080 upgrade kit) Suspension pin set, extreme heavy duty, complete (front and rear) (hardened steel) (3x52mm (4), 3x32mm (2), 3x40mm (2))/ M2.5×0.45mm NL (8) (for use with #9080 upgrade kit) Wheel hubs, 12mm hex (steel), extreme heavy duty (4)/ 2×9.8mm pin (4) (for use with #9080 upgrade kit and 6mm axles)
Front Suspension & Steering

6823

Bulkhead tie bars, front & rear, aluminum (blue-anodized)

6823G

Bulkhead tie bars, front & rear, aluminum (green-anodized)

6823R

Bulkhead tie bars, front & rear, aluminum (red-anodized)

6830X

Bulkhead, front

6748-BLK Camber link set (plastic/ non-adjustable) (front &rear) (black)

3643X

Camber links, front (TUBES blue-anodized, 7075-T6 aluminum,

stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum

wrench (1) (#2579 3×15 BCS (4) required for installation)

3643G

Camber links, front (TUBES green-anodized, 7075-T6 aluminum,

stronger than Titanium) (83mm) (2)/ rod ends (4)/ aluminum

wrench (1) (#2579 3×15 BCS (4) required for installation)

3643R

Camber links, front (TUBES red-anodized, 7075-T6 aluminum,

stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum

wrench (1) (#2579 3×15 BCS (4) required for installation)

9032

Caster blocks (c-hubs), extreme heavy duty, black (left & right)/

3x32mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080

upgrade kit)

9032X

Caster blocks (c-hubs), extreme heavy duty, blue (left & right)/

3x32mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080

upgrade kit)

9032-GRAY Caster blocks (c-hubs), extreme heavy duty, gray (left & right)/

3x32mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080

upgrade kit)

9032G

Caster blocks (c-hubs), extreme heavy duty, green (left & right)/

3x32mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080

upgrade kit)

9032T

Caster blocks (c-hubs), extreme heavy duty, orange (left & right)/

3x32mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080

upgrade kit)

9032R

Caster blocks (c-hubs), extreme heavy duty, red (left & right)/

3x32mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080

upgrade kit)

9057

Differential output yoke assembly, extreme heavy duty (2) (left or

right, front or rear) (assembled with external-splined half shaft) (for

use with #9080 upgrade kit)

6845A

Drag link, machined 6061-T6 aluminum (blue-anodized)

6845G

Drag link, machined 6061-T6 aluminum (green-anodized)

6845T

Drag link, machined 6061-T6 aluminum (orange-anodized)

6845R

Drag link, machined 6061-T6 aluminum (red-anodized)

9051

Driveshaft assembly, front, extreme heavy duty with 6mm axle (1)/

screw pin (1) (left or right) (fully assembled, ready to install) (for use

with #9080 upgrade kit)

9051R

Driveshafts, front, extreme heavy duty, steel-spline constant-

velocity with 6mm stub axles (complete assembly) (2) (for use

with #9080 upgrade kit)

6846

Linkage, steering (Revo) (3x20mm turnbuckle) (1)/ rod ends (2)/

hollow balls (2)

3646

Screws, 3x15mm flat-head machine (hex drive) (6)

9038

Shock tower, front, extreme heavy duty, black (for use with

9080 upgrade kit)

9038X

Shock tower, front, extreme heavy duty, blue (for use with #9080

upgrade kit)

9038-GRAY Shock tower, front, extreme heavy duty, gray (for use with #9080

upgrade kit)

9038G

Shock tower, front, extreme heavy duty, green (for use with

9080 upgrade kit)

9038T

Shock tower, front, extreme heavy duty, orange (for use with

9080 upgrade kit)

9038R

Shock tower, front, extreme heavy duty, red (for use with #9080

upgrade kit)

6845X

Steering bellcranks/ servo saver/ servo saver spring/ servo spring

retainer/servo horn, steering

9037

Steering blocks, extreme heavy duty, black (left & right)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)

9037X

Steering blocks, extreme heavy duty, blue (left & right)/ 3x20mm BCS

(2) (for use with #9080 upgrade kit)

9037-GRAY Steering blocks, extreme heavy duty, gray (left & right)/ 3x20mm

BCS (2) (for use with #9080 upgrade kit)

9037G

Steering blocks, extreme heavy duty, green (left & right)/

3x20mm BCS (2) (for use with #9080 upgrade kit)

9037T

Steering blocks, extreme heavy duty, orange (left & right)/

3x20mm BCS (2) (for use with #9080 upgrade kit)

9037R

Steering blocks, extreme heavy duty, red (left & right)/ 3x20mm

BCS (2) (for use with #9080 upgrade kit)

9056

Stub axle assembly, front, outer, extreme heavy duty (1) (left or right)

(assembled with internal-splined half shaft) (for use with #9080

upgrade kit)

3655P

Suspension arms, blue, front/rear (left & right), heavy duty (2)

3655R

Suspension arms, front/rear (left & right), heavy duty (2)

3655G

Suspension arms, green, front/rear (left & right), heavy duty (2)

3655T

Suspension arms, orange, front/rear (left & right), heavy duty (2)

3655L

Suspension arms, red, front/rear (left & right), heavy duty (2)

6834

Suspension pin set, complete (front and rear)

9042

Suspension pin set, extreme heavy duty, complete (front and rear)

(3x52mm (4), 3x32mm (2), 3x40mm (2)) (for use with #9080 upgrade

kit)

9042X

Suspension pin set, extreme heavy duty, complete (front and

rear) (hardened steel) (3x52mm (4), 3x32mm (2), 3x40mm (2))/

M2.5×0.45mm NL (8) (for use with #9080 upgrade kit)

6742

Toe link, front & rear (molded composite) (2)/ hollow balls (4) (87mm

center to center)

6742X

Toe links (TUBES blue-anodized, 7075-T6 aluminum, stronger

than titanium) (87mm) (2)/ rod ends (4) aluminum wrench (1)

6742G

Toe links (TUBES green-anodized, 7075-T6 aluminum, stronger

than titanium) (87mm) (2)/ rod ends (4) aluminum wrench (1)

6742R

Toe links (TUBES red-anodized, 7075-T6 aluminum, stronger

than titanium) (87mm) (2)/ rod ends (4) aluminum wrench (1)

3643

Turnbuckles, camber link, 49mm (82mm center to center)

(assembled with rod ends and hollow balls) (1 left, 1 right)

