Diglo HW-LDHSK2 Hard Wired Doorbell Kit Instructions

: September 26, 2024
: diglo

Table of Contents

Diglo HW-LDHSK2 Hard Wired Doorbell Kit
Product Information
Product Usage Instructions
Description
Features / Specs
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Diglo HW-LDHSK2 Hard Wired Doorbell Kit

Product Information

Specifications

Model: HW-LDHSK2
Power Source: Hard-wired 24VDC
Features: Field selectable strobe color & audible tone
Distributor: HEAR WORLD COMMUNICATIONS
Contact: 301-926-2365
Website: www.hearworldusa.com

Product Usage Instructions

Installation

Turn off power to the existing doorbell circuit at the breaker box.
Remove the old doorbell button and chime from the wall.
Connect the new HW-LDHSK2 doorbell kit according to the provided wiring diagram.
Mount the new doorbell button and chime in the desired locations.
Turn the power back on and test the doorbell.

Operation
To select the desired strobe color and audible tone, refer to the user manual for specific instructions as these settings may vary based on model versions.

Maintenance
Regularly check the functionality of the doorbell kit by testing it at least once a month. Clean the doorbell button and chime as needed to ensure proper operation.

Troubleshooting
If the doorbell kit is not working properly, refer to the troubleshooting section of the user manual or contact HEAR WORLD COMMUNICATIONS for assistance.

FAQ

Q: How do I change the strobe color and audible tone?
A: Refer to the user manual for detailed instructions on how to adjust these settings based on your specific model.
Q: Can I install this doorbell kit myself?
A: Yes, you can install the HW-LDHSK2 doorbell kit following the provided installation instructions. However, if you are unsure or uncomfortable with electrical work, it’s recommended to seek professional help.

Description

The HW-LDHSK2 Kit is a 24 volt DC doorbell system designed for apartments, hotel rooms and other areas designed to assist those with audible, visual, or physical impairments. The kit consists of one combination horn/strobe (audible & visual), one power supply and one single gang backlight doorbell push button plate. Each visual appliance strobe strength can be field adjusted to obtain different colors. The horn signal has switch selection for different sound outputs. Each signal is provided with a multi-color strobe, rotary switch SW1 and SW2 for the horn. SW1 parameters: 0=Strobe OFF, 1=Amber/Yellow Strobe, 2=Clear/White Strobe, 3=Green Strobe, 4=Blue Strobe, 5=Red Strobe. SW2 parameters: 0=Horn OFF, 1=Chime Continuous, 2=Chime Temporal pattern, 3=Horn Continuous, 4=Horn Temporal pattern, 5=Doorbell/Ding Dong.

The switching power supply can power up to 5 horn/strobes. The power supply is rated for 1.0Amp at 24VDC, but you should always use the “80% rule” when sizing the power consumption needs, which means don’t account for more than .80Amp. The notification mounting bracket can be mounted universally to single gang, double gang, 4 square, and many more boxes. Unit dimensions: 5” (12.7 cm) high x 5.0” (12.7 cm) wide x 2.0” (5.08 cm) deep.

Features / Specs

Notification appliances meet ANSI/UL 464, ANSI/UL 1971, and UL 1638.
24VDC power supply rated for 1.0A, 110/220VAC input, =/- 15%
The power supply includes an enclosure
The power supply operating temperature range is -20 ~ +70°C
The doorbell is mounted on a single gang SS plate with flying leads on the back
White backlight push button
Field selectable strobe lens colors: amber, clear, blue, green and red
Field selectable audible sound output: chime continuous, chime temporal, horn continuous, horn temporal, or doorbell tone (ding dong)
Input terminals accept 14 to 18 AWG wire
Nominal voltage 24VDC
Unit Dimensions: 5” (12.7 cm) high x 5.0” (12.7 cm) wide x 2.0” (5.08 cm) deep
Product compliance with NFPA 72, IBC/IFC/IRC
One-year warranty