DRYFAST DWM12000 Axial Fan Instruction Manual
- September 28, 2024
- DRYFAST
Table of Contents
DRYFAST DWM12000 Axial Fan
Specifications
- Article code: DWM12000
- Air flow: Max. air pressure
- Connection voltage
- Recommended fuse
- Power consumption
- Noise level
- IP protection class
- Mobility
- Dimensions L x W x H
- Weight
Product Information
The drum fan DWM12000 comes in black for inconspicuous use on stages and at events. It features a vertically adjustable discharge direction and airflow adjustable in 3 positions. This compact fan offers a large air displacement.
Product Usage Instructions
General Use
The fan comes with 3 different speeds. Turn the fan on by rotating the
switch knob to speed 1, 2, or 3. To turn the fan off, rotate the switch knob
to 0.
Emergencies
- In case of an emergency, turn off the unit and unplug it immediately.
- Secure the area and evacuate everyone from potential danger zones.
- Do not reconnect a defective device.
Troubleshooting
Please note that electrical faults should only be handled by qualified
personnel.
Failure: Fan gives insufficient capacity
Possible Cause: …
Removing Faults: If the unit still doesn’t work properly, contact the dealer where you purchased the fan.
FAQ
-
Q: What should I do in case of an emergency?
A: In case of an emergency, immediately turn off the unit, unplug it, secure the area, and evacuate everyone from potential danger zones. -
Q: How many speeds does the fan have?
A: The fan comes with 3 different speeds that can be adjusted using the switch knob.
Instruction manual
Fan
DWM12000
Operating manual
This operating manual may not, without the written permission of the
manufacturer, be reproduced duplicated or distributed.
Important: Read the manual carefully before use. Keep the manual for future reference.
General information
Product: Axial fan
Type: DWM12000
The drum fan DWM12000 comes in black for the most inconspicuous use on stages
and at events, the discharge direction is vertically adjustable and also the
airflow is adjustable in 3 positions. It is a compact fan with a large air
displacement.
Safety warning
- Always disconnect the appliance electrically before moving it or performing maintenance.
- Always operate the unit on a power source with the same voltage, frequency, and power as indicated on the product identification plate.
- Non-qualified service technicians should not assemble, disassemble, or repair the fan.
- The air inlet – and outlet must be clear at all times.
Emergencies
- In an emergency, make sure that the appliance is switched off as soon as possible and that the plug is removed from the socket.
- Secure the environment, get people out of a possible danger zone.
- Do not reconnect a defective device!
- Non-qualified service technicians should not assemble, disassemble, or repair the fan.
- Do not use or place the device in rooms or environments with explosion hazard.
- Do not use the device in aggressive atmospheres.
- Do not use the device on a metal surface.
- Do not use the device around children.
- Do not puncture or burn the device.
- Place the device stably on a solid surface.
- Do not use or operate the device with damp or wet hands.
- Do not expose the device and plug to water.
- Never insert objects or limbs into the device.
- Do not cover the device during operation.
- Do not sit on the device.
- The device is not a toy. Keep children and animals away.
- Do not leave packaging material lying around. It can be dangerous for children.
- Only use the device under supervision.
- Before each use of the device, check its accessories and connection parts for possible damage. Do not use defective devices or parts.
- Ensure that all electrical cables outside the device are protected from damage (e.g. by animals). Never use the device with damage to electrical cables or the mains connection!
- Insert the plug into a fused socket.
- When using extension cords, unwind the extension cord completely. Prevent electrical overload.
- Before maintenance, care or repair work, turn off the appliance and unplug the power cord (when doing so, do not pull the cord from the plug).
- Turn off the appliance and remove the power cord from the outlet when not in use.
- Never use the device if you notice damage to power cord or plug.
- When setting up the device, ensure that it is at a sufficient distance from walls and objects as well as from storage and operating conditions.
- Do not remove any safety symbols, stickers or labels from the device. Keep all safety symbols, stickers and labels in a legible condition.
- To reduce the risk of fire or electric shock, do not operate the fan with external speed controls.
General use
The fan comes with 3 different speeds. Turn the fan on by turning the switch
knob to speed 1,2 or 3. To turn the fan off, turn the switch knob to 0.
Emergencies
- In the event of an emergency, be sure to turn off the unit as soon as possible and unplug it.
- Secure the area, get everyone out of a possible danger zone. 3. Do not reconnect a defective device!
Maintenance and cleaning
- Unplug the fan and clean it with a soft cloth.
- Clean only with a damp cloth or compressed air.
- After maintenance, replace the protective grille before using the fan again.
Storage
- Store the units in a clean, dry interior to ensure a long life.
- Never store the devices dirty.
Warranty
- Warranty applies only to appliances purchased from Dryfast (through a dealer).
- The manufacturer provides a one-year manufacturer’s warranty from the date of purchase on all parts except the power cable.
- In case of any modification both electrical and mechanical, as well as misuse of the appliance through incorrect voltage use, the guarantee becomes null and void.
- To obtain replacement parts under guarantee you must be able to present the proof of purchase.
Specifications
| Article code | DWM12000 |
|---|---|
| Air flow | position 1: 9 .000 m³/h _position 2: 10 .200 m³/h position 3: |
11 .700 m³/h_
Max . air pressure| 95 Pa
Connection voltage| 230V / 50 Hz
Recommended fuse| 16 A
Power consumption| position 1: 220 W
position 2: 245 W
position 3: 265 W
Noise level| position 1: 52 dBA
position 2: 60 dBA
position 3: 65 dBA
IP protection class| IP24
Mobility| mobile
Dimensions L x W x H| 740 x 295 x 765 mm
Weight| 18 kg
Troubleshooting
Please note that electrical faults should only be rectified by qualified personnel only.
| Failure | Possible cause | Removing faults |
|---|---|---|
| Fan gives insufficient capacity |
- Fan motor defective
- Capacitors defective
- Suction/exhaust openings are dirty
- Supply voltage too low
|
- Replace fan motor
- Checking capacitors
- Cleaning the suction/exhaust openings for proper air flow
- Check power supply voltage
Fan vibrates|
- Imbalance in the fan motor or impeller .
- Fan motor defective
- Insufficient stability in the arrangement of the fan
|
- Fan motor replacement / impeller balancing or replacement
- Exchange fan motor
- Optimize fan stability
If the unit is still not working properly, contact the dealer where you purchased the fan.
Spare-parts & exploded view drawing DWM12000
| Nr. | Description | Article code |
|---|---|---|
| 1 | Diffuser discharge side | on request |
| 2 | Fan blade | on request |
| 3 | Frame | on request |
| 4 | Casing | on request |
| 5 | Grille suction side | on request |
| 6 | Fan motor | on request |
| 7 | Button switch (black) | VKSCTT12000 |
| 8 | Power cable | VVK230VC |
CE-declaration DWM12000
More information?
Do you have any questions or need more information about the CE declaration?
Please contact Dryfast at info@dryfast.eu
Dryfast Ltd.
Units 1 & 2, The Meadow
Alms Close
Stukeley Meadows Industrial Estate
Huntingdon, Cambridgeshire
PE29 6AJ, UK
Telephone: +44 (0) 1480 594012
Email: info@dryfast.uk
Website: www.dryfast.uk
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>