Hardware

1926 1726 3935 3935A 3934 1589 2745 1747P 3647 8347 1747 1747R 1747G 1747T 1747A 1985 5525 2742X 3347 3215 3965 2577 2578 2552 2579 2586 3646 2583 2580 2591 2582 2592 2575 2534 3932 2576 1552
3931 3937 2542

Antenna caps, vinyl (2)/ antenna spool Antenna, tube (1)/ vinyl antenna cap (1)/ wire retainer (1) Body clip (mounting clip), angled, 90-degrees (10) Body clip (mounting clip), angled, 90-degrees (black) (10) Body clips, heavy duty (12) Double-sided adhesive tape (25mm x 25mm) Nuts, 3mm nylon locking (12) Nuts, 4mm flanged nylon locking (aluminum, pink anodized) (4) Nuts, 4mm flanged nylon locking (steel, serrated) (8) Nuts, 4mm flanged nylon locking, serrated (black) (10) Nuts, 4mm nylon locking (10) Nuts, aluminum, flanged, serrated (4mm) (blue-anodized) (4) Nuts, aluminum, flanged, serrated (4mm) (green-anodized) (4) Nuts, aluminum, flanged, serrated (4mm) (orange-anodized) (4) Nuts, aluminum, flanged, serrated (4mm) (red-anodized) (4) PTFE-coated Washers, 5x8x0.5mm (20) (use with ball bearings) Rod ends (12)/ hollow balls (12) Rod ends, short (6)/ hollow balls (6) Screws, 2.5x5mm button-head machine (hex drive) (6) Screws, 2.5x6mm cap-head machine (hex drive) (6) Screws, 2.5x8mm cap-head machine (6) Screws, 3x10mm button-head machine (hex drive) (6) Screws, 3x12mm button-head machine (hex drive) (6) Screws, 3x12mm countersunk machine (6) (hex drive) Screws, 3x15mm button-head machine (hex drive) (6) Screws, 3x15mm cap-head machine (hex drive) (6) Screws, 3x15mm flat-head machine (hex drive) (6) Screws, 3×18 button-head machine (hex drive) (6) Screws, 3x20mm button-head machine (hex drive) (6) Screws, 3x23mm button- head machine (hex drive) (6) Screws, 3x30mm button-head machine (hex drive) (6) Screws, 3x40mm button-head machine (hex drive) (6) Screws, 3x6mm button- head machine (hex drive) (6) Screws, 3x6mm countersunk machine (6) (hex drive) Screws, 3x6mm flat-head machine (hex drive) (6) Screws, 3x8mm button-head machine (hex drive) (6) Screws, 3x8mm cap-head machine (hex drive) (6)/washers (6)/ wrench Screws, 3x8mm flat-head machine (hex drive) (6) Screws, 4x12mm button-head machine (hex drive) (6) Screws, 4x12mm countersunk machine (hex drive) (6)

BFGoodrich and all associated names are trademarks used with permission. Distributed under license by Traxxas LP. Copyright © 2024 MNA, Inc. All rights reserved.

REV. 240408 1727

Page 4 Slash® 4X4 Brushless: TQTM 2.4GHz Radio (Model 68154-4) Parts List

2546 2743 3642X 2754 2746
6835X
6836X
5893
6894
2263
1726 2260
3382
3383
3340
9090 2053 2072A 2252 6860A
6860R 3384 3347 3932 2254 2253 2251
2074 2075R 2075 2250
2255
2075X 2056 3350R
2827X 2842X 2843X 2869X 2914 2976 2938X
2943 6548
2923X 2926X 2942X 2940X 2941X 2952X 2950X 2951X 2960X 2961X 2985-2S
2260
2927R 2975

Screws, 4x15mm countersunk machine (hex drive) (6) Set (grub) screws, 3mm hardened (12) Shoulder screws, Ultra Shocks (3×12 hex drive) (6) Stub axle pins (4) Washers, 3x6mm metal (12)
LED Lights
Bumper, front / bumper support (fits Slash® 4X4) (for LED light kit installation) Bumper, rear / bumper mount (fits Slash® 4X4) (for LED light kit installation) LED light harness, rear (requires #5838, 6737X, or 6836 rear bumper) LED light set, complete (includes front and rear bumpers with LED light bar, rear LED harness, & BEC Y-harness) (fits Slash® 4X4) Y-harness, BEC to LED light set
Motors & Electronics
Antenna, tube (1)/ vinyl antenna cap (1)/ wire retainer (1) BEC assembly (complete) (12.6 volts (3s LiPo) maximum input voltage) BL-2sTM Brushless Power System, waterproof (includes BL-2sTM ESC & BL-2sTM 3300 motor) BL-2sTM Electronic Speed Control, waterproof (brushless) (fwd/rev/brake) Cooling fan, electronic speed control, Velineon® VXL-3s or BL2sTM Gear adapter, fixed Gear set (for 2055, 2056 servos) Gear set (for 2070, 2075 servos) Gear set, metal (for 2250, 2255 servos) Motor mount (assembled with 3×6 flat-head machine screw)/ 3.0mm NL (1) Motor mount, 6061-T6 aluminum (blue-anodized) Motor, BL- 2sTM 3300, brushless Screws, 2.5x5mm button-head machine (hex drive) (6) Screws, 3x6mm flat-head machine (hex drive) (6) Servo case, aluminum (middle) (blue-anodized) (for 2250 servo) Servo case, aluminum (middle) (red-anodized) (for 2255 servo) Servo case, plastic (top, middle, bottom)/ gaskets/ hardware (for 2250, 2255 servos) Servo case/gaskets (for 2056 and 2075 waterproof servos) Servo, digital high-speed, metal gear (ball bearing), waterproof Servo, digital high-torque (ball bearing), waterproof Servo, digital high- torque 330 coreless, metal gear (ball bearing), waterproof Servo, digital high-torque 400 brushless, metal gear (ball bearing), waterproof Servo, digital high-torque, metal gear (ball bearing), waterproof Servo, high-torque, waterproof (blue case) Velineon® VXL-3s Brushless Power System, waterproof (includes VXL-3s waterproof ESC , Velineon® 3500 motor, and speed control mounting plate (part #3725))
Radio System, Batteries & Chargers
3000mah 7.4v 2-Cell LiPo Battery 5000mah 7.4v 2-Cell 25C LiPo Battery 5800mah 7.4v 2-Cell 25C LiPo Battery 7600mah 7.4v 2-Cell 25C LiPo Battery AA 4PK AC to DC adapter Adapter, Traxxas® iD® LiPo battery (adapts Traxxas® iD® batteries to separate balance ports) Battery charge indicators, green (4), grey (4), blue (4) Battery door, TQ 2.4 transmitter (replacement for #6516, 6517 transmitter) Battery, Power Cell, 3000mAh (NiMH, 7-C flat, 8.4V) Battery, Power Cell, 3000mAh (NiMH, 7-C hump, 8.4V) Battery, Series 3 Power Cell, 3300mAh (NiMH, 6-C flat, 7.2V) Battery, Series 3 Power Cell, 3300mAh (NiMH, 7-C flat, 8.4V) Battery, Series 3 Power Cell, 3300mAh (NiMH, 7-C hump, 8.4V) Battery, Series 4 Power Cell, 4200mAh (NiMH, 6-C flat, 7.2V) Battery, Series 4 Power Cell, 4200mAh (NiMH, 7-C flat, 8.4V) Battery, Series 4 Power Cell, 4200mAh (NiMH, 7-C hump, 8.4V) Battery, Series 5 Power Cell, 5000mAh (NiMH, 7-C flat, 8.4V) Battery, Series 5 Power Cell, 5000mAh (NiMH, 7-C hump, 8.4V) Battery/charger completer pack (includes #2985 charger (1), #2827X 3000mAh 7.4V 2-cell 20C LiPo iD® Battery (1)) BEC assembly (complete) (12.6 volts (3s LiPo) maximum input voltage) Charger, A/C, 500 mAh (7 cell, NiMH) Charger, D/C, 4 amp (6 – 7 cell, 7.2 – 8.4 volt, NiMH)

2972
2973
2970
2981
2985
6512 2978 2053 2072A 2252 2968X
2968
6535
6519 6533 3932 6520 6521 2254 2253 2251
2074 2075R 2075 2250
2255
2075X 2056 6539
6538
6540 6509R
6507R
6516 6528
6529
6530
6511
68154-4
6823 6823G 6823R 6829 6748-BLK 3644X
3644G
3644R
9050
9050X

Charger, EZ-Peak Dual, 100W, NiMH/LiPo with iD Auto Battery Identification Charger, EZ-Peak Live Dual, 200W, NiMH/LiPo with iD Auto Battery Identification Charger, EZ-Peak Plus, 4 amp, NiMH/LiPo with iD Auto Battery Identification Charger, EZ-Peak® Plus 4s, 8 amp, NiMH/LiPo with iD® Auto Battery Identification Charger, EZ-Peak®, USB-C, 40W, NiMH/LiPo with iD® Auto Battery Identification Cover plate, Traxxas® Link Bluetooth® module Fuse, D/C charger, 5A (2) (for #2974, 2975, 2977) Gear set (for 2055, 2056 servos) Gear set (for 2070, 2075 servos) Gear set, metal (for 2250, 2255 servos) LiPo cell voltage checker/balancer (includes #2938X adapter for Traxxas® iD® batteries) LiPo cell voltage checker/balancer (requires #2938X adapter for Traxxas® iD® batteries) Mount, temperature sensor (electric motors)/ wire tie/ thermal pad Receiver, micro, TQ 2.4GHz (3-channel) Receiver, micro, TQi 2.4GHz with telemetry & TSM® (5-channel) Screws, 3x6mm flat-head machine (hex drive) (6) Sensor, RPM (long)/ 3x4mm BCS (1)/ 3×4 GS (1) Sensor, temperature and voltage (long) Servo case, aluminum (middle) (blue-anodized) (for 2250 servo) Servo case, aluminum (middle) (red-anodized) (for 2255 servo) Servo case, plastic (top, middle, bottom)/ gaskets/ hardware (for 2250, 2255 servos) Servo case/gaskets (for 2056 and 2075 waterproof servos) Servo, digital high-speed, metal gear (ball bearing), waterproof Servo, digital high-torque (ball bearing), waterproof Servo, digital high-torque 330 coreless, metal gear (ball bearing), waterproof Servo, digital high-torque 400 brushless, metal gear (ball bearing), waterproof Servo, digital high-torque, metal gear (ball bearing), waterproof Servo, high-torque, waterproof (blue case) Telemetry trigger magnet holder, center differential/ magnet, 5x2mm (1)/ 3x8mm BCS (3) (for use with #6814 center differential) Telemetry trigger magnet holders, spur gear/ magnet, 5x2mm (1)/ 3x8mm CCS (3)/ 3x10mm CCS (3) Telemetry trigger magnet, 5X2mm (1) TQi 2.4 GHz High Output radio system, 2-channel, Traxxas® Link enabled, TSM® (2-ch transmitter, 5-ch micro receiver) TQi 2.4 GHz High Output radio system, 4-channel with Traxxas® Link Bluetooth® module, TSM® (4-ch transmitter, 5-ch micro receiver) Transmitter, TQ 2.4GHz, 2-channel (transmitter only) Transmitter, TQi Traxxas® Link enabled, 2.4GHz high output, 2channel (transmitter only) Transmitter, TQi Traxxas® Link enabled, 2.4GHz high output, 3channel (transmitter only) Transmitter, TQi Traxxas® Link enabled, 2.4GHz high output, 4channel (transmitter only) Traxxas® Link Bluetooth® module
Ready-To-Race Model
Slash® 4X4 Brushless: 1/10 Scale 4WD Electric Short Course Truck with TQ 2.4GHz Radio System
Rear Suspension
Bulkhead tie bars, front & rear, aluminum (blue-anodized) Bulkhead tie bars, front & rear, aluminum (green-anodized) Bulkhead tie bars, front & rear, aluminum (red-anodized) Bulkhead, rear Camber link set (plastic/ non- adjustable) (front &rear) (black) Camber links, rear (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (73mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3×15 BCS (4) required for installation) Camber links, rear (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (73mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3×15 BCS (4) required for installation) Camber links, rear (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (73mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3×15 BCS (4) required for installation) Carriers, stub axle, rear, extreme heavy duty, black (left & right)/ 3x41mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit) Carriers, stub axle, rear, extreme heavy duty, blue (left & right)/ 3x41mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)

BFGoodrich and all associated names are trademarks used with permission. Distributed under license by Traxxas LP. Copyright © 2024 MNA, Inc. All rights reserved.

REV. 240408 1727

Page 5 Slash® 4X4 Brushless: TQTM 2.4GHz Radio (Model 68154-4) Parts List

9050-GRAY Carriers, stub axle, rear, extreme heavy duty, gray (left & right)/

3x41mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080

upgrade kit)

9050G

Carriers, stub axle, rear, extreme heavy duty, green (left & right)/

3x41mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080

upgrade kit)

9050T

Carriers, stub axle, rear, extreme heavy duty, orange (left &

right)/ 3x41mm hinge pins (2)/ 3x20mm BCS (2) (for use with

9080 upgrade kit)

9050R

Carriers, stub axle, rear, extreme heavy duty, red (left & right)/

3x41mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)

9052

Driveshaft assembly, rear, extreme heavy duty with 6mm axle (1)/

screw pin (1) (left or right) (fully assembled, ready to install) (for use

with #9080 upgrade kit)

9052R

Driveshafts, rear, extreme heavy duty, steel-spline constant-

velocity with 6mm stub axles (complete assembly) (2) (for use

with #9080 upgrade kit)

9039

Shock tower, rear, extreme heavy duty, black (for use with #9080 upgrade kit)

9039X

Shock tower, rear, extreme heavy duty, blue (for use with #9080

upgrade kit)

9039-GRAY Shock tower, rear, extreme heavy duty, gray (for use with #9080

upgrade kit)

9039G

Shock tower, rear, extreme heavy duty, green (for use with #9080

upgrade kit)

9039T

Shock tower, rear, extreme heavy duty, orange (for use with

9080 upgrade kit)

9039R

Shock tower, rear, extreme heavy duty, red (for use with #9080

upgrade kit)

9056

Stub axle assembly, front, outer, extreme heavy duty (1) (left or right)

(assembled with internal-splined half shaft) (for use with #9080

upgrade kit)

9055

Stub axle assembly, rear, outer, extreme heavy duty (1) (left or right)

(assembled with internal-splined half shaft) (for use with #9080

upgrade kit)

3655P

Suspension arms, blue, front/rear (left & right), heavy duty (2)

3655R

Suspension arms, front/rear (left & right), heavy duty (2)

3655G

Suspension arms, green, front/rear (left & right), heavy duty (2)

3655T

Suspension arms, orange, front/rear (left & right), heavy duty (2)

3655L

Suspension arms, red, front/rear (left & right), heavy duty (2)

6834

Suspension pin set, complete (front and rear)

9042

Suspension pin set, extreme heavy duty, complete (front and rear)

(3x52mm (4), 3x32mm (2), 3x40mm (2)) (for use with #9080 upgrade

kit)

9042X

Suspension pin set, extreme heavy duty, complete (front and

rear) (hardened steel) (3x52mm (4), 3x32mm (2), 3x40mm (2))/ M2.5×0.45mm NL (8) (for use with #9080 upgrade kit)

3644

Turnbuckles, camber link, 39mm (69mm center to center)

(assembled with rod ends and hollow balls) (1 left, 1 right) (fits

front & rear on Slash, rear on Slash 4X4)

Shock Oil

5031 5032 5033 5034 5035 5036 5037 5029 5038X
5038

Oil, shock (20 wt, 200 cSt, 60cc) (silicone) Oil, shock (30 wt, 350 cSt, 60cc) (silicone) Oil, shock (40 wt, 500 cSt, 60cc) (silicone) Oil, shock (50 wt, 600 cSt, 60cc) (silicone) Oil, shock (60 wt, 700 cSt, 60cc) (silicone) Oil, shock (70 wt, 900 cSt, 60cc) (silicone) Oil, shock (80 wt, 1,000 cSt, 60cc) (silicone) Shock oil bottle (60cc) (for mixing shock oil) Shock oil set (includes 20 wt, 30 wt, 40 wt, 50 wt, 60 wt, 70 wt, & 80 wt premium shock oils with spinning carousel rack) Spinning carousel rack
Shocks (GTR)

7466X 7466
7466G

Body, GTR long (hard-anodized, PTFE-coated aluminum) (1) Body, GTR long shock, aluminum (blue-anodized) (PTFE-coated bodies) (1) Body, GTR long shock, aluminum (green-anodized) (PTFEcoated bodies) (1)

7466A 7466R 7467X 7467 7467G 7467A

Body, GTR long shock, aluminum (orange-anodized) (PTFEcoated bodies) (1) Body, GTR long shock, aluminum (red-anodized) (PTFE-coated bodies) (1) Body, GTR xx- long (hard-anodized, PTFE-coated aluminum) (1) Body, GTR xx-long shock, aluminum (blue-anodized) (PTFEcoated bodies) (1) Body, GTR xx-long shock, aluminum (green-anodized) (PTFEcoated bodies) (1) Body, GTR xx-long shock, aluminum (orange-anodized) (PTFEcoated bodies) (1)

7467R
7468X
7468
5475 5158 7463
5469 7464T 7461
7461G
7461X
7462
7462G
7462X
8459 7440 7441 7444 7445 7448 7442 7443 7446 7447 7449
2664 5862
2660
2662
2669
1942
2742X 2667 2362 1664T 2656T
1664 2656 1765 2668
6863 6864 6862 6861 6857 6867 6868 6866 6865 6858
3765A 3766A 1942
2742X 8361 3767A
3767G

Body, GTR xx-long shock, aluminum (red-anodized) (PTFEcoated bodies) (1) Caps & spring retainers, GTR shock (upper cap (2)/ hollow balls (4)/ bottom cap (2)/ upper retainer (2)/ lower retainer (2)) Caps and spring retainers, GTR long/xx-long shock (upper cap (2)/ hollow balls (4)/ bottom cap (2)/ upper retainer (2)/ lower retainer (2)) Multi-tool (plastic) Nuts, 2.5mm nylon locking (12) Rebuild kit, GTR long/xx-long shocks (x-rings, bladders, pistons, piston nuts, shock rod ends, hollow balls) (renews 2 shocks) Rod ends (GTR shocks) Shaft, GTR long, TiN-coated (2) Shocks, GTR long blue-anodized, PTFE- coated bodies with TiN shafts (fully assembled, without springs) (2) Shocks, GTR long green-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2) Shocks, GTR long, hard-anodized, PTFE-coated bodies with TiN shafts (assembled) (2) (without springs) Shocks, GTR xx-long blue- anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2) Shocks, GTR xx-long green-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2) Shocks, GTR xx-long, hard- anodized, PTFE-coated bodies with TiN shafts (assembled) (2) (without springs) Spring retainers, lower (captured) (4)/ 2.5×10 CS (4) Spring, shock, white (GTR long) (0.623 rate orange) (1 pair) Spring, shock, white (GTR long) (0.653 rate green) (1 pair) Spring, shock, white (GTR long) (0.767 rate black) (1 pair) Spring, shock, white (GTR long) (0.810 rate pink) (1 pair) Spring, shock, white (GTR long) (0.892 rate blue) (1 pair) Spring, shock, white (GTR xx-long) (0.711 rate orange) (1 pair) Spring, shock, white (GTR xx-long) (0.762 rate green) (1 pair) Spring, shock, white (GTR xx-long) (0.874 rate black) (1 pair) Spring, shock, white (GTR xx-long) (0.884 rate pink) (1 pair) Spring, shock, white (GTR xx-long) (1.004 rate blue) (1 pair)
Shocks (Pro-level Aluminum)
Big Bore shock cylinder (long) (1) Big Bore shocks (hard-anodized & PTFE- coated T6 aluminum) (assembled with TiN shafts and springs) (front & rear) (4) Big-bore shocks (long) (hard-anodized & PTFE-coated T6 aluminum) (assembled with TiN shafts) w/o springs (2) Big-bore shocks (xx-long) (hard-anodized & PTFE-coated T6 aluminum) (assembled with TiN shafts) w/o springs (rear) (2) Piston head set (2-hole (2)/ 3-hole (2))/ shock mounting bushings & washers (2) (Big Bore Shocks) Rod ends (16 long & 4 short)/ hollow ball connectors (18)/ ball screws (2) Rod ends, short (6)/ hollow balls (6) Shock caps, aluminum (2) (Big Bore Shocks) Shock rebuild kit (for 2 shocks) Shock shafts, hardened steel, titanium nitride coated (long) (2) Shock shafts, hardened steel, titanium nitride coated (xx-long) (2) Shock shafts, steel, chrome finish (long) (2) Shock shafts, steel, chrome finish (xx-long) (2) Silicone diaphragms (4) Spring retainers, upper & lower (2)/ spring pre-load spacers: 1mm (4)/ 1.5mm (2)/ 2mm (2)/ 4mm (2)/ 8mm (2) (Big Bore Shocks) Springs, front (progressive, +10% rate, pink) (2) Springs, front (progressive, +20% rate, blue) (2) Springs, front (progressive, -10% rate, green) (2) Springs, front (progressive, -20% rate, orange) (2) Springs, front (white) (progressive rate) (2) Springs, rear (progressive, +10% rate, pink) (2) Springs, rear (progressive, +20% rate, blue) (2) Springs, rear (progressive, -10% rate, green) (2) Springs, rear (progressive, -20% rate, orange) (2) Springs, rear (white) (progressive rate) (2)
Shocks (Ultra Shocks)
Body, Ultra Shock (long) (grey) (2) Body, Ultra Shock (XXL) (grey) (2) Rod ends (16 long & 4 short)/ hollow ball connectors (18)/ ball screws (2) Rod ends, short (6)/ hollow balls (6) Shock caps (black) (4) (assembled with hollow balls) Shock caps, aluminum (blue-anodized) (4) (fits all Ultra Shocks)
Shock caps, aluminum (green-anodized) (4) (fits all Ultra Shocks)

BFGoodrich and all associated names are trademarks used with permission. Distributed under license by Traxxas LP. Copyright © 2024 MNA, Inc. All rights reserved.

REV. 240408 1727

Page 6 Slash® 4X4 Brushless: TQTM 2.4GHz Radio (Model 68154-4) Parts List

3767T
3767P 3767X 2362 1664T 2656T
1664 2656 1765 3769 3768
6863 6864 6862 6861 6857 6867 6868 6866 6865 6858 3760
3762
3760A
3762A
5119A 6893X
6893G
6814 6888 6888X 6883
6884
6893 5352R
5352X
2554 6878 5351
9090 6746 6747 3942X
3943X
3944X
6745 6842 6842R
6843 6843R
3956 3956R
3956X

Shock caps, aluminum (orange-anodized) (4) (fits all Ultra Shocks) Shock caps, aluminum (pink-anodized) (4) (fits all Ultra Shocks) Shock caps, aluminum (red-anodized) (4) (fits all Ultra Shocks) Shock rebuild kit (for 2 shocks) Shock shafts, hardened steel, titanium nitride coated (long) (2) Shock shafts, hardened steel, titanium nitride coated (xx-long) (2) Shock shafts, steel, chrome finish (long) (2) Shock shafts, steel, chrome finish (xx-long) (2) Silicone diaphragms (4) Spring pre-load spacers: 1mm (4)/ 2mm (2)/ 4mm (2)/ 8mm (2) Spring retainers, upper & lower (2)/ piston head set (2-hole (2)/ 3-hole (2)) Springs, front (progressive, +10% rate, pink) (2) Springs, front (progressive, +20% rate, blue) (2) Springs, front (progressive, -10% rate, green) (2) Springs, front (progressive, -20% rate, orange) (2) Springs, front (white) (progressive rate) (2) Springs, rear (progressive, +10% rate, pink) (2) Springs, rear (progressive, +20% rate, blue) (2) Springs, rear (progressive, -10% rate, green) (2) Springs, rear (progressive, -20% rate, orange) (2) Springs, rear (white) (progressive rate) (2) Ultra Shocks (black) (long) (complete w/ spring pre-load spacers & springs) (front) (2) Ultra Shocks (black) (xx-long) (complete w/ spring pre-load spacers & springs) (rear) (2) Ultra Shocks (grey) (long) (complete w/ spring pre-load spacers & springs) (2) Ultra Shocks (grey) (xx-long) (complete w/ spring pre-load spacers & springs) (rear) (2)
Slipper Clutch Components
Ball bearings, black rubber sealed (10x15x4mm) (2) Bearing adapter, 6061-T6 aluminum (blue-anodized) (1)/10x15x4mm ball bearing (black rubber sealed) (1) (for slipper shaft) Bearing adapter, 6061-T6 aluminum (green-anodized) (1)/ 10x15x4mm ball bearing (black rubber sealed) (1) (for slipper shaft) Differential kit, center (complete) Drive hub, center, rear (1)/ 4×3 GS (1) Drive hub, front, hardened steel (1)/ screw pin (1) Gear set, center differential (output gears (2)/ spider gears (2)/ spider gear shaft) Housing, center differential/ x-ring gaskets (2)/ ring gear gasket/ bushings (2)/ 5x10x0.5 TW (2)/ CCS 2.5×8 (4) Input shaft (slipper shaft)/ bearing adapter (1)/ pin (1) Rebuild kit (heavy duty), slipper clutch (steel disc/ aluminum friction pads (3)/ spring (1)/ 2×9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1)) Rebuild kit, slipper clutch (steel disc/ friction pads (3)/ spring (1)/ 2×9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1)) Screws, 3x6mm caphead machine (hex drive) (6) Slipper clutch, complete (for Slash 4×4) Slipper pressure plate and hub (alloy)
Spur Gears & Pinion Gears
Gear adapter, fixed Gear, 10-T pinion (32-p) (steel) (fits 3mm shaft)/ set screw Gear, 11-T pinion (32-p) (steel) (fits 3mm shaft)/ set screw Gear, 12-T pinion (32-p), heavy duty (machined, hardened steel) (fits 3mm shaft)/ set screw Gear, 13-T pinion (32-p), heavy duty (machined, hardened steel) (fits 3mm shaft)/ set screw Gear, 14-T pinion (32-p), heavy duty (machined, hardened steel) (fits 3mm shaft)/ set screw Gear, 9-T pinion (32-p) (steel) (fits 3mm shaft)/ set screw Spur gear, 50-tooth (0.8 metric pitch, compatible with 32-pitch) Spur gear, 50-tooth (0.8 metric pitch, compatible with 32-pitch) (for Slash 4×4 center differential) Spur gear, 52-tooth (0.8 metric pitch, compatible with 32-pitch) Spur gear, 52-tooth (0.8 metric pitch, compatible with 32-pitch) (for Slash 4×4 center differential) Spur gear, 54-tooth (0.8 metric pitch, compatible with 32-pitch) Spur gear, 54-tooth (0.8 metric pitch, compatible with 32-pitch) (for center differential) Spur gear, steel, 54-tooth (0.8 metric pitch, compatible with 32pitch) (for center differential)

6845A 6845G 6845T 6845R 6846 2742 1552 6845X 6742 6742X 6742G 6742R 2746
6748-BLK 3643X
3643G
3643R
3644X
3644G
3644R
5525 3739 6834 6742 6742X 6742G 6742R 3644
3643 5539
9916 2514 9917 9950 9909
5116 1747P 3647 1747R 1747G 1747T 1747A 1985 1647 2754

Steering Components
Drag link, machined 6061-T6 aluminum (blue-anodized) Drag link, machined 6061-T6 aluminum (green-anodized) Drag link, machined 6061-T6 aluminum (orange-anodized) Drag link, machined 6061-T6 aluminum (red-anodized) Linkage, steering (Revo) (3x20mm turnbuckle) (1)/ rod ends (2)/ hollow balls (2) Rod ends, long (6)/ hollow ball connectors (6) Screws, 3x8mm cap-head machine (hex drive) (6)/washers (6)/ wrench Steering bellcranks/ servo saver/ servo saver spring/ servo spring retainer/servo horn, steering Toe link, front & rear (molded composite) (2)/ hollow balls (4) (87mm center to center) Toe links (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (87mm) (2)/ rod ends (4) aluminum wrench (1) Toe links (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (87mm) (2)/ rod ends (4) aluminum wrench (1) Toe links (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (87mm) (2)/ rod ends (4) aluminum wrench (1) Washers, 3x6mm metal (12)
Suspension Linkage
Camber link set (plastic/ non-adjustable) (front &rear) (black) Camber links, front (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3×15 BCS (4) required for installation) Camber links, front (TUBES green-anodized, 7075-T6 aluminum, stronger than Titanium) (83mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3×15 BCS (4) required for installation) Camber links, front (TUBES red- anodized, 7075-T6 aluminum, stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3×15 BCS (4) required for installation) Camber links, rear (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (73mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3×15 BCS (4) required for installation) Camber links, rear (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (73mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3×15 BCS (4) required for installation) Camber links, rear (TUBES red- anodized, 7075-T6 aluminum, stronger than titanium) (73mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3×15 BCS (4) required for installation) Rod ends (12)/ hollow balls (12) Screw pin set (Rustler®/ Bandit/ Stampede®) Suspension pin set, complete (front and rear) Toe link, front & rear (molded composite) (2)/ hollow balls (4) (87mm center to center) Toe links (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (87mm) (2)/ rod ends (4) aluminum wrench (1) Toe links (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (87mm) (2)/ rod ends (4) aluminum wrench (1) Toe links (TUBES red- anodized, 7075-T6 aluminum, stronger than titanium) (87mm) (2)/ rod ends (4) aluminum wrench (1) Turnbuckles, camber link, 39mm (69mm center to center) (assembled with rod ends and hollow balls) (1 left, 1 right) (fits front & rear on Slash) Turnbuckles, camber link, 49mm (82mm center to center) (assembled with rod ends and hollow balls) (1 left, 1 right) Turnbuckles, camber links, 58mm (assembled with rod ends and hollow balls) (2)
Team Traxxas Items
Backpack, RC car carrier, 12″ x 12″ x 24″ (fits TRX-4 & similar) Decal sheet, racing sponsors Duffel bag, medium, 30″ x 12″ x 12″ (fits 1/10 Slash®, TRX-4®, & similar) Official Team Traxxas® racing decal set(flag logo/ 6-color) Traxxas® racing banner, red & black (3×7 feet)
Tires & Wheels
Ball bearings, blue rubber sealed (5x11x4mm) (2) Nuts, 4mm flanged nylon locking (aluminum, pink anodized) (4) Nuts, 4mm flanged nylon locking (steel, serrated) (8) Nuts, aluminum, flanged, serrated (4mm) (blue-anodized) (4) Nuts, aluminum, flanged, serrated (4mm) (green-anodized) (4) Nuts, aluminum, flanged, serrated (4mm) (orange-anodized) (4) Nuts, aluminum, flanged, serrated (4mm) (red-anodized) (4) PTFE-coated Washers, 5x8x0.5mm (20) (use with ball bearings) Silicone Grease Stub axle pins (4)

BFGoodrich and all associated names are trademarks used with permission. Distributed under license by Traxxas LP. Copyright © 2024 MNA, Inc. All rights reserved.

REV. 240408 1727

Page 7 Slash® 4X4 Brushless: TQTM 2.4GHz Radio (Model 68154-4) Parts List

5889R
5863R 6874R 6873R 6873X 5867 5880X 5878 6873A 5883A 5883 5863 5873X 6891R 5887R
6892R 5887 5869A 5867A 6891 5892G 5892 6873
6892 5889
5873 5873A

Tire & wheel assembled, glued (S1 compound) (SCT Split-Spoke black, satin chrome beadlock style wheel (dual profile 2.2″ outer 3.0″ inner), SCT off-road tires, foam inserts) (2) (4WD f/r, 2WD rear) (TSM® rated)
Tire & wheel assembled, glued (S1 compound) (SCT, black, orange beadlock wheels, SCT off-road racing tires, foam inserts) (2) (4WD f/r, 2WD rear) (TSM® rated)
Tire & wheel assy, glued (S1 compound) (SCT Split-Spoke satin chrome, black beadlock wheel, Kumho tire, insert) (2) (4WD front/rear, 2WD rear only)
Tire & wheel assy, glued (S1 compound) (SCT SS, chrome red beadlock wheel, BFGoodrich® Mud-TerrainTM T/A® KM2 tire, inserts) (2) (4WD f/r, 2WD rear)
Tire & wheel assy, glued (S1 compound) (SCT SS, satin chrome black beadlock wheel, BFGoodrich® Mud-TerrainTM T/A® KM2 tire, inserts) (2) (4WD f/r, 2WD rear)
Tire & wheel assy, glued (SCT chrome, red beadlock style wheels, BFGoodrich® Mud-TerrainTM T/A® KM2 tires, inserts) (2)(4WD front/rear, 2WD rear only)
Tire & wheel assy, glued (SCT satin chrome, beadlock style wheels, Kumho tires, foam inserts) (2) (4WD front/rear, 2WD rear only)
Tire & wheel assy, glued (SCT satin chrome, black beadlock wheel, BFGoodrich® Mud-TerrainTM T/A® KM2 tire, insert) (2)(4WD front/rear, 2WD rear only) Tire & wheel assy, glued (SCT Split-Spoke chrome, red beadlock style wheel, BFGoodrich® Mud-TerrainTM T/A® KM2 tire, inserts) (2) (4WD f/r, 2WD rear)
Tire & wheel assy, glued (SCT Split-Spoke, black, blue beadlock wheels, BFGoodrich® Mud-TerrainTM T/A® KM2 tire, inserts) (2) (4WD f/r, 2WD rear)
Tire & wheel assy, glued (SCT Split-Spoke, black, satin chrome beadlock wheels, BFGoodrich® Mud-TerrainTM T/A® KM2 tire, inserts) (2) (4WD f/r, 2WD rear)
Tire & wheel assy, glued (SCT, black, orange beadlock wheels, SCT off-road racing tires, foam inserts) (2) (4WD f/r, 2WD rear) (TSM® rated)
Tire & wheel assy, glued (SCTsatin chrome, black beadlock style wheels, SCT off-road racing tires, foam inserts) (2) (4WD front/rear, 2WD rear only)
Tires & wheels assembled, glued (S1 compound) (SCT SplitSpoke chrome, red beadlock style wheels, SCT off-road racing tires, foam inserts) (2) (4WD f/r, 2WD rear) (TSM® rated)
Tires & wheels, assembled, glued (S1 compound) (SCT chrome wheels, red beadlock style, dual profile (2.2″ outer, 3.0″ inner), SCT off-road racing tires, foam inserts) (2) (4WD f/r, 2WD rear) (TSM® rated)
Tires & wheels, assembled, glued (S1 compound) (SCT SplitSpoke satin chrome, black beadlock style wheels, SCT off-road racing tires, foam inserts) (2) (4WD f/r, 2WD rear) (TSM® rated)
Tires & wheels, assembled, glued (SCT chrome wheels, red beadlock style, dual profile (2.2″ outer, 3.0″ inner), SCT off-road racing tires, foam inserts) (2) (4WD f/r, 2WD rear) (TSM® rated)
Tires & wheels, assembled, glued (SCT chrome, blue beadlock style wheels, BFGoodrich® Mud-TerrainTM T/A® KM2 tires, foam inserts) (2) (2WD front)
Tires & wheels, assembled, glued (SCT chrome, blue beadlock style wheels, BFGoodrich® Mud-TerrainTM T/A® KM2 tires, foam inserts) (2) (4WD front/rear, 2WD rear only)
Tires & wheels, assembled, glued (SCT Split-Spoke chrome, red beadlock style wheels, SCT off-road racing tires, foam inserts) (2) (4WD f/r, 2WD rear) (TSM® rated)
Tires & wheels, assembled, glued (SCT Split-Spoke green wheels, SCT off-road racing tires, foam inserts) (2) (4WD f/r, 2WD rear) (TSM® rated)
Tires & wheels, assembled, glued (SCT Split-Spoke orange wheels, SCT off-road racing tires, foam inserts) (2) (4WD f/r, 2WD rear) (TSM® rated) Tires & wheels, assembled, glued (SCT Split-Spoke satin chrome, black beadlock style wheels, BFGoodrich® MudTerrainTM T/A® KM2 tires, foam inserts) (2) (4WD f/r, 2WD rear) (TSM® rated)
Tires & wheels, assembled, glued (SCT Split-Spoke satin chrome, black beadlock style wheels, SCT off-road racing tires, foam inserts) (2) (4WD f/r, 2WD rear) (TSM® rated)
Tires & wheels, assembled, glued (SCT Split-Spoke, black, satin chrome beadlock style wheel, dual profile (2.2″ outer, 3.0″ inner), SCT off-road racing tires, foam inserts) (2) (4WD f/r, 2WD rear) (TSM® rated)
Tires & wheels, assembled, glued (SCT, satin chrome wheels, beadlock type (dual profile 2.2″ outer 3.0″ inner), SCT off-road tires, foam inserts) (2) (Rear) (TSM® rated)
Tires & wheels, assembled, glued (SCT, satin chrome wheels, red beadlock, (dual profile 2.2″ outer 3.0″ inner), SCT off-road tires, foam inserts) (2) (Rear)

5873R
6871 6871R
5871 5871R 5353 5480X 5868A 5870A 5868 5872 5872X 5884A 5884 6872X 6872A 6872
5868X
3433X 3433 3436 3432 3431 8712
8720 8721 8722 8710
8711
8719
8716 8716X 8715 8715X 8714 2748R
3415

Tires & wheels, assembled, glued (SCT, satin chrome, red beadlock wheels, ultra soft S1 compound off-road racing tires, foam inserts) (2) (2WD Rear, 4WD F/R) Tires, BFGoodrich® Mud-TerrainTM T/A® KM2 (dual profile 4.3×1.7- 2.2/3.0″) (2)/ foam inserts (2) Tires, BFGoodrich® Mud-TerrainTM T/A® KM2 , ultra-soft (S1 offroad racing compound) (dual profile 4.3×1.7- 2.2/3.0″) (2)/ foam inserts (2) Tires, off-road racing, SCT dual profile 4.3×1.7- 2.2/3.0″ (2)/ foam inserts (2) Tires, Ultra soft, S1 compound for off-road racing, SCT dual profile 4.3×1.7- 2.2/3.0″ (2)/ foam inserts (2) Wheel nuts, splined, 17mm (blue-anodized) (4) Wheel wrench, splined, 17mm Wheels, SCT chrome, blue beadlock style, dual profile (2.2″ outer 3.0″ inner) (2) (4WD front/rear, 2WD rear only) Wheels, SCT chrome, blue beadlock style, dual profile (2.2″ outer, 3.0″ inner) (2) (2WD front only) Wheels, SCT chrome, red beadlock style, dual profile (2.2″ outer 3.0″ inner) (2) (4WD front/rear, 2WD rear only) Wheels, SCT satin chrome, beadlock style, dual profile (2.2″ outer 3.0″ inner) (2) (Rear) Wheels, SCT satin chrome, black beadlock style, dual profile (2.2″ outer 3.0″ inner) (2) (4WD front/rear, 2WD rear only) Wheels, SCT Split-Spoke, black, blue beadlock style, dual profile (2.2″ outer 3.0″ inner) (4WD f/r, 2WD rear) (2) Wheels, SCT Split-Spoke, black, satin chrome beadlock style, dual profile (2.2″ outer 3.0″ inner) (4WD f/r, 2WD rear) (2) Wheels, SCT Split- Spoke, chrome, green beadlock style, dual profile (2.2″ outer 3.0″ inner) (4WD front/rear, 2WD rear) (2) Wheels, SCT Split-Spoke, chrome, red beadlock style, dual profile (2.2″ outer 3.0″ inner) (4WD front/rear, 2WD rear) (2) Wheels, SCT Split-Spoke, satin chrome, black beadlock style, dual profile (2.2″ outer 3.0″ inner) (4WD front/rear, 2WD rear only) (2) Wheels, SCT, black, orange beadlock style, dual profile (2.2″ outer 3.0″ inner) (4WD f/r, 2WD rear) (2)
Traxxas Tools
Body reamer (aluminum handle) Body reamer (plastic handle) Cap, body reamer Scissors, curved tip Scissors, straight tip Speed Bit Essentials Set, hex and nut driver, 7-piece, includes premium handle (medium), travel pouch, hex drivers (straight: 1.5mm, 2.0mm, 2.5mm) and nut drivers (5.0mm, 5.5mm, 7.0mm, and 8.0mm), 1/4″ drive Speed bit handle, large (overmolded) Speed bit handle, medium (one piece) Speed bit handle, premium (rubber overmold) Speed Bit Master Set, hex and nut driver, 13-piece, includes premium handle (medium), travel pouch, hex drivers (straight: 1.5mm, 2.0mm, 2.5mm, 3.0mm), (ball-end: 2.0mm, 2.5mm, 3.0mm), and nut drivers (4.0mm, 4.5mm, 5.0mm, 5.5mm, 7.0mm, 8.0mm), 1/4″ drive Speed Bit Master Set, hex driver, 7-piece straight and ball end, includes premium handle (medium), travel pouch, hex drivers (straight: 1.5mm, 2.0mm, 2.5mm, 3.0mm) (ball end: 2.0mm, 2.5mm, 3.0mm), 1/4″ drive Speed Bit Master Set, nut driver, 6-piece, includes premium handle (medium), travel pouch, and nut drivers (4.0mm, 4.5mm, 5.0mm, 5.5mm, 7.0mm, 8.0mm), 1/4″ drive Speed Bit Set, hex driver, 2-piece ball-end (2.0mm, 2.5mm), 1/4″ drive Speed Bit Set, hex driver, 3-piece ball-end (2.0mm, 2.5mm, 3.0mm) 1/4″ drive Speed Bit Set, hex driver, 3-piece straight (1.5mm, 2.0mm, 2.5mm), 1/4″ drive Speed Bit Set, hex driver, 4-piece straight (1.5mm, 2.0mm, 2.5mm, 3.0mm), 1/4″ drive Speed Bit Set, screwdriver, 3-piece straight (3mm slotted, #1 Phillips, and #2 Phillips bits), 1/4″ drive Tool set (includes 1.5mm hex wrench / 2.0mm hex wrench / 2.5mm hex wrench/ 4-way wrench/ 8mm & 4mm wrench/ U-joint wrench) Tool set with pouch (includes 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4mm drivers/4mm. 5mm, 5.5mm, 7mm, and 8mm nut drivers/ 2mm, 3mm, and 4mm slotted screwdrivers/ #00 Phillips, #0 Phillips, and #1 Phillips screwdrivers/ 4mm and 8mm wrenches/ driver handle)

BFGoodrich and all associated names are trademarks used with permission. Distributed under license by Traxxas LP. Copyright © 2024 MNA, Inc. All rights reserved.

REV. 240408 1727

Page 8 Slash® 4X4 Brushless: TQTM 2.4GHz Radio (Model 68154-4) Parts List

3643X
3643G
3643R
3644X
3644G
3644R
5525 6742 6742X 6742G 6742R 3644
3643 5539

Turnbuckles & Threaded Rods
Camber links, front (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3×15 BCS (4) required for installation) Camber links, front (TUBES green-anodized, 7075-T6 aluminum, stronger than Titanium) (83mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3×15 BCS (4) required for installation) Camber links, front (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3×15 BCS (4) required for installation) Camber links, rear (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (73mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3×15 BCS (4) required for installation) Camber links, rear (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (73mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3×15 BCS (4) required for installation) Camber links, rear (TUBES red- anodized, 7075-T6 aluminum, stronger than titanium) (73mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3×15 BCS (4) required for installation) Rod ends (12)/ hollow balls (12) Toe link, front & rear (molded composite) (2)/ hollow balls (4) (87mm center to center) Toe links (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (87mm) (2)/ rod ends (4) aluminum wrench (1) Toe links (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (87mm) (2)/ rod ends (4) aluminum wrench (1) Toe links (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (87mm) (2)/ rod ends (4) aluminum wrench (1) Turnbuckles, camber link, 39mm (69mm center to center) (assembled with rod ends and hollow balls) (1 left, 1 right) (fits front & rear on Slash) Turnbuckles, camber link, 49mm (82mm center to center) (assembled with rod ends and hollow balls) (1 left, 1 right) Turnbuckles, camber links, 58mm (assembled with rod ends and hollow balls) (2)

If you have questions or need technical assistance, call Traxxas at:
1-888-TRAXXAS
(1-888-872-9927) (U.S. residents only)
For orders, calls outside the U.S., and other information, call 972-549-3000, or fax to 972-549-3011 e-mail Traxxas at support@Traxxas.com
TRAXXAS.com

BFGoodrich and all associated names are trademarks used with permission. Distributed under license by Traxxas LP. Copyright © 2024 MNA, Inc. All rights reserved.

REV. 240408 1727

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals